2004 Gmc Yukon Denali Sport Utility 4-door 6.0l on 2040-cars

Auto blog

2015 Chevy Tahoe, Suburban and GMC Yukon unveiled

General Motors has today unveiled its new family of fullsize SUVs, including the 2015 Chevy Tahoe, its longer Suburban sibling, and their GMC Yukon, Yukon XL and Yukon Denali cousins. More efficient powertrains, improved aerodynamics, increased connectivity and better overall refinement are what Chevy and GMC say will separate their new SUVs from the current generation.
Sporting a tried-and-true body-on-frame architecture, these full-size SUVs feature platforms that are stronger and offer a wider rear track for "a more planted stance," according to Chevy and GMC. Mounted at the front of each SUV is an EcoTec3 powertrain, which consists of a standard 355-horsepower, 5.3-liter V8 (or a 420-hp, 6.2-liter V8 for the GMC Yukon Denali alone) with direct injection, cylinder deactivation and continuously variable valve timing, that's paired with a Hydra-Matic 6L80 six-speed automatic transmission. The setup is said to be more efficient than before, though official EPA fuel economies for each vehicle are not yet available. To help the powertrain achieve the best possible fuel economy in these 5,000+ pound SUVs, the new styling was developed with aerodynamics in mind. For the same reason, electric power steering also makes its debut in the Tahoe/Suburban/Yukon family.
The front fascias of the Chevy Suburban/Tahoe and GMC Yukon are distinct, but from the base of the A-pillars back, they share most of the same styling cues. This now includes inlaid doors that tuck into the door sills, instead of over them, which improves aerodynamics and fuel economy, and lessens interior noise. The hoods and liftgate panels now are made of aluminum in an effort to reduce vehicle weight. Chevy and GMC also tout that the Tahoe/Suburban and Yukon don't share a single piece of sheetmetal or lighting element with the brands' full-size pick-up trucks.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Coronavirus shakes up America's truck market: GM outselling Ford and Ram

FCA, Ford and General Motors joined the rest of the U.S. auto industry in taking heavy volume hits due to coronavirus-related shortages of both cars and customers. The saying goes that a rising tide lifts all boats; it stands to reason, then, that a falling one would have the opposite effect.  However, as we learned Thursday, the automotive market can behave in unpredictable ways. While the F-Series remained the best-selling nameplate in Q1, GM's full-size trucks are now outselling Ford's again for the first time in years, and with this upward thrust from the General, FCA's Ram was unceremoniously booted out of a hard-earned second place.  While late-March sales declines hit just about every major automaker in one way or another, the model-by-model results weren't nearly so uniform. And because the market tends to be a zero-sum game, for every winner, there generally has to be a loser.  In this case, that winner was GM, and its rise had to come at the expense of another automaker, in this case, Ford. F-Series sales dropped 13.1 percent in the first quarter of 2020, while sales of GM's full-sized Silverado and Sierra surged nearly 28% in the same period. FCA's Ram lineup managed a steady-as-she-goes 7% increase. All-in, GM finished the quarter with 197,743 full-size trucks sold to Ford's 186,562. Here's the full breakdown: Ford F-Series: 186,562  Chevrolet Silverado*: 144,734 Ram P/U: 128,805 GMC Sierra: 53,009 *includes 1,036 Medium Duty sales Things are a but murkier in the midsize segment, where the Chevy Colorado slipped 36% to just 21,430 units sold — just a few hundred better than the slow-selling Ford Ranger's Q1 numbers. The GMC Canyon experienced an almost identical slide, finishing the quarter with just 4,483 units sold. For perspective, Jeep sold more than 15,000 Gladiators and Toyota's midsize Tacoma slipped less than 8%, finishing the quarter with nearly 54,000 sales.  We suspect this discrepancy in full- and mid-size truck sales comes from shifting incentives. Ford, GM and FCA would like to keep selling bigger trucks because there's far more profit margin built into their list prices. Even with tens of thousands of dollars in manufacturer money on the hood, big trucks still make money.  Since these automakers report quarterly, we won't get another good look at these numbers until July, but if you thought that 2019 represented the new normal for U.S. auto sales, well, think again.