Slt Ethanol - Ffv New Suv 5.3l Cd 4x4 Locking/limited Slip Differential Abs A/c on 2040-cars

Auto blog

2024 GMC Canyon AT4X AEV Edition pushes the limits even higher

The GMC Canyon AT4X is already a formidable off-road pickup truck, but now it’s getting even more capable with the addition of the 2024 GMC Canyon AT4X AEV Edition. If youÂ’re familiar with the Chevrolet Colorado ZR2 Bison, then by proxy youÂ’re familiar with GMCÂ’s version of it already. Like the bow-tie version of the pickup, the AT4X AEV Edition is lifted an additional 1.5 inches beyond the regular AT4X, giving it 12.2 inches of ground clearance, which is identical to the ZR2 Bison. You also get to work with a 38.2-degree approach, 26.0-degree departure, and 26.9-degree breakover angle. ItÂ’s fitted with AEV beadlock wheels wrapping 35-inch Goodyear Wrangler Territory mud-terrrain tires and uses hot-stamped boron steel skid plates for the radiator, steering gear, transmission, transfer case, fuel tank and rear differential. Appearance-wise, the AEV Edition sports a new front fascia with integrated fog lights and larger fender flares that facilitate the bigger tires. It uses AEV stamped-steel front and rear bumpers that include heavy-duty recover points, and the front bumper is compatible with a winch. The rear bumper (below) is particularly clever, as it has easily removable plastic corners that can be replaced with 10 millimeter-thick steel skid plates for a little extra protection on the trail. YouÂ’ll find an AEV in-bed mount for the spare tire, too, as the big 35-inch tire doesnÂ’t fit in the usual under-bed storage spot. GMC wasnÂ’t ready to provide hard numbers for payload or towing, but expect the Canyon AT4XÂ’s specs to go down in a similar manner as the ZR2 Bison that lost 230 pounds of payload capacity and 500 pounds of towing. And yes, the AEV Edition retains the AT4XÂ’s high-output four-cylidner that produces 310 horsepower and 430 pound-feet of torque. You get all the other AT4X goodies, too, including things like the Multimatic spool valve shocks and electronic-locking front and rear differentials. It also gets the sweet off-road launch control system that initially debuted on the Bison that can adjust power in real-time based on the traction available off-road. On the inside, the AEV Edition adds three standard auxiliary switches that you can hook up off-road or overlanding accessories to. The truck is also fitted with AEV-embroidered headrests and AEV all-weather floor liners. Pricing for the AT4X AEV Edition isnÂ’t available quite yet, but GMC says itÂ’s expected to be available for customer orders later this year.

Chevy Colorado and GMC Canyon get trim levels reworked again

GM Authority reports that GM has fiddled with trim packages on the Chevrolet Colorado and GMC Canyon for the 2021 model year, eliminating the base trims on both pickups and implementing small price changes. When the new model year goes on sale, the Chevy will lose the rear-wheel drive Base Extended Cab with the automatic transmission that starts at $22,395 after a $1,095 destination charge. The new entry-level is going to be the Work Truck model with the extended cab in rear-wheel drive, starting at $26,595 assuming the destination charge holds steady. That represents a $4,200 jump over the base 2020 model. MSRPs for the entire Work Truck lineup, from base to the Crew Cab Long Box, rise by $400. Elsewhere in the Colorado line, the four Z71 trims go down by $100, while the two ZR2 trims increase by the same amount. Only the six LT trims don't see any change.  The GMC side is a bit more involved due to previously announced changes. The 2020 Canyon comes in SL, Base Canyon, SLE, SLT, All Terrain, and Denali steps. Last month, GM Authority reported the 2021 Canyon would give all that up for the new names Elevation Standard, Elevation, AT4, and Denali. Since the SL base model retires in 2021, the Elevation Standard takes over at the entry level. Unlike on the Colorado, which sheds one trim, the Canyon lineup gets pared from 20 total combinations of trims, cab sizes, and bed lengths, to 14 total combinations. But like the Colorado, due to the loss of the cheapest configuration, the least expensive 2021 Canyon becomes $4,200 more expensive than in 2020, assuming the destination price remains the same. What's more, the 2021 Elevation Standard pricing adds $700 or $800 to the prices of the 2020 Canyon base and SLE models. There are more increases up the range. The 2021 Elevation trim replaces a combination of SLE and SLT models, bumping prices up by up to $900. In 2020, the least expensive All Terrain model is the Extended Cab Cloth for $37,695. For next year, the least expensive AT4 trim is the Crew Cab Short Box for $39,295. Like-for-like, though, the AT4 represents a $300 premium over the 2020 All Terrain Crew Cab Short Box. Three Denali trims will still stand at the top of the heap, each one going up by $400 in 2021. Until GM details the equipment changes, we won't know how the new pricing equates to value.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck