2009 Honda Accord Ex-l on 2040-cars

Auto blog

Honda recalls 1.4 million vehicles in the U.S.

DETROIT — Honda is recalling over 1.4 million vehicles in the U.S. to repair drive shafts that can break, window switches that can overheat and a software flaw. The software recall includes 737,000 Accords from 2018 to 2020 and Insights from 2019 and 2020. A programming flaw in a control computer can cause the rear camera, turn signals and windshield wipers to malfunction. Owners will be notified in late January about when they should take their vehicles to a dealer for repairs. Two drive shaft recalls cover 430,000 Honda Civic Hybrids from 2012, the 2007 through 2014 Honda Fit, the 2013 through 2015 Acura ILX and the 2013 through 2015 Honda Accord. TheyÂ’re in 22 states where salt is used to clear roads in the winter. The drive shafts can break due to corrosion. Dealers will inspect the left and right drive shafts and replace them if needed. Parts arenÂ’t available yet. Owners will get an initial notification in February and will be told later when to go to a dealer. About 268,000 CR-Vs from 2002 through 2006 are included in the power window switch recall. Water can get into an open driverÂ’s window and cause an electrical short, possibly touching off a fire. ItÂ’s the second recall for the same issue. The cars were recalled starting in October of 2012, but the repairs didnÂ’t work. Honda says it has reports of 16 fires but no injuries. Honda says owners should take the SUVs in for repairs as soon as they get a recall notice. Those will be mailed starting in late January. Owners can also check https://owners.honda.com/service-maintenance/recalls or call (888) 234-2138 to see if their vehicle is affected.

Honda's Acura NSX masterstroke: building the factory in Ohio

When Honda announced it was going to build its NSX supercar in Ohio instead of Japan, it caught everybody in the industry by surprise. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Now Honda has a supercar production facility in rural Ohio that would be the envy of any Formula One team. The people at Honda call it the PMC, but its official name is the Performance Manufacturing Center. It's a building that started out as a shipping facility for suppliers, but Honda invested $70 million to transform it into a showcase facility that will build the NSX. Honda benchmarked the assembly operations at Ferrari, Lamborghini, McLaren, and Bentley before work began on its facility. The 200,000 square-foot building will also double as a customer reception center – Honda will open the doors for customers to come see their car being built. It's also going to offer them high-speed test drives at the gigantic Transportation Research Center just down the road. No one expected this proud Japanese company to build its most technologically advanced sports car anywhere but in its home country. Inside, the layout is wide open and well lit. There are no stripes or lines on the floor and none of the different departments are walled off. This creates a more welcoming appearance and lets you get a comprehensive view of the entire process at a glance. And with an eye towards future lessons learned, most of the equipment is of a modular design that can be easily reconfigured or moved. The body shop and paint shop are enclosed by glass walls so that anyone can see what's going on inside. And while you'll see some automation here and there, the idea was to achieve a blend between man and machine, not to try and automate everything. This is a low-volume facility with production targeted at only eight to ten cars a day. The plant runs four days a week with one ten-hour shift. Don't expect to see rows of new NSXs parked on any dealer's lot. The car will only be built to order. Honda is obsessed with ensuring the NSX is built to the most exacting quality standards. The plant people pored over the JD Power Appeal study to determine what supercar customers care about the most, then looked at which aspects of that directly tie into manufacturing. They developed their quality control strategy with three goals in mind. First, they wanted to build everything right the first time with no adjustments.

Honda S660 set for Yokkaichi production next year

Roadsters, you might argue, are best when they're small and nimble. If you're thinking of the Mazda MX-5 Miata, you're on the right track, but there have been even smaller ones: pint-sized, three-cylinder roadsters like the Daihatsu Copen, Suzuki Cappuccino and Smart Roadster. But the most iconic and enduring of them was surely the Honda Beat.
Designed by Pininfarina, the Beat was - not unlike the F40 was for Enzo Ferrari - the last car approved for production by company founder Soichiro Honda. It complied with Japan's strict Kei car regulations and packed a tiny, naturally aspirated 656 cc that produced just 63 horsepower. The cult classic ended production in 1996, but six months ago Honda hinted at a revival with the presentation of the S660 concept at the 2013 Tokyo Motor Show. Now it seems Honda - or Yachiyo, we should say - is gearing up to put it into production at the same factory that produced the Beat two decades ago.
That plant is the Yokkaichi factory, a facility owned by Yachiyo Industry Co., Ltd. that builds small cars on contract for Honda. It was slated for a major expansion a few years ago until Honda shifted some of its small car production to its own plant in Suzuka, but continues to build the N series of boxy, upright hatchbacks, as well as small commercial vehicles like the Life and Vamos lines. The reintroduction of a small roadster line to the factory's output sometime in 2015 will undoubtedly be a cause for celebration in Yokkaichi. For our part we can only hope that American Honda CEO Tetsuo Iwamura gets his way and manages to bring the S660 to the US in the near future.