2005 Gmc Yukon Sle Sport Utility 4-door 4.8l on 2040-cars

Auto blog

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.

2020 GMC Sierra 1500 Interior Driveway Test | Still lagging behind

GM has caught nothing but grief for the interiors of its full-size pickups since they were redesigned. Some of it is about perspective. Ram blew everybody away with the new 1500’s interior, but it's not like the Ford F-150 is embarrassed by it. Chevy and GMC are. Even a top-shelf Sierra Denali doesnÂ’t live up to the luxurious environment its price tag would promise.  The trim of Sierra we're testing is an AT4, though. ThatÂ’s the light off-roading version of the Sierra thatÂ’s mechanically the same as the Silverado Trail Boss we recently reviewed. Looking at the interior from a pure functionality standpoint, the Sierra is perfectly fine at performing its truck duties. The seats are wide, flat and comfortable. It has huge armrests on both sides so you can stretch out as much as your truck stretches the boundaries of the road (seriously, this thing is huge). All the buttons in the center stack are well-labeled, easily found and big enough to stab away at without hitting the wrong one. It even has a volume and tuning knob. Yeehaw!  But look at the design. And the styling, or lack thereof. ItÂ’s plain and lacking in imagination. The whole center stack is just one big slab of black plastic, and the only splashes of color or style to distinguish it visually are bits of silver surrounding knobs and bits of gray surrounding air vents. That's certainly not enough to make it attractive. There are token pieces of "wood" inserted on Denali models, but they're almost hidden away along the center console and doors.  The screen looks as if itÂ’s scrunched into the top of the stack due to the vents curving in on both sides, making it look smaller than its perfectly acceptable 8-inch size. That just makes it more obvious that GM doesn't offer something to challenge the gigantic 12-inch optional screen on the Ram 1500. Not good, because size does matter when it comes to trucks, even if it's measured in a touchscreen's inches rather than engine displacement. LetÂ’s not discount how good all of the tech is in the Sierra 1500, though. GMÂ’s infotainment software that runs on the screen is glitch-free and runs like lightning through screens and menus. The performance is impressive, and of course both Apple CarPlay and Android Auto are on board.

NHTSA investigating nearly 750,000 GM models over non-deploying airbags

Nearly 750,000 vehicles built by Chevrolet, GMC, and Cadillac are the subject of a National Highway Traffic Safety Administration (NHTSA) investigation due to non-deploying driver-side airbags. While the investigation is ongoing, the agency believes the issue is likely due to rust particles that form on the inflator's connection terminal interface. The list of nameplates included in the investigation includes Chevrolet's Silverado, Tahoe, and Suburban, GMC's Sierra, Yukon, and Yukon XL, plus Cadillac's Escalade, Escalade ESV, CT4, CT5, and XT4. All of the potentially affected vehicles are 2020 or 2021 models, according to a bulletin published on the NHTSA's website. Investigators launched the probe in April 2021 after 15 consumers reported airbag-related issues, including nine who said an airbag malfunction light appeared in the instrument cluster. More alarmingly, the NHTSA is aware of six accidents that caused significant damage to the car's front end yet didn't trigger the driver's airbag. It adds that there are no fatalities linked to the issue, but there are six crashes and eight injuries reportedly blamed on it. No evidence suggests this problem is related to the millions of potentially deadly Takata inflators recalled over the past few years. General Motors is aware of the defect. It sent a technical service bulletin (TSB) to its dealers in March 2021 to address the aforementioned warning light. The note explains the issue is due to "rust particles in the connection terminal interface of the driver's airbag inflator." The company hasn't issued a safety recall yet, however. Whether it will partially depends on the NHTSA's findings. It's currently looking into the scope and the severity of the problem, and it wants to understand its implications on driver safety. Investigators will decide whether General Motors needs to recall the 749,312 cars that are part of the probe when they close their investigation. General Motors has already spent a significant amount of money replacing defective airbag-related parts in its cars. In November 2020, it was ordered by the American government to recall nearly 6 million pickup trucks and SUVs equipped with potentially dangerous Takata airbag inflators. It repeatedly argued that testing proved the inflators were safe, and it petitioned the agency four times starting in 2016 to avoid a recall, which cost an estimated $1.2 billion (about a third of its net income in 2020).