2004 Honda Accord Ex Sedan - 5 Speed Manual - Sold & Serviced Here ( 1371a ) on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Bisimoto's 911 and Honda Odyssey each pack 1,000 hp

There aren't a lot of vehicles on the road that pack a thousand horsepower. The Bugatti Veyron and McLaren P1 are in rare company, but there have been a handful of aftermarket tuners that have managed to extract that much power out of lesser vehicles. Bisimoto is responsible for more than its fair share, so Matt Farah and the team at Drive stopped by the workshop in Southern California to check out the craftsmanship for the latest episode of Tuned. What they found is two vehicles with that astronomical four-figure output that otherwise couldn't be more different from each other. First up is the vintage, stripped-out 911 that company founder Bisi Ezerioha built for himself. It's based on a 1976 Porsche 911 Carrera with a widebody kit and a pair of turbochargers hanging off the back. The result is that thousand-horsepower output and, as Farah found out, one of the scariest, hairiest, and squirliest automobiles ever devised. As if that weren't enough, there's a thousand-horsepower minivan on the docket, too. This one is based on a Honda Odyssey, rebuilt on an air suspension and a six-speed manual gearbox conversion out of an Acura TL. And of course the engine's been tuned to deliver that headline output figure. Honda and Bisimoto showcased the vehicle at the SEMA show a couple of years ago, where Farah says he didn't think it could possibly hold together. But as he discovered in the video above, it actually does, and accelerates with tenacity... and plenty of room for the kids.

A look inside Honda’s “Safety For Everyone” research and development operation

RAYMOND, Ohio—As part of its long-running “Safety for Everyone” campaign, Honda has established the audacious goal of what it calls a “zero-collision society.” But rather than making big claims about developing a fully-autonomous vehicle, which Honda hasnÂ’t done, the company is trying to chip away at the more than 37,000 vehicle-related fatalities that occurred in the U.S. in 2017 with a multi-pronged approach. Here in central Ohio, engineers are working with state-of-the-art facilities and equipment to boost active safety systems like its HondaSensing suite of safety technology with old fashioned passive systems like structural steel frames or new airbag designs that protect passengers in a crash. Honda provided members of the press with a rare tour inside its Honda R&D Americas headquarters this week. Honda officials say that increasingly, safety — and specifically, third-party ratings from the likes of the National Highway Safety Traffic Administration and the Insurance Institute for Highway Safety — figure into the top three factors consumers weigh when purchasing a vehicle. Honda and Acura have 10, 2019 models that have earned IIHSÂ’s Top Safety Pick or Top Safety Pick+ ratings, and all 15, 2019 model-year Honda and Acura vehicles that have undergone NHTSA crash testing have earned a 5-star overall rating. And Honda prides itself on its growing list of safety firsts, including the first upward-deploying front passenger airbag, in 1990 in the Acura Legend; first omni-directional crash-test facility, in 2000; and the first autonomous braking system, in the 2006 Acura RL. It hopes its new three-chamber airbag goes industry-wide and joins that list. “ItÂ’s part of our companyÂ’s culture,” said Art St. Cyr, business head unit and vice president of auto operations for American Honda Motor Co. “We have a philosophy at Honda that we want to be a company that society wants to exist. That means we have to protect our customers. ThatÂ’s part of the whole mantra of doing this.” Opened in 1984, the 1.6 million square-foot Honda R&D Americas facility, located in the countryside about 45 miles northwest of Columbus, employs around 1,600 people and is HondaÂ’s largest research-and-development facility outside of Japan. Its Advanced Safety Research facility opened in 2003.