2021 Honda Hr-v Ex-l on 2040-cars

Auto blog

Japanese automakers ramping production for renewed American sales

The 2011 earthquake and tsunami that struck Japan took quite the toll on the automotive industry in that nation. Not content to lean on that tragedy as excuse for slagging sales, the Japanese automakers are planning on a major production expansion in North America. The aim is to reclaim the market share lost from the Tsunami-based dip, and overcome a dollar/yen exchange rate that makes exporting to America unprofitable.
Following the Tsunami, Japanese automakers ramped up production in their North American facilities to compensate, but according to Automotive News, Nissan, Honda and others have all reported plans for still-further increased production in the year ahead. As part of this ramp-up, Mazda will open a facility in Salamnca, Mexico before March of 2014. Part of that increase in output is 50,000 units of a Toyota-badged compact car, which Mazda will produce.
Other Mexican production facilities opening include a Honda plant, which will open in Spring 2014 in Celaya, and a Nissan plant, set to open later this year in Aguascalientes. Nissan also said that it will need another plant in North America within the next five years. According to Nissan Boss Carlos Ghosn, the company aims to raise its stake in the US market from 8 percent to 10, and adding production will help achieve that goal. Even Mitsubishi is aiming to boost production at its Normal, Illinois plant. Production of the Outlander Sport is currently at 50,000, which Mitsubishi wants to raise to 70,000.

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.

Honda's hot new Civic Type R finally hatches in production form [w/video] [UPDATE]

UPDATE: A previous version of this article incorrectly indicated that the vehicle in question is the most powerful hot hatch ever made. As some commenters pointed out, the Ford Focus RS500 was more powerful by some 40 horsepower. We've updated the text below accordingly. Takanobu Ito may be stepping down as president and CEO of Honda, but as far as performance machinery is concerned, he'll be leaving the company in good shape. Not only has he ushered Honda back into Formula One – reviving the legendary partnership with McLaren – but he's also brought back two performance icons: the NSX and the Civic Type R. The former is making its European debut here at the Geneva Motor Show after its premier in Detroit, but alongside it we're seeing for the first time the production version of the latter. Not that it's exactly our first look at the new hot hatch. We've seen it testing, seen a couple of concept versions and even drove an early prototype. But after that whole lengthy process, it's finally here. (Or there, we should say, because it won't be coming to America. At least not in its current form.) What we're looking at, according to the manufacturer, is not only the fastest and most powerful front-drive hot hatch it's ever made, but on the market altogether. It packs a 2.0-liter VTEC turbo four kicking out 306 horsepower and 295 pound-feet of torque – the most powerful production engine the company has ever offered – said to be enough to propel the new Civic Type R to 62 in 5.7 seconds and on to a top speed of 167 miles per hour. That's a whole lot of muscle to channel to the front wheels, but Honda's surely done its best to keep it all under control. It's got an old-school six-speed manual transmission, electric power steering, 19-inch wheels, Brembo brakes, adaptive dampers and a suspension designed to combat torque steer and tuned to enhance high-speed stability and support hard cornering. In addition to extensive testing at locations including the Nurburgring, Suzuka and the company's own Takasu test track, the new Civic Type R has also undergone considerable CFD and wind tunnel testing to tune the aerodynamics. The resulting appendages may be toned down slightly from the concepts, but still make quite a visual impact – to say nothing of generating much-needed downforce to keep this sucker glued to the road or track.