2009(09) Honda Accord Ex Only 33995 Miles! Clean! Must See! Save Huge!!! on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

SAE World Congress: Honda FCEV fuel cell stack has cells just 1 mm thin

The only update we have for people who are paying ultra-close attention to the progress of the hydrogen-powered Honda FCEV concept is that we now know how thin the individual cells in the car's fuel cell stack are. Speaking at the 2015 SAE World Congress in Detroit this week, American Honda Motor Company Manager of fuel cell vehicle marketing, Steve Ellis, told AutoblogGreen that the fuel cell stack is now 33-percent smaller and offers a 60-percent improvement in power density. We knew this already. What we didn't know is how Honda got there. Ellis said that these improvements are due in part to a reduction in the size of the fuel cell thickness. Each cell in the stack is one millimeter thick, he said. For everyone who isn't counting the millimeters of this car, here's the broader situation. Honda and the state of California (and others) are working hard on getting H2 infrastructure up can running. "The stations are accelerating as we speak," Ellis said. Three new stations have opened in the last few months and the state has pledged $20 million per year until there are 100 stations in California. Honda has also invested in FirstElement to install stations. The production FCEV will feature a range of over 300 miles and have a three-to-five minute refueling time. The car will launch in Japan in March 2016, with US and European sales starting at some unspecified time after that.

Honda Project 2&4 concept has 212 hp, 893 lbs, and our hearts

Take one look at the Honda Project 2&4 concept, and it's immediately clear that the minimalist track special is the result of a collaboration between automotive and motorcycle designers. The body's styling is a modernized take on the Japanese brand's RA272 Formula One car from the 1960s, but then you notice the weird driver's seat that's fully exposed and suspended just inches above the road. The result is a vehicle that looks absolutely deadly, but like an absurd thrill to pilot, too. The Project 2&4's floating seating design simultaneously evokes both a sport bike and a go-kart. There's no dashboard or windshield at all, and the driver simply gets a steering wheel and a glass panel for the instruments. It's hard to imagine pairing things down much more than this, especially since the whole vehicle weighs just 893 pounds. The concept's other major piece of motorcycle DNA is the mid-mounted 1.0-liter V4 sourced from Honda's RC213V that races in MotoGP. Tuned here for road use, it puts down over 212 horsepower when spinning at 13,000 rpm, and peak torque of 87 pound-feet hits at a still stellar 10,500 rpm. The redline is at a stratospheric 14,000 rpm. The high-revving engine bangs through the gears through a six-speed dual clutch transmission. Unfortunately, the Project 2&4 has zero provisions for even a modicum of driver safety, and that makes it exceedingly unlikely for one to ever see customer orders. We still look forward to seeing that bizarre, floating seat on display at the 2015 Frankfurt Motor Show, though. HONDA PROJECT 2&4 POWERED BY RC213V TO DEBUT AT FRANKFURT: A COMBINATION OF GLOBAL CREATIVITY AND CRAFTSMANSHIP Winner of Honda's 'Global Design Project' to debut at the Frankfurt Motor Show Cabin-less structure features a floating seat design for immersive driving experience Powered by Honda's MotoGP RC213V engine, modified to run on public roads 'Honda Project 2&4 powered by RC213V', the winning entry from Honda's 'Global Design Project', will make its global debut at the 66th Frankfurt Motor Show at stand B11 in Hall 9.0. Embodying the concept of 'creative craftsmanship', Honda Project 2&4 celebrates Honda's position as the world's leading engine manufacturer, providing engines to 28 million people per year across two- and four-wheel automotive, power equipment, marine and aerospace applications.