2013 Honda Pilot Ex-l Sunroof Rear Cam Htd Leather 10k Texas Direct Auto on 2040-cars

Auto blog

A closer look at the motorcycle El Chapo used to escape prison

Joaquin Archivaldo Guzman Loera, better known by his nickname, El Chapo, stands five-feet, five-inches tall. This defining trait – his nickname, not coincidentally, can be translated as "Shorty" in Spanish – is an important detail in his escape, as the tunnel that stretched a mile underground that led the drug kingpin to safety measures just one inch taller than Guzman's height. Clearly, this was a well-planned and executed escape. The tunnel that was custom-sized to perfectly fit El Chapo started at an abandoned building in the middle of an empty field and ended in a tight shaft that led to the shower stall in Guzman's jail cell. In between those start- and finish-points was an impressively dug-out hole in the Earth, complete with ventilation shafts, wiring for electricity and lights, and rails on the bottom to serve as tracks for a custom-built motorcycle that El Chapo apparently rode to freedom. There are specific traits that could be useful in figuring out what kind of motorcycle we're looking at. All of these facts are well-known to anyone who's been following the story of how the most notorious criminal in Mexico could escape from a maximum-security prison in broad daylight. Especially considering that this event marks the second time since 2001 that Guzman has arranged his own prison break. There's one detail, though, that has caught our attention. A close look at the images released by Mexican authorities shows us a motorcycle that's been heavily modified specifically to work underground. We can't be certain, based on the grainy shots and limited viewing angles of the pictures we have access to, but there are some specific traits that could be useful in figuring out what kind of motorcycle we're looking at. For starters, there's the engine. It's a single-cylinder, air-cooled powerplant, canted slightly forward. The exhaust exits on the right side of the bike, when looking from above, and there's a short chain guard on the opposite side. Granted, that doesn't narrow it down all that much. A look at the shape of the fins on the cylinder and the shape of the head, though, makes us think this may be one of Honda's ubiquitous CG-series of engines. A quick look at the bike's frame shows a single downtube, dual shocks and a steel-tube swingarm. That means it's probably not of particularly recent vintage, but we can't really pinpoint exactly what model it may be.

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.

Honda Ridgeline to take two-year dirt nap before resurrection

Three years ago, Honda said there would be no new-generation Honda Ridgeline coming in 2011. In late 2011, when there was still no word on a replacement for the little truck that's been carrying on pretty much the same since 2006, within the space of a month both Honda's US truck planner and the CEO of American Honda said the Ridgeline would continue and that it was an integral part of the lineup.
But that doesn't mean it can't take a two-year timeout. A report in Ward's Auto says that the Lincoln, AL plant that builds the Ridgeline will cease its production in September, 2014 and a new one won't arrive until 2016. That's a walk-back from when the plan was to have the current truck run until a week before the next-generation truck went into production. Even so, Honda still says the Ridgeline isn't going away forever, a company spokesman telling Ward's, "Ridgeline continues to be an important part of our lineup."
2016 is a long way away, though, and we all know how quickly a product line put into a coma can end up suffering fatal consequences. Even though we keep talking about the Ridgeline, perhaps what Honda is actually saying is that the small pickup market is important to them, and they're working on a way to take better advantage of it than the Ridgeline was doing. We'll find out one way or the other in three years.