2012 Civic Natural Gas W/navi Polished Metal Metallic on 2040-cars

Auto blog

eBay Find of the Day: Ayrton Senna's 1993 Honda NSX

It's not often that things owned by the late Ayrton Senna come up for sale, but the seller of this black-on-black 1993 Honda NSX (aka, Acura NSX) eBay find claims it was once owned by the Formula One legend, and that he left a footprint on the factory carpet that can still be seen today. (Footprint, or vacuum lines?...)
NSX no. T000999 was given to Senna as a gift from his mentor and sponsor, Antonio de Almeida Braga, the seller claims, and it was stored at a palace near the Estoril F1 circuit in Portugal. He also was known to drive two other NSXs, a black one and a red one - the latter in which he was seen often.
The seller claims to have owned T000999, which is still in Portugal, for 17 years, and the 31,000-mile odometer indicates it was driven about 1,500 miles per year on average. Thankfully the car has been kept stock, so whoever buys it can enjoy driving it just as Senna did - that is, if the car actually is what it's claimed to be. If the story checks out, then this is one valuable NSX, which is reflected in the high minimum starting bid of 47,500 pounds ($73,620). There have been no bids at time of writing, but with nine days left in the auction, we'll be keeping our eyes on this one.

There was once a Honda Civic named the Honda Integra

So it turns out there was a Honda Integra that was actually a Honda Civic. This as opposed to the Honda Integra we already knew about that was just like our Acura Integra but with Honda badges sold in different markets. We noticed the oddity while crawling about used car listings (as one is wont to do). A sedan popped up that looked suspiciously like a mid-90s Honda Civic, but there was a shiny Integra badge on the back of it. Surely, this must be somebody’s idea of being funny, right? Wrong. The Honda Integra SJ exists, and itÂ’s essentially a rebadged Honda Civic Ferio. Or "Civic Sedan" as we knew it here. In other words, that means Honda sold two Honda Integras at the same time. One of them was the Integra that we all think of upon hearing the Integra name. The other was just a Civic Ferio that was half-prettied up to increase its appeal. After all, the Integra name was luxury. Maybe you already knew all of this, but the lack of definitive information online and presence of this car for sale prompted us to do a little research. In case you were wondering, SJ stands for Sedan Joyful, so this carÂ’s full name is the Honda Integra Sedan Joyful. It was sold as such from 1996-2001 in Japan. Its mini Wikipedia entry indicates that Honda created the SJ to bring a formal sedan to the Integra range. ThatÂ’s a bit weird, though, as there was literally an Integra four-sedan at the time. You could even get it as the hot GS-R version in the United States. Japanese buyers were even luckier, as Honda offered a sedan version of the Integra Type R there. Since the Integra SJ was a rebadged Civic Ferio, it came with the same equipment and engine. The 1.5-liter D15B four-cylinder engine was being used in the Ferio at this time, so thatÂ’s what the Integra SJ was rocking. ItÂ’s one of HondaÂ’s SOHC VTEC offerings, and it made a very respectable 128 horsepower. The D15B wasnÂ’t as potent as an engine like the B16A2 found in the 1999-2000 Honda Civic Si sold here that put out 160 horses, but it was also down one camshaft. Only the intake valves are affected by the cam here, which results in less power than the DOHC VTEC engines. All that said, the engine still revved to 7,200 rpm, and its power is respectable for the size of car.  ThereÂ’s a third name for the Civic Ferio/Integra SJ, as well. If you go to Thailand, you may come across the Isuzu Vertex, which is yet another rebadged Civic Ferio.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.