1984 Honda Accord Base Sedan 4-door 1.8l on 2040-cars

Auto blog

Honda recalling small number of Accord, CR-V models

This latest recall may not be a very big one, but it does strike us as an important one. Issued by Honda, the recall affects the 2014-15 Accord (specifically those equipped with the four-cylinder engine) and the 2015 CR-V, but only 137 of them. Those 137 vehicles, however, will need to have their short blocks replaced. What is a short block, you ask? Nope, it's not a chopped-down version of a big block: it's the engine block itself plus all its internal components, but short of any appendages that make it run. (That'd be a long block.) The problem, according to the manufacturer's statement below, stems from bolts – specifically the connecting rod bolt – that may have been improperly torqued during assembly. There's a system that's supposed to check that, but Honda reports that it "may not have identified improperly torqued bolts in a specific group of engines." Hence the recall. Owners of those few vehicles affected can expect to hear from the manufacturer to arrange bringing their vehicle into their local dealership to have the engine replaced, free of charge. Statement by American Honda Regarding Connecting Rod Bolt Recall: 2014-2015 Honda Accord 4-cylinder; 2015 Honda CR-V Mar 9, 2015 - TORRANCE, Calif. - 137 model-year 2014-15 Accord 4-cylinder and 2015 CR-V vehicles affected in the U.S. - Engine short block will be replaced in affected vehicles, free of charge - No related crashes or injuries have been reported Honda will voluntarily recall 137 model-year 2014-2015 Accord 4-cylinder and 2015 CR-V vehicles in the United States to replace the engine short block, free of charge. During engine assembly, an automated system that verifies engine connecting rod bolt torque may not have identified improperly torqued bolts in a specific group of engines. An improperly torqued connecting rod bolt could come loose, leading to potential engine damage and stalling, which could contribute to a crash. No crashes or injuries have been reported related to this issue, which was discovered through a warranty claim review process. Honda is announcing this recall to encourage all owners of affected vehicles to take them to an authorized dealer as soon as they receive notification of this recall from Honda. Mailed notification to customers will begin in late-March. In addition, owners of these vehicles can determine if their vehicles require repair by going to www.recalls.honda.com or by calling (800) 999-1009, and selecting option 4.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

Honda Project 2&4 is our kind of sidecar sideshow [w/video]

Honda makes cars and Honda makes bikes. It makes a whole lot of other things, too, but those are the two areas of expertise that have given rise to the thoroughly enticing Project 2&4 concept. It's one of the smallest vehicles unveiled here at the 2015 Frankfurt Motor Show, but also among the most enticing. The result of a global in-house design competition, Project 2&4 was envisioned by the company's motorcycle studio in Asaka and brought to fruition with help from the automotive studio in Wako. It's powered by the 1.0-liter V4 engine Honda developed for MotoGP competition, driving 212 horsepower and 87 pound-feet of torque through a six-speed, dual-clutch transmission. With less than 900 pounds to motivate, that adds up to blistering performance of the kind we'd give most anything to experience firsthand. The 14,000-rpm redline would be enough to make our heart sing all on its own, but the novelty of Project 2&4 is its design. As you can see, it hands the driver's seat and controls off the side, with room for a hold-on-for-dear-life passenger seat on the other side. The neo-retro styling is inspired by the company's RA272 grand prix racer from the Sixties, but gives up on the center driving position for an altogether more original configuration. The result looks ready to take on the likes of the Ariel Atom and BAC Mono... to say nothing of the curbs of Suzuka and Fuji. If only Honda were (able) to put it into production.