Entertainment - Chrome 22s - Quad Buckets on 2040-cars

Auto blog

GMC Hummer EV heads north for winter

GMC announced early Tuesday that its new Hummer EV pickup is ready to head north for winter testing. What might seem like a trip in the wrong direction to us warm-blooded enthusiasts is a critical next step in the development of GM's new electric truck.  We also got a couple of teaser pics of the Hummer EV at GM's Milford Proving Grounds, along with two shots of development prototypes being assembled, of which GM says it has "a series." There's not much new to see here, but GM says there's more to come. "The GMC HUMMER EV has arrived at GM’s Milford Proving Grounds to continue validation tests and will head to northern Michigan to run through the teamÂ’s grueling winter testing process," GM said in its announcement. "We will document the journey and share updates in the coming weeks and months." The GMC HUMMER EV arrived at GM?s Milford Proving Grounds to c View 3 Photos The GMC Hummer EV Edition 1 will feature three electric motors, enabling torque vectoring. GMC says these motors produce 1,000 horsepower, though we don't yet have a final torque figure. Power comes from a 24-module Ultium battery pack which can provide an estimated 350 miles (or more) of range. GMC says this new architecture supports 800-volt fast charging up to 350 kW, which is comparable to the system Porsche introduced with its Taycan electric sedan, and GMC says it can replenish 100 miles of range in just 10 minutes. Planned variants include a two-motor setup, and an alternative three-motor version without torque vectoring. The Hummer EV rides on fully independent suspension with adaptive air shocks. They can provide continuous damping adjustments for comfort, and have a height adjustment range of 6 inches. When set in its max-height off-road mode, it has two additional inches of ground clearance, and the "Extract Mode" will lift it six inches higher than default. The Edition 1 model also comes with standard 35-inch mud terrain tires, and combined with the suspension, the Hummer EV has a fording depth of two feet and the capability to climb over an 18-inch vertical obstacle. Edition 1 Production begins late next year, with a starting price of $112,595. In fall 2022, we'll see the regular top trim starting at $99,995; In spring 2023, weÂ’ll get a mid-level trim that has three motors, air suspension and four-wheel steering -- but no torque vectoring -- starting at $89,995. 

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

2019 GMC Sierra 1500 prototype shows off differences from Silverado

Now that the new Silverado has made its debut, we're awaiting the reveal of its mildly restyled twin, the GMC Sierra 1500. While it likely won't be that different as far as capability and major equipment are concerned, we are looking forward to seeing what design changes it will have. Based on these recent spy shots, the changes will be mild, but still enough to make it visually distinctive. One of the more obvious differences will be in the front fascia treatment. Unlike the Silverado's grille that's level with the top of the headlights, the GMC's will rise above the lights, which will also yield a slight drop on each side of the hood to meet the lights. The grille is quite tall, extending far below the headlights, too. We can make out, behind some mesh, two dips on the outer edges of the grille that give the Sierra a more menacing frown. Large foglights are also found right near where the scoops for the wheel air curtains, and the headlights are unified on the edges, rather than split on the Silverado. Along the sides, the sheet metal looks relatively unchanged. At some angles, we can make out the distinctive shoulder line from the Silverado that runs up to about the rear mirrors where it stops to make room for another crease that rises up from somewhere in the middle of the front doors to lead to the front. The wheel arches are decidedly different from the Silverado's though. While the Silverado has fairly rounded arches, the Sierra's have a rear-slanted bevel to the fronts of the arches and a rounded 90-degree corner at the rears. There isn't much we can tell about the rear except for the taillights. They're quite large, and unlike the Silverado's, there aren't any areas where the sheet metal intrudes. It also appears that the tops of the taillights extend farther forward into the bed sides than the Chevy's. Because the Sierra has almost always been a mechanical twin of the Silverado, we expect it to offer the same 5.3-liter and 6.2-liter V8s, as well as the new 3.0-liter diesel inline-6. Also, being a GMC, it will likely have a flashy, chrome-laden Denali trim level. We also will see the fully revealed model soon, as Automotive News reports the debut will be on March 1. Related Video: Featured Gallery 2019 GMC Sierra 1500 spy shots View 39 Photos News Source: Automotive News Spy Photos GMC Truck chevrolet silverado