2001 Gmc Yukon Sport Utility 4-door 5.3l on 2040-cars

Auto blog

2015 Chevy Colorado and GMC Canyon order guides reveal added power

General Motors' Fleet Order Guide system is often the canary in the coal mine for interesting changes on new models. The recent guide for the 2015 Corvette unveiled all sorts of changes that weren't yet known about the sports car. Now, it's time for the 2015 Chevrolet Colorado and GMC Canyon to take their bow in the spotlight, and they look worth the wait. The new midsize trucks are getting a touch more power than first thought, as well as some very nice features.
Extended Cab models of both trucks come standard with a 2.5-liter, direct-injected four-cylinder rated at 200 horsepower at 6,300 rpm and 191 pound-feet of torque at 4,400 rpm. That's a bit more than the 193 hp and 184 lb-ft originally reported for the duo. The standard transmission for the extended trucks is a six-speed manual, but the Work Truck trim is also available with an optional six-speed automatic. Towing for the four-cylinder is rated at 3,500 pounds.
Crew Cab models come standard with a 3.6-liter V6 with 305 hp at 6,800 rpm and 269 lb-ft of torque at 4,300 rpm, with a six-speed automatic. That's also somewhat different than the originally reported rating of 302 hp and 270 lb-ft. Towing for the V6 is rated at 7,000 pounds.

2023 J.D. Power APEAL Study shows new-car customer satisfaction scores slip

J.D. Power survey results have been slightly up but mostly down for automakers this year, literally. In February, the 2023 Vehicle Dependability Study showed an overall decline compared the 2022 a month before the Customer Service Index Study did the same. The trend reversed in June with a better overall score on the 2023 U.S. Electric Vehicle Consideration Study than in 2022, then declined again the same month on with a lower overall score on the 2023 Initial Quality Study. The declines continue with the 2023 J.D. Power U.S. Automotive Performance, Execution and Layout (APEAL) Study, overall satisfaction among the 84,555 respondents down two points overall compared to 2022, to 845 out of 1,000 points. Because last year's score dropped compared to 2021, this year marks the first consecutive decline in the study's 28-year history. The study tries to "[measure] owners' emotional attachment and level of excitement with new vehicle" after 90 days of ownership by asking new owners to rate 37 attributes in 10 areas around the vehicle, such as the feeling they get when they hit the accelerator. Satisfaction with nine of the attributes is down this year versus last, fuel economy the only segment to show better results with 15 points more satisfaction. Styling and infotainment are big drags on satisfaction. Responses to new car exterior looks tallied 888 points, down from 894 last year, the largest drop in this year's study. On the digital side, less than half of those surveyed this year said they prefer using a manufacturer's built-in infotainment. From 70% of respondents in 2020 preferring to use a manufacturer's in-house software to play audio instead of Android Auto or Apple CarPlay, that's 56% in 2023. Going all-in on Google appears to have the best effect. J.D. Power said that vehicles with both Google's Android Automotive Operating System (AAOS) and Google Automotive Services (GAS) "score higher in the infotainment category than those with no AAOS whatsoever. AAOS without GAS receives the lowest scores for infotainment of the three categories."  Frank Hanley, senior director of auto benchmarking at J.D. Power, said, "Despite the technology and design innovations that manufacturers put into new vehicles, owners are lukewarm about them. While innovations like charging pads, vehicle apps and advanced audio features should enhance an owner’s experience, this is not the case when problems are experienced.

GM to sink over $900M into 4 plants, mostly for a new V8

FLINT, Mich. — General Motors says it will spend more than $900 million to update four factories, with the bulk going to an engine plant in Flint, Michigan, to build the next-generation V8 for big pickup trucks and SUVs. Factories in Rochester, New York; Defiance, Ohio; and Bay City, Michigan, also will see investments, some to make V8 engine components as well as parts for future electric vehicles, the company said Friday. The investments won't create any new jobs, but they will preserve about 2,400 hourly and salaried positions positions at the four sites, the company said. The investments “provide job security at these plants for years to come,” Gerald Johnson, GM's manufacturing chief, said in a statement. Much of the money, $579 million, will go to Flint Engine Operations for equipment to build the sixth-generation small-block V8 that will go into the next round of big pickup trucks and SUVs. The plant now employs about 700 people who also will keep making their current product, a diesel engine used in light trucks. GM, like other automakers, is facing stricter government fuel economy standards and pollution limits starting in the 2024 model year. New vehicles sold in the U.S. will have to average at least 40 miles per gallon of gasoline in 2026, up from about 28 mpg, under new Biden administration rules that undo a rollback of standards enacted under former President Donald Trump. That means the new V8 will have to get better mileage and pollute less than the current versions. Although GM wouldn't release details on the new engine, Johnson said during a news conference at the Flint plant that it would be more efficient than the current version. GM has a goal of selling only electric passenger vehicles by 2035, but Johnson said that's a dozen years out, a period when many customers will still want gas engines. “We know that has a horizon,” he said. “Between here and there, there are a lot of internal combustion customers that we don't want to lose,” he said. In addition to Flint, GM's engine components plant in Bay City, Michigan, will get $216 million to build camshafts and connecting rods, and to machine engine blocks and heads for the new V8 being built in Flint. The plant now employs about 425. The Defiance, Ohio, foundry will get $55 million to build a variety of block castings for the new V8. Included is $8 million for castings to support future electric vehicles, the company said. The plant has about 530 employees.