$37,430 Msrp 4x4 Ex-l Rear Entertainment Moonroof 8-passenger 1-owner on 2040-cars

Auto blog

2019 VW Jetta vs. 2019 Honda Civic vs. 2019 Kia Forte: How they compare

The 2018 Detroit Auto Show was dominated by trucks, but there were also two all-new and completely redesigned compact sedans introduced: the 2019 VW Jetta and the 2019 Kia Forte. Follow their respective links to read our first driving impressions of each, but in short, both compacts are better positioned to steal potential customers away from the segment-leading 2019 Honda Civic, which itself was updated for 2019. Besides taking a look their specs and photos, I had the chance to go between them all here in Detroit, crawl around their interiors, sit in the backseats and figure out which of these not-especially-compacts, which all grew with their latest redesigns might have a practicality advantage. We also have full specifications on each model, which are laid out in the handy chart below. Exterior design There's honestly a little bit of the previous-generation Jetta visible in the 2019 Forte profile — especially around the doors and greenhouse. The Jetta, meanwhile, has the same sort of radically swept-back roofline as the Civic that's become all the rage throughout the automotive industry. The 2019 Jetta is also a little more visually interesting than the car it replaced, though neither the Jetta nor the Forte were as radically transformed as the Civic was two years ago. Alright, let's go to the slideshows. View 20 Photos 2019 Kia Forte View 61 Photos View 28 Photos Engines and transmissions The 2019 Jetta, 2019 Forte and 2019 Civic have considerably different powertrain options, with additional choices possible once the VW and Kia go deeper into their lifespans. Both the Forte and Civic rely on naturally aspirated four-cylinder engines in base specification, with the Civic's 2.0-liter engine making more power and a smidgen more torque than the Kia's. The Jetta goes the turbocharged small-displacement route with its 1.4-liter engine. It makes the same power as the Forte, but smacks down both in the torque department. It makes roughly 50 more pound-feet of twist than both naturally aspirated engines. The Honda Civic is the only one to offer an optional engine, which follows in the footsteps of the Jetta as a turbocharged 1.5-liter four-cylinder. Its 174 horsepower is ahead of the others by nearly 40 ponies. However, its 162 pound-feet of torque still falls short of the Jetta. Impressively, all three sedans still offer a manual transmission option, and all of them are six-speed units.

Honda's new hybrid will cut use of rare-earth metals

Honda will start selling a hybrid vehicle later this year that will reduce the use of rare-earth metals in the hybrid-electric motor's magnets. The Japanese automaker worked with Japanese metal supplier Daido Steel Co. to develop a process that eliminates the use of rare-earth elements such as terbium or dysprosium. The first vehicle to feature this process will be the Honda Freed subcompact minivan, which is based on the platform of the Fit and will go on sale in Japan later this year. The new technology will help free Honda from its dependence on China, which produces about 90 percent of the world's rare-earth metals. The new process uses what's called the "hot deformation method" to eliminate the need for the heavier metals and likely reduce hybrid-engine costs. Honda's new hybrid motors use a lighter rare-earth material called neodymium. With both electric and hybrid vehicle production forecast to grow within the next few years, rare-earth metal demand is forecast to rise by 14 percent a year to more than $9 billion by 2019, Automotive News says, citing an estimate from technology-research company Technavio Research. Honda estimates that the new process cuts the cost of making the motors' magnets by about 10 percent while reducing their weight by about eight percent, Reuters says. Additionally, neodymium is found in Australia and North America, as well as China. Honda has been selling a gas-powered version of the Freed in Japan since 2008. Three years later, Honda started selling a hybrid version of the minivan, which was rated to get 51 miles per gallon on the Japanese driving cycle. Related Video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. Daido Steel and Honda Adopt World's First Hybrid Vehicle Motor Magnet Free of Heavy Rare Earth Elements – Honda Freed, on sale this fall, will be the first hybrid vehicle to adopt new magnet – Daido Steel Honda TOKYO, Japan, July 12, 2016 - Daido Steel Co., Ltd. and Honda Motor Co., Ltd. became the world's first companies to achieve practical application of a hot deformed neodymium magnet containing no heavy rare earth*1 and yet with high heat resistance properties and high magnetic performance required for the use in the driving motor of a hybrid vehicle. This heavy rare earth-free hot deformed neodymium magnet will be applied first to the all-new Honda FREED, scheduled to go on sale this fall.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.