Dnli Suv 6.2l Cd Awd Tow Hooks Locking/limited Slip Differential Air Suspension on 2040-cars

Auto blog

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.

GM might lose 90-year U.S. sales crown over chip shortage

Automotive News editor Nick Bunkley tweeted on October 1 that according to AutoNews data, General Motors "has been the largest seller of vehicles in the U.S. every year since passing Ford in 1931." With automakers having turned in light car and truck sales data for the first three quarters of 2021, GM's 90-year-run might not reach 91. According to AN figures, Toyota was 80,401 vehicles ahead when the October workday started. Worse, GM is so far behind its historic pace that it might only sell enough light vehicles in the U.S. to match its numbers from 1958.  Meanwhile, the New York Times put a few more salient numbers to the pain GM and Toyota are enduring alongside the the rest of the industry. GM sold 33% fewer cars in Q3 2021 than it did in Q3 2019 during the dark days of the pandemic, 446,997 units this year as opposed to 665,192 last year. GM's Q3 2020 was only down 13% on Q3 2019. Over at Toyota, the bottom line showed a 1% gain in Q3 2021 compared to 2020, with 566,005 units moved off dealer lots. The finer numbers show two steps forward and one step back, though; Toyota's September sales were down 22% compared to last year.  GM remains optimistic about what's ahead, GM's president of North American operations telling the NYT, "We look forward to a more stable operating environment through the fall." We'd like to see that happen, but we don't know how it happens. The chip shortage said to have been the inciting incident for the current woes isn't over, and not only can no one agree when it will be over, the automakers, chip producers, and U.S. government still can't get on the same page about who needs what and when. Looking away from that for a second shows articles about "No End In Sight" for supply chain disruptions in early September, before China had to start working through power supply constraints, global supply chain workers started warning of a "system collapse," and roughly 500,000 containers sat waiting to be unloaded at Southern California ports — a record number seemingly broken every week. And back to chips, we're told just a few days ago the chip shortage is "worse than we thought."   For now, the NYT wrote that GM dealer inventory is down 40% from June to roughly 129,000 vehicles, and down 84% from the days when dealers would cumulatively keep about 800,000 light vehicles in stock. However, GM just announced it would have almost all of its U.S. facilities back online next week, although some would run at partial capacity.

GMC teases rugged 2021 Canyon AT4 pickup

GMC promised every model in its lineup would get the AT4 treatment by 2021. Having introduced AT4 versions of the Sierra, Acadia and Sierra HD already, that leaves the Canyon, Terrain and Yukon waiting their turn for the procedure. During a press even for the Sierra HD in Jackson Hole, Wyoming, GMC teased Canyon AT4 as next in line to receive upgraded off-road chops. The automaker had a camo'ed prototype Canyon AT4 in a trailer hooked up to a Sierra HD. When Sierra occupants pulled up the feed from the trailer-mounted camera on the infotainment screen, said occupants got a view of the masked midsize pickup between two walls reading, "The first ever Canyon AT4" and "Coming early 2020." The main mysteries are how extensive the pickup's AT4 transformation will be, and when it will go on sale. The AT4 kit changes depending on model. The Sierra AT4 upgraded performance and looks, with features like a two-speed transfer case, locking rear differential, a two-inch lift and Rancho monotube shock absorbers, skid plating, black-chrome grille and body-colored grill surround. The 2020 Acadia AT4 is mostly about looks, pairing standard all-wheel drive with black trim and wheels, and all-terrain tires. The Canyon's expected to weigh in on the Sierra end of the overhaul, and slide into the lineup between the SLT and top-tier Denali trims. The mods will put it beyond the current All Terrain trim being phased out across the lineup, but leave space between the Canyon AT4 and its Chevrolet sibling, the Colorado ZR2. GMC VP Duncan Aldred said, "They’re going to have different capability levels. The ZR2 is extreme capability. AT4 isnÂ’t positioned as extremeÂ… not intended to rival the ZR2." And the Colorado gets the even chunkier Bison version on top of that. The Canyon AT4 is predicted to join the lineup for the 2021 model year, so although it's "coming early 2020," it might not go on sale until much later in the year. GM's midsized pickup twins will be endowed with changes so mild that neither brand will classify the work with the term "midcycle enhancement." Figure a refining around the grille and lights and a few minor fillips otherwise. Next-generation models of the Canyon and Colorado aren't due until 2023, and there's apparently debate inside GM about an interior refresh for both trucks before then. The Terrain should mirror changes to the Acadia, and it would be a pleasant surprise to see the all-new Yukon also due in early 2020 get serious off-road teeth.