1.6l Front Wheel Drive Tires - Front On/off Road Tires - Rear On/off Road on 2040-cars

Auto blog

Honda and Acura recall 124,077 vehicles due to potential brake failure

Honda and Acura are recalling 124,077 total vehicles across numerous model lines due to a part in the brake system that was potentially improperly assembled, which could ultimately lead to brake failure. The models affected include the 2020-2021 Honda Civic, 2020-2023 Ridgeline, 2021-2023 Passport, 2021-2022 Pilot and the 2020 Acura MDX. As for the issue itself, Honda says the brake master cylinder “may have been improperly fastened to the brake booster assembly during production.” Specifically, the tie rod fastener is the problem point. Honda says that if it was improperly assembled, that could result in loose or missing tie rod nuts. If this is the case, when you hit the brakes, a bending load can be placed on the brake booster tie rod studs, which could in turn cause the tie rod studs to break. This then allows the brake master cylinder to separate from the brake booster, which Honda says could result in diminished or lost brake function. Honda says it received a report of brake failure on a 2021 Pilot last year, which prompted the companyÂ’s investigation. There are no crashes, injuries or deaths related to this issue, according to Honda, but it has received two related warranty claims since September 2022. Owner notifications are scheduled to begin on August 7 this year. Honda says it will inspect and replace any missing nuts, and if any brake booster assembly components are damaged, those will be replaced, too. Related video: Recalls Acura Honda Truck Crossover Hatchback SUV Sedan

Acura NSX production delayed

Listeners of the Autoblog Podcast will be familiar with my opinions on the Acura NSX. While I love the idea of Acura building a halo car again, I've routinely joked on-air that the car will never, ever reach production and will continue being teased and previewed ad nauseam. So I'm chuckling at this news: the NSX is being delayed again. To be fair, while it sounds like a big deal – pushing the NSX back from model year 2016 to 2017 – this is a fairly minor delay in the grand scheme. Instead of starting production this fall, as previously announced, the new supercar will start rolling down the line at Honda's Marysville, OH factory in the spring. "Trial production" has already started, Honda says, while briefly acknowledging the delay in the attached press release. While Honda offered no reason for the delay in volume production, Automobile claims it's the fault of the move to fit two turbochargers to the V6, which was made midway through development. Fitting the two iron lungs meant rearranging the six-pot into a longitudinal layout. Here's hoping there are no further delays. Scroll on for a look at Honda's press release, which does its best to gloss over the NSX delay while talking about the company's new Performance Manufacturing Center in Marysville. Related Video: Performance Manufacturing Center: Precision Craftsmanship Aug 14, 2015 - CARMEL-BY-THE-SEA, Calif. The next-generation Acura NSX is produced at the new, dedicated Performance Manufacturing Center (PMC) in Marysville, Ohio, using domestic and globally sourced parts. With trial production already underway and production start-up scheduled for spring 2016, this world-class manufacturing facility employs groundbreaking techniques in weld, body construction, body painting, final assembly and quality confirmation to ensure the highest levels of precision and craftsmanship. More details on the unique and innovative manufacturing processes at the PMC will be rolled out over the months leading up to the start of production, but the following highlights of the new facility were shared during the 2015 Monterey Automotive Week: Innovative blend of people and technology: throughout the PMC, NSX production is centered around the skills of approximately 100 experienced engineers and technicians building the NSX to precise levels of quality and craftsmanship.

Honda Civic Tourer Concept shows the shape of European things to come [w/video]

Honda will be expanding its European Civic range this year, and our first glimpse at the shape of things to come arrives in the form of this Tourer Concept at the 2013 Geneva Motor Show. According to Honda, this swoopy concept provides a look at the upcoming Civic Tourer production model, which is set to be revealed in Frankfurt this September.
The Tourer Concept very obviously builds on the design groundwork set by the latest Civic hatchback when it first debuted in 2011. That means there are sharp, angular elements found up front and a sloping roofline that rakes down at the rear. Combine that with the large, concept-spec wheels and the funky front lighting elements, and what we have here is a really attractive little wagon - something that will no doubt battle the new Toyota Auris Touring Sports and Volkswagen Golf Variant that are also making their debut here in Switzerland.
It goes without saying, but don't expect to see this Euro Civic show up in the United States anytime soon. After all, we have the "there, I fixed it" 2013 sedan and coupe to keep us happy. Scroll down for all of the wagony details, including a video.