2002 Honda Crv Ex Awd on 2040-cars

Auto blog

2016 Honda Pilot packs more of everything

Honda has come a long way over the course of its history, evolving from motorcycles to automobiles, marine engines, power equipment, robots and even jet aircraft. But its biggest push over the past couple of decades has been in crossovers and SUVs. From the Passport that was rebadged from the Isuzu Rodeo in the early 90s, Honda's high-riding lineup has expanded to include the CR-V, the smaller HR-V, the oddball Crosstour, the soon-to-be-updated Ridgeline pickup, a smattering of luxury crossovers from Acura, and this, the biggest of them all, the Pilot. And Honda has just revealed an all-new version here at the Chicago Auto Show. Now in its third generation, the all-new 2016 Honda Pilot is, like its predecessors, a three-row family-hauler. Compared to the decidedly boxy model it replaces, the new Pilot is certainly more dynamically styled to more closely match the latest crossovers in the Honda lineup, but it may start to resemble the Odyssey minivan (with which it shares its underpinnings) too closely for some tastes. The new Pilot is three inches longer than the model it replaces, primarily to the benefit of cargo space: Honda says you can now fit a full-size 82-quart cooler in the back without infringing on the third row of seats – ingress and egress from which are now enabled by a power folding second row that opens a wider aperture to the back to more easily fit in all eight passengers. (That is, unless you go for the available second-row bucket seats that reduce capacity to seven.) Interior amenities are increased all around, with a proliferation of power outlets and connectivity ports and an available panoramic roof. Despite the growth, though, the new Pilot is 300 pounds lighter than the model it replaces. It is also built on a more solid platform, to the benefit of handling, crashworthiness and NVH insulation. Of course the new Pilot benefits from all the latest safety and driver-assist systems, and Honda anticipates top ratings from both the National Highway Safety Administration and the Insurance Institute for Highway Safety. Power comes from a 3.5-liter V6 with all the tricks in the book (short of a hybrid assist) to make it as economical as possible. The i-VTEC engine has direct injection, cylinder deactivation, stop/start ignition and an automatic transmission with either six or (for the first time from Honda) nine speeds, depending on the trim level. Buyers will also be able to choose between front- or all-wheel drive.

Acura reveals performance EV concept called Performance EV Concept

After teasing a new EV concept for Monterey, Acura made good on its promise Thursday with the unveiling of its rather plainly named Performance EV Concept. Good news: Acura's first in-house EV will be a performance car. Bad news: It's not the one we all hoped it would be. Instead, we're getting another model in the grand tradition of the ZDX — pronounced front end and all. It seems that look is here to stay, so get used to it, because Acura says it plans to build a production model based on this concept starting in late 2025.  That's noteworthy not just because this is Acura's first in-house EV, but because it'll be the first production car to ride on any variant of Honda's new BEV architecture. The mainstream brand is planning to put something based on its 0 Series "Saloon" concept into production in 2026. That's quite the coup (no "e") for Acura, which spent most of the past two years talking about the Ultium-based ZDX project, which by all accounts will be the first and last Acura-badged product of Honda's tie-up with General Motors and its Ultium EV platform.  As you can probably surmise, Acura remains tight-lipped about specifics. Honda (and by extension, Acura) "concept" vehicles have a funny habit of being put into production almost exactly as they sit, so what you see here is likely pretty close to the mystery CUV's final physical form, but battery and motor specs remain nebulous for the time being. We expect a multi-motor setup engineered to mimic the behavior of the SH-AWD system Acura offers in its ICE vehicles. The concept's massive 23-inch wheels encircle a set of four-piston calipers and crossed-drilled rotors — the two most significant hints that we're looking at something meant to move quickly.  If you're in Northern California for Car Week, you can check out Acura's concept at The Quail. The company's presentation is scheduled for 10:36 a.m. local time (What is this, a train schedule?) on Friday. 

Acura NSX will use Cosworth block, plus other neat tidbits

The blue NSX you see here was built just two weeks ago. Prototype number six, it rolled off Acura's newest assembly line in Ohio and was rushed out to the Monterey peninsula for various car week activities. We had a chance to sit down with several members of the NSX team to discuss the car, the long road from concept to production, and some interesting details. Below are some choice bits from our conversations. Acura is pretty proud of the fact that NSX version 2.0 was designed and is being built in the US. The new assembly line, called the Performance Manufacturing Center, is in Honda's hometown of Marysville, Ohio. While the line is brand new, the building has seen many uses over its lifetime, most recently as a warehouse facility. PMC staff numbers about 100, with 60 technical and 40 non-technical associates. The car uses parts sourced globally, and one of those sources is Cosworth. The engine blocks and heads come from the English firm and get assembled into twin-turbo powerhouses at Honda's nearby Anna, Ohio, engine plant. The Cosworth name is rarely associated with a bad engine, so we were geeked to hear the NSX's 550-plus-horsepower hybrid powertrain has good genes. Acura hasn't decided how many cars will come to the US each year, but supplies will be limited. We're told there is a total figure for global sales – basically anywhere Honda and Acura vehicles are sold – but they're not ready to divulge that number. Dealer allocation is also yet to be sorted out, although we're told that any dealer that has the necessary tools and equipment to service the new NSX will be able to sell them. Acura currently has 272 US dealers. The switch from the transverse engine originally planned to a longitudinal twin-turbo engine threw everyone involved for a loop. The designers had to lengthen their nearly finalized design, and the engineers working on the production process had to revise or redo much of their work. Though we've been waiting a while for the car since the concept first surfaced in 2012, it's pretty amazing to think that the car was engineered one and a half times and a new factory was built in about three years. But yeah, it's delayed, with series production now set to commence in the spring of 2016. One result of the switch to a longitudinal engine is a transmission hump in the cargo area aft of the engine. The hold is still sized to fit a bag of golf clubs, though it will be a tight fit.