2023 Gmc Yukon Denali on 2040-cars

Auto blog

5 classic trucks and their polarizing modern revivals

EVs are helping eliminate Detroit's gas-guzzling problem. Some revivals of gas-powered classics are getting the EV treatment.  But not every revived model looks exactly like its original counterpart. We're in a new era of hulking Detroit metal, and you can thank EVs. Americans can't get enough of their big, beefy trucks and SUVs. But for many years, some of the biggest gas guzzlers fell out of fashion as gas prices rose and emissions regulations tightened. But in the past few years, some of the most iconic American truck nameplates have been brought back to life with electric motors, like the GMC Hummer. In other cases, as with the Ford Bronco, improvements in engine technology and more interest in rugged adventure vehicles made a gas-powered revival possible. Even some revivals that started as gas-powered, like the Chevy Blazer and the Jeep Wagoneer, are now getting electrified spinoffs. (Even if they don't always look quite as sleek as their original inspiration.) Here are side-by-sides of five classic American trucks and their modern counterparts. The Jeep Wagoneer 1975 Jeep Wagoneer and 2024 Electric Jeep Wagoneer SStellantis After a long wait, Jeep released its revival of the classic Wagoneer and Grand Wagoneer in 2020. Starting later this year, an electric version of the luxury Jeep SUV will join the Wagoneer lineup. The Chevrolet Blazer A 1973 Chevrolet Blazer and a 2024 Chevrolet Blazer EVGetty Images, General Motors The Chevrolet Blazer was first rebooted in 2019 as a sporty family SUV. The modern Blazer shares zero resemblance to its boxy, off-roading older sibling, but it has still managed to become one of Chevy's more popular SUVs in recent years. The Blazer EV came later, and was one of the first models GM built on its new Ultium battery platform. The Hummer A Hummer H2 and the 2023 Hummer EV pickup truckGetty Images, General Motors Once the poster child for Detroit's big, bad gas guzzlers, the Hummer got new life as an electric pickup truck in 2021. The Ford Bronco A 1971 Ford Bronco and a 2022 Ford BroncoFord Motor Co. After a rouge group of engineers and designers inside Ford spent years trying to breathe life back into the Blue Oval's boxy off-roader, the Ford Bronco was finally resurrected in 2020 amid a rise in popularity for rugged adventure vehicles. The Ford Ranger 1985 Ford Ranger and a 2024 Ford RangerFord Motor Co.

GM opens official investigation into C8 Corvette transmission leaks

In March 2020, a month after Chevrolet began customer deliveries of the 2020 C8 Corvette, a GM dealer technician created a Reddit thread about a leaking gearbox in a Corvette with 32 miles. That car hadn't even been sold yet. Since then, as a search of "C8 Corvette transmission leak" shows, it's been tales of woe for some owners. Something in the Tremec TR-9080 transaxle in the back of the mid-engined Corvette doesn't work as it should, the fault able to cause codes that the transmission needs service, or that the driver needs to shift to park. In some cases, the battery would die because of follow-on issues after the initial transmission code, that code preventing the car from powering down. As Autoevolution reports, GM filed paperwork with the National Highway Traffic Safety Administration in August to look into what's going on. Between forum threads and GM's investigation document, there are several issues mentioned. The most common appears to be the dual-clutch transmission leaking fluid due to gasket failures like the one suffered by one owner at 858 miles, and another for an owner currently enduring a second leaking transmission. The Midengined Corvette Forum reported that Chevy engineers redesigned the TR-9080 pan, fitting Corvettes with the new unit at some point in the 2021 model year. The original pan was stamped steel unit affixed to the engine with two studs and 13 bolts, plus "reinforcement plates." The updated pan is said to be a cast aluminum unit affixed with two studs and 17 bolts, omits the reinforcement plates, and gets a new machined new groove around its edge to seat the gasket seal. The GM paperwork now at the NHTSA mentions a P1789 code, and says one reason for it could be "debris on the park position sensor magnet causing an incorrect position reading to the TCM." This might be caused by another issue mentioned in forums, which is clogged transmission filters. GM gives instructions for returning transmission filters to the company, and a poster on one forum said the Corvette tech at the dealer where he bought his Corvette told him the automaker "requires every used transmission filter to be returned to GM."  Whatever's going on, the problems haven't stopped, and they go beyond the P1789 code. Over the weekend, a 2022 Corvette owner posted on Corvette Forums that he got a check engine light on his car after just 850 miles.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.