Entertainment - Chrome 22s - Quad Buckets on 2040-cars

Auto blog

GMC Terrain's first generation could get recalled for headlights

According to Car Sales Base, GMC sold 745,454 Terrain crossovers from the end of 2009 to the end of 2017, all but a few of them representing the first-generation model years of 2010 to 2017. According to the National Highway Traffic Safety Administration, the carmaker will need to recall almost all, due to a problem with excessively bright headlight reflections. NHTSA takes issue with the fact that federal motor vehicle regulations stipulate how bright headlight reflections are allowed to be within a certain arc of the headlight beam axis. In a certain area of the arc, the Terrain throws two small spots of light that are about 450 to 470 candela strong where the legal maximum at that point is 125 candela — one candela being equivalent to the light from one candle. The NHTSA wants the headlights replaced for being close to four times over this reflective limit, alleging this can cause "glare to other motorists driving in proximity." GM discovered the noncompliance in 2019, then filed a notice of noncompliance that requested an exemption from having to recall the crossover. GM's counterpoint to NHTSA was that the two areas of illegality were 80 degrees outboard of the headlight and 45 degrees up. You'd have to be Slenderman or a giraffe standing on the side of the road — our words, not GM's — to be blinded by the light. The automaker hadn't heard of any incidents nor complaints over the issue. The only customer feedback GM received was a Terrain driver saying the "left headlamp seems to have a portion of the light that shines up in the trees at near a 45-degree angle." Note, that's the left headlight, so the tree in question would likely be on the other side of the road. GM said oncoming traffic wasn't impaired by the excessive brightness. Due to these these mitigating factors, GM asked for an exemption from recalling the Terrains.    This week, NHTSA denied GM's petition.

2015 Chevy Silverado, GMC Sierra heavy duty trucks unveiled

Proving just how important trucks are in the Lone Star State, General Motors has chosen the State Fair of Texas to reveal its new heavy-duty trucks from Chevrolet and GMC. Looking to take some of the wind out of the sails of the 2014 Ram HD and 2015 Ford F-Series Super Duty, the 2015 Chevy Silverado HD and 2015 GMC Sierra HD will have plenty to brag about when they go on sale in the first quarter of next year.
The bragging starts right up front with two available engines. The standard engine is a Vortec 6.0-liter V8 that produces 360 horsepower in the 2500HD and 322 hp in the 3500HD to go along with 380 pound-feet of torque in all applications. The true benefit of this powerplant is that buyers can opt for it to run on straight gasoline, E85 FlexFuel or even compressed natural gas (CNG). For maximum towing and even more flexibility, the 6.6-liter Duramax turbodiesel B20-capable V8 is the way to go, with its carryover 397 hp and 765 lb-ft of torque. Though the max towing abilities of 23,200 pounds (with a fifth-wheel trailer) are less than the 30,000-pound rating of the new Ram, the GM HD trucks offer better conventional trailer towing (19,600 pounds) and payload (7,374 pounds) than rival heavy-duty trucks...for now. The Duramax is paired with a six-speed Allison automatic transmission, while the gas engine gets GM's six-speed Hydra-Matic - no manual transmissions are offered.
Including the engines, GM continues to offer a broad range of configurations (more than 150, to be exact) including three cabs, two cargo bed lengths, numerous trim levels and, of course, the choice of single- or dual-rear wheels on the 3500. The HD trucks have faces that are similar to their half-ton counterparts, with the exception of a larger grille and bigger for improved air flow, and like the current HD offerings, the new Silverado HD and Sierra HD DRW models feature a one-piece bed design incorporating the fender extensions.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck