2000 Accord Ex Sedan V6 Automatic Runs Great Good Condition on 2040-cars

Auto blog

Honda insiders push for Acura NSX Type R sans hybrid tech

With 500 horsepower on tap from a sophisticated hybrid powertrain, there's plenty to love about the new Acura NSX. If the more performance-oriented elements within the Japanese automaker get their way, it could get even better. Speaking with one of the NSX project's chief engineers Nick Robinson at the launch of the new supercar, Autocar reports that there's an effort underway to develop an NSX Type R. Following a much-loved formula, the more extreme variant would pack even more power than the existing version, unburdened by excess weight. A big part of the targeted weight savings would come from ditching some of the heavier components from the hybrid system. The electric motor at the rear could stay to serve as alternator, starter motor, and flywheel. But the electric motors at the front would go, helping to shed a few hundred pounds. Throw in some lightweight materials and we'd be looking at a considerable weight reduction. It could even integrate some active aerodynamic elements that were excluded from the NSX on the road to production. Though the project may still be a ways off from getting the green light, but Robinson and some of his colleagues are working on prototypes ostensibly to make the case. He and his brother James (a powertrain engineer at Honda) will be driving a pair of NSXs at Pikes Peak this year – one that's as close to showroom stock as the regulations will allow, but the other will be closer to what they have in mind for a Type R. It'll ditch the hybrid system and put an electric compressor in its place to eliminate any turbo lag and produce even more power than the existing model. Now if they can only get the go-ahead from the higher-ups at Honda. Related Video: Featured Gallery 2014 Honda NSX Concept-GT News Source: Autocar Green Acura Honda Coupe Hybrid Performance Supercars honda nsx acura nsx type r

Ford F-150, Chevy Silverado, Toyota Tundra flunk IIHS headlight test

The Insurance Institute for Highway Safety put pickup truck headlights to the test and found that the majority of them were equipped with subpar units. The 2017 Honda Ridgeline was the only truck to earn a rating of "good." The large pickup truck test was comprised of the: 2016 to 2017 GMC Sierra, 2017 Nissan Titan, 2016 Ram 1500, 2016 to 2017 Chevrolet Silverado, 2016 to 2017 Ford F-150, and 2016 to 2017 Toyota Tundra. The Sierra's headlights earned a rating of "acceptable," the headlights found on the Titan and Ram 1500 were found to be "marginal," and the ones on the Silverado, F-150, and Tundra were rated as "poor." IIHS claims the F-150 was the most disappointing out of the large pickup trucks as both its halogen and optional LED headlights failed to provide adequate visibility during testing. The Ridgeline (which earned a "good rating"), is usually considered a midsize or small truck, though IIHS included it in the field of large pickups. The headlights on the 2016 Chevrolet Colorado, 2016 GMC Canyon, 2016 Nissan Frontier, and 2016 to 2017 Toyota Tacoma, which made up the small pickup truck group, all earned a rating of "poor." The IIHS claimed the Colorado had the worst headlights of any truck that was tested, as the base vehicle's units were only able to illuminate up to 123 feet in front of the car. The Ridgeline's headlights, for reference, were able to illuminate up to 358 feet in front of the vehicle. To conduct its test, the IIHS utilizes a special tool to measure how far light is projected out of the headlights in different driving situations. The trucks' headlights were tested in a straight line and in corners, while vehicles with high-beam assist were given extra praise. The headlights on the pickup trucks also mimic the testing that was done on small SUVs and cars earlier this year. Next year, automakers will need to fit their vehicles with headlights that earn a rating of either good or acceptable to earn the IIHS Top Safety Pick+. Related Video:

Fire up your 3D printer! Honda releases data for several of its past concepts [w/video]

Futurists have been treating 3D printing like it is the second coming of the Industrial Revolution for years. Everyone will have a 3D printer in their garage and be able make practically anything at home before you know it, right? Well... not quite.
While we can imagine a piece of trim breaking on our car and being able to download the file to print a new one at home, the reality is that 3D printing is still in its earliest stages as a consumer device. Still, Honda is capitalizing on the technology by allowing people to make models of its concept cars at home.
The Honda 3D Design Archive currently consists of five models based on the Fuya-Jo, FSR, Kiwami, Puyo, and NSX concepts. The printer files can be downloaded from the web and carry Creative Commons 4.0 licenses, which allow them to be freely shared. Honda promises that more files will be added to the archive soon.