2012 Honda Accord Lx on 2040-cars

Auto blog

Honda recalls Accord to replace airbag control unit

The Basics: Honda will recall 341,444 examples of the 2008-2010 Accord sedan in the US. The Problem: Moisture can enter the supplemental restraint system electronic control unit and cause corrosion. Over time, this could cause the part to fail, which might prevent the airbags from deploying in a crash. Injuries/Deaths: Honda confirms two injuries from this problem. The Fix: Dealers will replace the supplemental restraint system electronic control unit. If You Own One: Honda won't begin the recall until fall 2016 because of the large number of vehicles that will need the repair. The company will inform owners about the problem by mail in mid-March and will notify them again when the parts are available. However, if owners see the supplemental restraint system warning light illuminate before the recall begins, they can visit a dealer for a diagnostic check. If technicians find the problem, then they can replace electronic control unit immediately from Honda's limited supply of replacement parts. Related Video: Statement by American Honda Regarding SRS Electronic Control Unit Recall: 2008-2010 Honda Accord Sedan Feb 3, 2016 - TORRANCE, Calif. Approximately 341,000 Accord Sedans affected in the United States The SRS electronic control unit will be replaced, free of charge Two injuries have been confirmed related to this issue American Honda will voluntarily recall approximately 341,000 Honda Accord Sedans from the 2008-2010 model years in the U.S. to replace the Supplemental Restraint System (SRS) electronic control unit. Manufacturing process issues may allow moisture to enter the circuitry within the SRS electronic control unit, which, over time, can cause corrosion and eventual malfunction of the unit. If the SRS control unit fails from this scenario, the SRS indicator will illuminate on the vehicle's dashboard, and, in the event of a vehicle crash, the airbags may not deploy, increasing the risk of injury. Honda has confirmed two injuries related to this issue. A new SRS control unit will be installed in affected vehicles, free of charge. However, due to the large volume of new parts needed to repair affected units, the necessary parts will not be available until fall 2016. As a result, owners of affected vehicles will be informed of the recall in an initial mailed notification letter in mid-March 2016. A second notification letter will be sent to inform owners when parts become available.

Honda previews new BR-V three-row crossover for Indonesia

Honda is planning to roll out a new seven-seat crossover in Indonesia. But before it does, it's giving the public a taste of what's to come with a concept to be unveiled in Tangerang, previewed in the pair of teaser renderings you see here. Dubbed the BR-V prototype (for Bold Runabout Vehicle), the Honda concept calls for a three-row crossover with room for seven passengers – just like the Pilot we get over here. But if the design sketches are anything to go by, it'll look better. We'll reserve final judgement on the styling until the actual thing is unveiled in the metal, though. Full technical specifications are likely still a ways off from being announced. However the Japanese automaker and its Indonesian importer have confirmed that the BR-V will be powered by a 1.5-liter gasoline engine of unspecified output, mated to a choice of two transmission options. We don't know whether one of those might include all-wheel drive or not, but Honda has indicated that it's built high ground clearance into the BR-V – which ought to keep it from being confused with the low-riding Subaru BRZ, to say nothing Honda's other similarly named crossovers like the CR-V or HR-V. That's about all we know for the time being, but the BR-V promises "to address various customer needs" with "a tough and solid exterior design" combined with a "comfortable and spacious cabin." Locals can start anticipating its unveiling at the Gaikindo Indonesian International Auto Show in Tangerang this August, when P.T. Honda Prospect Motor will already open up the order books. Related Video: All-New Honda BR-V Prototype to Make World Premiere at Gaikindo Indonesian International Auto Show JAKARTA, Indonesia 29 June 2015 – P.T. Honda Prospect Motor released the first official sketches of the all-new Honda BR-V Prototype which will make its world premiere at the upcoming Gaikindo Indonesian International Auto Show 2015, scheduled for 20 - 30 August 2015, in Tangerang, Indonesia. The new BR-V was jointly developed for the Asian market by Honda R&D Asia Pacific Co., Ltd., in Thailand, and P.T. Honda R&D Indonesia. This model will be introduced to the Indonesian market as Honda's new generation crossover utility vehicle to address various customer needs. The new BR-V features tough and solid exterior design with high ground clearance, big and stylish alloy wheels and sleek roof rails. The model also offers a comfortable and spacious cabin with seven seats in a 3-row configuration.

Asian automakers still reluctant to use more aluminum

There's a logical progression of technology in the auto industry. We've seen it with things like carbon-ceramic brakes, which use to be the sole domain of six-figure sports cars, where they often cost as much as an entry level Toyota Corolla. Now, you can get them on a BMW M3 (they're still pricey, at $8,150). Who knows, maybe in the next four a five years, they'll be available on something like a muscle car or hot hatchback. Aluminum has had a similar progression, although it's further along, moving from the realm of Audi and Jaguar luxury sedans to Ford's most important product, the F-150. With the stuff set to arrive in such a big way on the market, we should logically expect an all-aluminum Toyota Camry or Honda Accord soon, right? Um, wrong. Reuters has a great report on what's keeping Asian manufacturers away from aluminum, and it demonstrates yet another stark philosophical difference between automakers in the east and those in the west. Of course, there's a pricing argument at play. But it's more than just the cost of aluminum sheet (shown above) versus steel. Manufacturing an aluminum car requires extensive retooling of existing factories, not to mention new relationships with suppliers and other logistical and financial nightmares. Factor that in with what Reuters calls Asian automaker's preference towards "evolutionary upgrades," and the case for an all-aluminum Accord is a difficult one. Instead, manufacturers in the east are focusing on developing even stronger steel as a means of trimming fat, although analysts question how long that practice can continue. Jeff Wang, the automotive sales director for aluminum supplier Novelis, predicts that we'll see a bump in aluminum usage from Japanese and Korean brands in the next two to three years, and that it will be driven by an influx of aluminum-based vehicles from western automakers into China. Only time will tell if he's proven right. News Source: ReutersImage Credit: Sean Gallup / Getty Images Plants/Manufacturing Honda Hyundai Mazda Nissan Toyota Technology aluminum