2005 Honda Odyssey Touring - Fl Car - 2 Owners - Navigation - Leather - on 2040-cars

Auto blog

Honda getting in on the Daytona Prototype racing action

Racing fans at Sebring are plenty used to seeing Honda powering into the winner's circle, the Japanese motor company having claimed class victories at the endurance race in Florida in 2007, 2009, 2011, 2012 and 2013. Those were all in the LMP2 category, but with the Twelve Hours of Sebring now part of the combined United SportsCar Championship, Honda is branching out into another class: Daytona Prototypes.
The purpose-built racing machinery that were once part of the Grand-Am series are now racing alongside the LMP2 prototypes from the American Le Mans Series under the united championship. So far Ford and Chevy have signed on to power the Daytona Prototypes, and now Honda's joining their ranks as the only manufacturer to field entries in both categories of the championship's Prototype class.
The competition-spec 3.5-liter twin-turbo V6 revealed last month is based on the same J35 engine that powers everything from the Honda Accord to the Acura RLX and MDX. Now it will power the Riley chassis fielded by Starworks Motorsports, competing alongside the pair of Honda Performance Development (HPD) ARX-03b chassis which Extreme Speed Motorsports will campaign under LMP2 regulations, giving Honda a two-pronged, three-car assault on the top class of the new American sports car racing series.

Why Honda of America won't fit 2014 Fit models with start/stop

One of the most recent yet notable additions to the modern vehicle's growing suite of fuel-saving technologies is the humble start-stop system. It's rather simple - when the vehicle is stopped, the engine shuts off. It then fires back up when the driver starts to take his foot off the brake or step on the clutch. For one of the most important fuel sippers of the year, though, start-stop tech is a no-go.
Honda will not be offering the system on the North American-spec, non-hybrid Fit despite it being a standard item on both the hybrid (pictured above) and gas-only Japanese domestic models. According to Honda, it's ostensibly due to the momentary lag, that occurs when the gas engine re-fires and power is available. The start-stop-equipped Fits "will lose at stoplights to V6s," Nobuhiko Shishido, the lead powertrain engineer for the Fit, told Automotive News. This is just an observation on our part, but unless the new Fit turns up with dramatically more than the current car's 117 horsepower, it'll "lose at stoplights" regardless of whatever fuel-saving features are fitted.
The other issue Honda sees is more realistic. In the world of the EPA, stop-start systems are not taken into account in fuel economy testing. That makes the cost-adding technology a tough sell for US consumers who are forced to take a dealer's word on real-world economy gains over the milage numbers on the window sticker. That said, wouldn't it at least make sense to offer start-stop as an option? Have your say in the Comments below.

Honda recalls small number of 2016 CR-V models for airbags

Thought you'd heard the last bit of news regarding exploding airbags from Takata? Think again. Honda has issued a recall for the 2016 CR-V to replace driver-side front airbag modules. Fortunately, only 515 vehicles are covered by this recall, and only 30 affected models were actually in the hands of consumers. And, if you own a 2016 CR-V and haven't gotten a phone call from Honda, you're apparently in the clear. On October 10, 2015, an airbag inflator made by Takata ruptured in Monclova, Mexico, while being tested. Two days later, Takata notified Honda and the National Highway Traffic Safety Administration, prompting this recall. According to Honda's official announcement, though, this faulty inflator is not believed to be the same issue that caused automakers around the globe to recall 19.2 million (and counting) vehicles to replace defective airbag modules that were also made by Takata. Whether that's comforting or not, we'll let you decide. We've included both the official recall notice from NHTSA and the statement from Honda below. Here's hoping the faulty inflator that caused this recall was nothing more than a single defective part. Related Video: RECALL Subject : Driver Side Air Bag Inflator may Rupture Report Receipt Date: OCT 29, 2015 NHTSA Campaign Number: 15V714000 Component(s): AIR BAGS Manufacturer: Honda (American Honda Motor Co.) SUMMARY: American Honda Motor Company, Inc. (Honda) is recalling certain model year 2016 CR-V vehicles manufactured October 12, 2015, to October 19, 2015. The metal housing surrounding the driver's air bag inflator in these vehicles may have been manufactured incorrectly. CONSEQUENCE: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death. REMEDY: Honda will notify owners, and dealers will replace the driver side frontal air bag module, free of charge. The recall is expected to begin December 4, 2015. Owners may contact Honda customer service at 1-800-999-1009. Honda'a number for this recall is JV9. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. Statement by American Honda Regarding Driver Front Airbag Module Recall: 2016 Honda CR-V Oct 30, 2015 - TORRANCE, Calif.