2002 Honda Cr-v Ex Sport Utility 4-door 2.4l on 2040-cars

Auto blog

Acura NSX GT3 to make public debut this week at Mid-Ohio

The new Acura NSX had a very long and very public gestation period. The car went through a number of redesigns and revisions, all while enthusiasts watched and waited. With the production version just now ramping up for customer deliveries, Acura revealed that it was working on a race car for FIA GT3 homologation. While the car was shown in New York, no one outside of Honda has seen it testing on track. This week, the NSX GT3 will make its public testing debut at Mid-Ohio Sports Car Course ahead of the Pirelli World Challenge and IndyCar races. View 13 Photos While the car will be on track during testing and practice sessions, it won't actually be competing with the rest of the field. The car is still in the testing phase and won't be fully FIA approved until at least September. Acura is confident that the car will make its racing debut in 2017. The company also made it clear that this is not the final version of the car and that things like aero and engine tuning are still being worked out. Until now, the NSX GT3 has only tested at private events in Europe, Japan and the US. This week, the NSX GT3 will be piloted by Dutch racing driver Peter Kox. Kox drives for RealTime Racing, a team that currently campaigns an Acura TLX GT. This week's car will be the primary tester, though if something goes sideways there are multiple backup cars. The NSX GT3 differs in a number of ways from the road car, most notably its lack of hybrid all-wheel drive system. The NSX GT3 uses the same twin-turbocharged V6 as the road car, but sends all the power through the rear wheels. It also uses the same space frame as the road car. While the road going version receives final assembly in Honda's Ohio factory, final touches to the GT3 car are done elsewhere. Although the car will only be testing on Thursday and Friday, it will be on display all weekend in the paddock. For more info on this weekend's Mid-Ohio race, check out the Pirelli World Challenge page here. Related Video: Motorsports Acura Honda honda nsx acura nsx gt3

Honda and Acura render their future visions for Shanghai

With the Shanghai Motor Show coming up later this month, Honda has released a couple of teaser sketches for two concept vehicles that will be making global debuts. Aside from the renderings, there is no information about either the Honda or Acura concept vehicles, but we can tell that both are some sort of utility vehicle, be they of crossover or people-mover variety.
The text for both images indicates that both concepts show future products that will be launched in China, but there is no mention as to what other markets the automaker has planned for these vehicles. In addition to these two concepts, the NSX Concept and 2014 RLX from Acura will make their Chinese debuts, and Honda says it "will display models substantially identical to the mass-production version of the Concept C and Concept S." The Concept C is will be a "middle-class" sedan built for China, and the Concept S, an MPV that will primarily serve China as well.

22,000 Honda Shadow 750 motorcycles recalled [UPDATE]

Update: Honda's statement on the recall is now embedded below. The Basics: Honda will recall 22,142 examples of its 2010-2016 VT750 Shadow motorcycles, including the 2012-2014 VT750CA, VT750C2 and VT750C2F; 2011-2016 VT750C; 2013-2016 VT750CS; 2010-2016 VT750C2B; and 2013-2014 VT750C2S. The Problem: Engine vibration can cause a wire for the bank angle sensor to rub against the joint connector on the wire harness. This can eventually cause a loss of the signal, and the engine could stall. Injuries/Deaths: None reported. The Fix: Dealers will replace the bank angle sensor and move the joint connector. If You Own One: Honda expects the recall to begin February 19. More Information: Documents from the National Highway Traffic Safety Administration (as a PDF) report Honda received five warranty claims and five field reports about this issue as of December 14, 2015. Related Video: RECALL Subject : Engine Stall from Loss of Sensor Signal Report Receipt Date: DEC 23, 2015 NHTSA Campaign Number: 15V874000 Component(s): ELECTRICAL SYSTEM Potential Number of Units Affected: 22,142 All Products Associated with this Recall Vehicle Make Model Model Year(s) HONDA VT750 2010-2016 Details Manufacturer: Honda (American Honda Motor Co.) SUMMARY: Honda (American Honda Motor Co.) is recalling certain model year 2012-2014 VT750CA, VT750C2 and VT750C2F, 2011-2016 VT750C, 2013-2016 VT750CS, 2010-2016 VT750C2B and 2013-2014 VT750C2S motorcycles. Engine vibration may cause the bank angle sensor wire to rub on the wire harness joint connector, resulting in a loss of the sensor signal. CONSEQUENCE: Without the bank angle sensor signal, the engine may stall while riding, increasing the risk of a crash. REMEDY: Honda will notify owners, and dealers will relocate the joint connector and replace the bank angle sensor, free of charge. The recall is expected to begin February 19, 2016. Owners may contact Honda Motorcycle customer service at 1-866-784-1870. Honda's number for this recall is JW7. NOTES: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov. American Honda Statement on VT750 Recall Honda has issued a Safety Recall of some 2010-2016 model-year VT750 motorcycles. It is possible that long term exposure to engine vibrations may cause the bank angle sensor wiring to break, or be damaged, which could cause the engine to stall and increase the risk of a crash.