2014 Honda Cr-v Lx on 2040-cars

Auto blog

Honda getting in on the Daytona Prototype racing action

Racing fans at Sebring are plenty used to seeing Honda powering into the winner's circle, the Japanese motor company having claimed class victories at the endurance race in Florida in 2007, 2009, 2011, 2012 and 2013. Those were all in the LMP2 category, but with the Twelve Hours of Sebring now part of the combined United SportsCar Championship, Honda is branching out into another class: Daytona Prototypes.
The purpose-built racing machinery that were once part of the Grand-Am series are now racing alongside the LMP2 prototypes from the American Le Mans Series under the united championship. So far Ford and Chevy have signed on to power the Daytona Prototypes, and now Honda's joining their ranks as the only manufacturer to field entries in both categories of the championship's Prototype class.
The competition-spec 3.5-liter twin-turbo V6 revealed last month is based on the same J35 engine that powers everything from the Honda Accord to the Acura RLX and MDX. Now it will power the Riley chassis fielded by Starworks Motorsports, competing alongside the pair of Honda Performance Development (HPD) ARX-03b chassis which Extreme Speed Motorsports will campaign under LMP2 regulations, giving Honda a two-pronged, three-car assault on the top class of the new American sports car racing series.

Honda S660 Kei car makes you want to jump in and drive

We want the Honda S660. In fact, after seeing the freshly debuted production model, it's fair to say the kei roadster has already leapt to the very tip-top of our forbidden fruit list. Considering our newfound love for the tiny two-seater, you, dear reader, are going to have to put up with a lot of S660 content in the coming weeks. First up, we have what's called nori-setsu, or "riding instructions." Honda recruited a pair of gymnasts, who use their talents to slide, creatively, into a mockup of the S660. While the acrobats make it look easy, we imagine the amount of space in the S660 makes slotting into the driver's seat off a pommel horse is somewhat dangerous, hence the padding and mocked-up roadster. Fortunately, when an actual S660 is brought out to play, the gymnast finds a more conventional means of getting behind the wheel. Check out the video.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.