2009 Gmc Yukon 4x4 Navigation Leather Backup Camera Heated Seats on 2040-cars

Auto blog

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Will GMC enter the subcompact crossover segment after all?

GMC last year categorically ruled out launching a subcompact crossover positioned below the Terrain, but the decade-old rumor refuses to die. The on-again, off-again model is back on track for production, according to a recent report. Citing anonymous sources, enthusiast website GM Authority claims the soft-roader is closer than ever to receiving the proverbial green light for production. It hasn't been approved yet, so development work hasn't started. What it will look like if it receives a thumbs-up from executives is up in the air, but GMC can take several paths into this lucrative (and increasingly popular) segment of America's new-car market. Chevrolet has two fighters in the ring: the Trailblazer and the Trax. GMC could feasibly choose one, put it in a brand-specific wrapper, and call it a day. It could also design its entry from scratch, though this option would take longer and cost significantly more. Either way, the model will allegedly be called Granite or Graphyte, and it will be positioned below the Terrain in terms of size and price, meaning it would likely start above $20,000. In 2019, GMC explained it ruled out expanding its range towards the bottom to position itself as a premium brand. It wanted to focus on high-profit models, like the Sierra and the Canyon, but the crossover's ever-increasing popularity may have proven too alluring to resist. Besides, small and premium aren't mutually exclusive, and downsizing would help the brand increase its annual sales. If you're experiencing deja vu, it's likely because we've heard murmurs about a city-friendly GMC since the Granite concept (pictured) made its debut during the 2010 edition of the Detroit Auto Show. It was approved for production that year, approved again in 2011 (tentatively on a Cruze platform), and abruptly canceled in 2012. GMC hasn't commented on the report, so we'll need to be patient to find out if it's accurate — and how it would differentiate its entry-level crossover from Buick's. In the meantime, the company is putting the final touches on the electric Hummer, which will be offered as a pickup and as an SUV, and it's about to unveil the 2022 Sierra. Featured Gallery GMC Granite Concept Rumormill GMC Crossover

GM CEO Mary Barra predicts mass electrification will take decades

General Motors is allocating a substantial amount of money to the development of electric technology, but Mary Barra, the firm's CEO, conceded that battery-powered cars won't fully replace their gasoline-burning counterparts for several decades. She stressed the shift is ongoing, but she hinted it will be slower than many assume. "We believe the transition will happen over time," affirmed Barra on "Leadership Live with David Rubenstein," a talk show aired by Bloomberg Television. She added that not every car will be electric in 2040. "It will happen in a little bit longer period, but it will happen," she told the host. She was presumably talking about the United States market; the situation is markedly different in Europe and in China, where strict government regulations (and even stricter ones on the horizon) are accelerating the shift towards electric cars. On the surface, it doesn't look like General Motors has much invested in electrification; the only battery-powered model it sells in America in 2020 is the Chevrolet Bolt (pictured), which undeniably remains a niche vehicle. Sales totaled 16,418 units in 2019, meaning the Corvette beat it by about 1,500 sales. In comparison, Cadillac sold 35,424 examples of the aging last-generation Escalade during the same time period. And yet, the company isn't giving up. It has numerous electric models in the pipeline including a slightly larger version of the aforementioned Bolt, the much-hyped GMC Hummer pickup, and an electric crossover assigned to the Cadillac brand. These models (and others) will use the Ultium battery technology that General Motors is currently developing. Its engineers are also working on a modular platform capable of underpinning a wide variety of cars. Bringing these innovations to the market is a Herculean task. EVs may not take over for decades, but Barra and her team must believe their 2% market share will increase significantly in the coming years if they're approving these programs. Autonomous technology is even costlier, more complicated, and more time-consuming to develop. Barra nonetheless expects to see the first General Motors-built driverless vehicles on the road by 2025. "I definitely think it will happen within the next five years. Our Cruise team is continuing to develop technology so it's safer than a human driver. I think you'll see it clearly within five years," she said on the same talk show. Her statement is vague but realistic.