2019 Honda Civic Type R Touring on 2040-cars

Auto blog

2016 Honda Pilot is brand's first non-hybrid with stop-start

Honda has gotten rid of the boxy styling of the outgoing Pilot for a more aerodynamic look that mimics its smaller sibling, the popular CR-V. The 2016 Honda Pilot – which goes on sale this summer – has a larger, eight-inch display screen, an improved navigation system and up to five USB ports to power the family's devices. The new Pilot was introduced at the 2015 Chicago Auto Show this week. New amenities include an optional heated steering wheel and heated second-row seats. Under the hood is a new 3.5-liter, direct injected V-6 engine with start-stop technology – Honda calls it " Idle Stop technology" – to save on fuel. Buyers can choose one of two new transmissions, a six-speed or a nine-speed, and front-wheel-drive or all-wheel-drive configurations. Green Car Congress notes that this is the first time Honda has put stop-start technology into a non-hybrid vehicle. Fuel economy wasn't announced, but increased use of lighter materials has dropped 300 pounds of weight, so the new Pilot should beat the old model's 25 mpg on the highway. New safety features include LED high beams that automatically dim for oncoming traffic and Honda's first road departure mitigation system - borrowed from Acura - which monitors the vehicle's road position and can correct the steering or brake if it senses an imminent collision. Related Video: The AP contributed to this report. Featured Gallery 2016 Honda Pilot: Chicago 2015 View 19 Photos News Source: Honda, Green Car Congress Green Chicago Auto Show Honda mpg stop start

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video:

Acura NSX GT3 non-hybrid racecar on sale soon

Just over a year ago, Acura debuted the NSX GT3, the FIA GT3-spec racecar based on the automaker's latest and greatest. While it took years for the road car to hit the streets, the NSX GT3 was developed in a relatively short amount of time. This year, the car competed in several races under the factory banner, racking up 50,000 miles and two race victories. Today, Honda and Acura announced the NSX GT3 will go on sale for private teams. Think of the NSX GT3 as a stripped out version of the standard NSX sans hybrid system. The 3.5-liter twin-turbo remains, but, since there are no electric motors up front, all the power is sent to the rear wheels through a XTRAC semi-automatic 6-speed sequential transmission. The chassis is built in Ohio right alongside the regular NSX. The same goes for the engines. The block, heads, valve train, crankshaft, pistons, and dry-sump lubrication system are the same specification as the production car. Final assembly is completed in Italy. This past year, the NSX GT3 competed under the Acura banner in the WeatherTech SportsCar Championship GTD class and the Pirelli World Challenge GT category. In addition to those series, the car is built to compete in the Blancpain GT Series and 24 Hours Nurburgring in Europe, the Super GT GT300 class in Japan, as well as other GT3-spec race series. Different divisions of Honda will be handling global sales, with HPD responsible for the North American market. US pricing hasn't been announced, but converting the European models start at about $545,000. Now we just want to see a lightened, non-hybrid version of the NSX on the street. Related Video: Featured Gallery Acura NSX GT3 View 11 Photos Image Credit: Honda Motorsports Acura Honda Coupe Racing Vehicles Performance honda nsx acura nsx gt3