1999 Honda Accord Lx Sedan 4-door 2.3l on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Honda recalling 183k cars and crossovers over unintended braking issue

A recall has been issued for nearly 183,000 Honda and Acura brand vehicles from the 2005 and 2006 model years. The problem stems from a potential malfunctions to the vehicles' stability control and braking systems.
Drivers have reported a malfunction to Honda's Vehicle Stability Assist system, though to date, no crashes or injuries have been reported as a result of it. Some of the vehicles' Vehicle Stability Assist (VSA) control units may have an electric capacitor that was damaged during manufacture. A damaged control unit could cause the VSA system to apply brake force for a "fraction of a second" without any driver input, or could add additional brake force if it malfunctions while the driver is already braking. Either example could increase the risk of a crash.
To fix the issue, Honda will install a new electrical sub-harness, free of charge to the owner. The recall specifies 101,000 Honda Pilot (pictured), 60,000 Acura MDX and 21,000 Acura RL vehicles from the 2005 model year will be affected. An additional 800 MDX crossovers from the 2006 model year are also included in the recall. In addition, 51,000 of the affected 2005 Pilots will be inspected to be sure that a ground bolt for the VSA system is properly tight. Should this bolt come lose, similar unexpected brake activation may occur.

2016 Honda Civic revealed in patent drawings

Thanks to the sleuths at CivicX.com, we've now got our first glimpse at the production 2016 Honda Civic. The forum found these patent drawings from Honda, showing the next-generation Civic in both coupe and sedan body styles, and we're happy to report that the car seen here is very, very close to the concept we saw in New York earlier this month. Shortly after Honda debuted the Civic Coupe concept at the New York Auto Show, we spoke to the car's lead designer, Guy Melville-Brown, about how this bold two-door would transform into a production model. He told us the Civic should be "a halo product for Honda," and that the concept showed "elements of what we can expect from the production car." The showcar is "what a true Honda Civic should be," Melville-Brown said. Now that we see these patent drawings, a lot of that makes sense. Sure, it's all been toned down for production spec (as expected), but a lot of the bolder design cues are still present. We like the angular shape of the headlamps and front fascia, and we're glad the wraparound taillamps were left alone (on the coupe, anyway – the sedan uses a slightly different design). See all of the patent drawings in the slideshow above, and scroll down for photos and video of the showcar from New York. CivicX.com has more information, including side-by-side comparisons between the patent pictures and the bright green concept. Related Video: