Ex Navigation All Power Cruise Alloy on 2040-cars

Auto blog

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.

2015 Civic Type R will make 'at least' 276 hp from 2.0L turbo [w/video]

Honda may not actually be showing off the production form of its upcoming Euro-only 2015 Civic Type R at the Frankfurt Motor Show this year, but it did take advantage of the focused media attention to make a pretty cool announcement. In addition to dropping a really hot video of the new Type R testing at the Nürburgring Nordschleife, Honda Europe president, Manabu Nishimae, gifted us with some juicy details about the coming hot hatch.
Nishimae confirmed rumors that this Type R would make use of a turbocharged 2.0-liter engine, while telling us that the mill would be good for an output of "at least 280 PS." A raw conversion from PS (metric horsepower) to standard horsepower gives us a figure of about 276 hp, or very near the rumored figure of 300 galloping, front-wheeled ponies.
The company will need each ounce of output from its new 2.0-liter engine if it is to meet its stated performance target: making the Civic Type R the fastest front-wheel-drive production car around the 'Ring. Apparently this last session of testing, with World Touring Car Championship driver Gabriele Tarquini at the wheel, has already gotten Honda close to the lap record. Scroll down to read Honda's brief press release about the upcoming Type R, and, more importantly, to listen to the car as it's throttled around the track.

2017 Honda Ridgeline enters the landscape block war

In the test of pickup truck beds, if steel is apples and aluminum is oranges, Honda wants you to know that composites are pineapples. Chevy recently performed a test in which its own Silverado was pitted against its most obvious competitor, the Ford F-150. A loader dropped over 800 pounds of landscaping blocks into the two truck beds, and Ford's aluminum bed ended up with more damage than Chevy's steel bed. Check that test out right here. Honda apparently wasn't content to let Chevy throw stones alone. In a new test, the Japanese automaker replicated the block-drop test using its brand-new Ridgeline truck, which features a composite bed. As you'll see in the video above, there was very little damage to the high-strength plastic bed of the Ridgeline after a similar load of landscaping blocks were dropped from a loader. Without being on hand at any of these tests, we can't say with any degree of certainty that they match up in severity. But they all look pretty similar, and this is actually a test that Honda performed in front of journalists ( ourselves included) earlier this year. We visually inspected the composite bed of a Ridgeline after a demonstration just like the one on video above, and can confirm that there was basically no damage to Honda's truck. Chevy went an extra step by flinging a heavy toolbox into the Silverado and F-150; Honda didn't match that particular test. Does any of this matter? That's up to truck buyers and owners to decide, naturally, but we doubt anyone would actually dump a load like this into their own truck. And it's also worth noting that a heavy-duty spray-on bedliner would probably minimize damage to the metal surface below, whether steel or aluminum. If nothing else, it's memorable marketing. Related Video: