2008 95245 Miles Sport Used 1.5l I4 Manual Fwd Hatchback 1 Owner Clean Carfax on 2040-cars

Auto blog

Acura NSX prototype gets back on track

Developing a new vehicle is not without its complications, we're sure, but usually things follow a fairly predictable progression: you develop a prototype, you test it, test it and test it again, then you put it into production. What you don't expect is that your prototype will burn to the ground, but that's what famously happened to the NSX which Honda engineers were testing a few months ago.
Fortunately, the Acura NSX prototype is back on track, both literally and figuratively, as you can see from this latest batch of spy shots snapped at the Nürburgring. This camouflaged prototype looks pretty much the same as the last one, only, you know... less crispy. Which is to say, it looks pretty much ready to hit showrooms.
The naysayers may point out that Honda chose colder and damper weather to put the NSX back into testing - thereby mitigating the risk of another fire - but we're sure the Japanese automaker has been working hard to fix the flammability issues, whatever may have caused them, over the past few months. At least, we hope they have.

2014 Honda HPD CR-Z

Honda invited us to its Southern California North American headquarters last week to take a spin in a very special CR-Z - one modified with a full complement of Honda Performance Development (HPD) components. While the company has been racing with HPD parts for years, this is the first time the automaker has offered them for its street-legal vehicles, and it has chosen this year's SEMA Show in Las Vegas to be the launch venue. Last year, Honda introduced the HPD Supercharged CR-Z Concept at SEMA - this is the slightly modified production version.
The complete transformation gives the normally placid hybrid hatchback a serious shot of adrenaline thanks to a bolt-on supercharger combined with suspension, tire, brake and exhaust upgrades. In addition to the blower (detailed in a bullet point below), new HPD suspension components lower the car by about half an inch, and firmer spring rates stiffen the ride. Stock 16- or 17-inch wheels are then replaced with HPD 18-inch alloys wrapped in sticky Michelin Pilot Super Sport tires (215/40ZR18 at all corners). The clutch is upgraded, a limited-slip differential is installed and new HPD monobloc four-piston calipers are fitted over slotted and ventilated iron rotors up front (the single-pistons over solid discs on the back axle are unchanged). In the rear, the stock hidden single exhaust pipe is replaced by a free-flow twin-tip exhaust that peers out of a new HPD lower diffuser. Other cosmetic enhancements include an HPD front lip spoiler, rear deck lid spoiler and an HPD emblem kit for each side. To say the CR-Z is transformed by the complete HPD package is an understatement.
Driving Notes

Honda, Top Gear working on 130-mph lawn mower

We're not even sure they've got a blade of Kentucky Bluegrass to cut, but the folks at Top Gear have gone ahead and started building what will become, if they're successful, the world's fastest lawn mower. Actually, it appears Top Gear is not doing much of the design and assembly work at all, instead having solicited help from experts at Honda and Team Dynamics, which oversees the automaker's touring car efforts.
What the three are working on is a riding lawnmower with a 110-hp engine that can reach 60 miles per hour in four seconds and trim turf at speeds up to 130 mph. If they succeed, such a maximum velocity would put them well ahead of the current record for the world's fastest lawnmower, which is 96.529 mph set by Bobby Cleveland and his Snapper race mower at the Bonneville Salt Flats in September of 2010. Top Gear hasn't said whether or not it will officially go after Cleveland's record, but the build will be featured in an upcoming issue of the Top Gear magazine and is scheduled to be completed by June 17, so we may learn what this maniacal mower's true purpose is then.
According to TG's report on how the build is going, as well as the video of it being fired up (literally) for the first time below, there aren't many actual mower parts left on this machine. What started out as a Honda HF2620 mower now sports wheels and tires from a racing quad, a back axle from a go-kart, a steering rack from a Morris Minor and a 1000cc engine from a Honda VTR1000F sport bike. All that remains from the original mower are the pedals and body panels; even the steel cutting deck has been replaced with a lighter fiberglass version. And blades? This mower will be bladeless, instead using two electric motors to spin lengths of brake cable like a weed whacker.