2014 Honda Cr-v Ex-l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Watch us put the 2017 Honda Ridgeline through its paces

If you're in the market for a truck, as yourself: Why do I need a pickup? Driving back and forth to work, picking up all the random bits needed to keep your yard looking beautiful, and even hauling a dirtbike or two requires a different set of capabilities than towing a classic car in an enclosed trailer. If your plans skew more toward the lighter-duty side of things, you owe it to yourself to consider the 2017 Honda Ridgeline. It's a unibody pickup, as opposed to competitors like the Chevy Colorado and Toyota Tacoma, which use a traditional body-on-frame design. That brings a lot of benefits, but it also introduces some compromises. The video above covers all these aspects, from everyday comfort to off-road capability. After driving the Ridgeline back-to-back with its rivals, we found plenty of reasons why Honda's truck deserves a closer look.

Honda recalling 143K Civic, Fit models for CVT

Honda is recalling 143,676 examples of the 2014-2015 Civic and 2015 Fit for a problem with the way that its software controls the CVT. Currently, the system uses high hydraulic pressure in the transmission at times, which can put stress on the drive pulley shaft. Also, some of those parts "may have been produced at the low end of the hardness specification" during manufacturing, the automaker reports. When the two factors are combined over time, the high pressure could cause the shaft to break. If this happens, it would result in losing drive to the front wheels or in them locking up. According to documents submitted to the National Highway Traffic Safety Administration (as a PDF), Honda received the first report of a shaft breaking in July 2014 in the US, and there was a wheel lockup in Canada in January 2015. As of September 3, there were 23 warranty claims about this issue but no reported injuries. The fix will be an update to the CVT's software, and the recall will begin October 16, according to NHTSA. Honda is urging owners to get their vehicles repaired as soon as they receive the notification. Related Video: Statement by American Honda Regarding CVT Drive Pulley Shaft Recall: 2014-2015 Civic and 2015 Honda Fit Oct 1, 2015 - TORRANCE, Calif. Honda will voluntarily recall approximately 143,000 model-year 2014-2015 Civic and 2015 Fit vehicles in the United States to update the software that manages the continuously variable transmission (CVT), free of charge. Affected vehicles have CVT control software that is written to use high hydraulic pressure during certain CVT operation modes, which as a result may subject the drive pulley shaft to high stress. In addition, during manufacturing of the drive pulley shaft, some parts may have been produced at the low end of the hardness specification. If shafts with lower hardness are repeatedly subjected to the specific high hydraulic pressure modes, it may result in the shaft breaking during operation. If the drive pulley shaft breaks, the vehicle may lose acceleration or the front wheels may lock up while driving, increasing the risk of a crash. No crashes or injuries have been reported related to this issue, which was discovered through the warranty claim process in the United States. Honda is announcing this recall to encourage each owner of an affected vehicle to take it to an authorized dealer as soon as they receive notification of this recall from Honda.