11 Yukon Denali 1500 Awd Certified 6.2l V8 Navigation 3rd Row Entertainment Nice on 2040-cars

Auto blog

Hummer EV SUV official range announced: 3X truck tops 350 miles

The first run of GMC Hummer EVs were in one single specification: pickup truck in Edition 1 with all the off-road goodies. The most pertinent of those off-road upgrades to electric range being the 18-inch wheels with mud-terrain tires. And it was rated for 329 miles. But now, there are more Hummer variants. The pickup truck is now available with a 3X trim that comes standard with more efficient all-terrain tires wrapped around 22-inch wheels, and there's the SUV with both trims and both types of tires, not to mention a smaller battery pack. And now we have the official range estimates for them. We'll start with the Hummer EV SUV, since all of the official range ratings are new to us. The tires are the key factor, with the all-terrain equipped Edition 1 and 3X both managing 314 miles of range. Yes, this is less than even the mud-terrain-equipped truck, but that's mainly because the shorter length of the SUV means it has fewer battery cells and capacity. It has about 170 kWh of capacity versus the truck's 200+. Adding the Extreme Off-Road Package and its more aggressive tires drops range to 298 miles. The Four-Wheel-Steer system lets the 2022 GMC HUMMER EV Pickup m View 17 Photos As with the SUVs, the Hummer EV truck gets a solid range boost to 355 miles when it's not equipped with the off-road package. There's another benefit to the regular all-terrains on the Hummer EV truck: towing capacity. At 8,500 pounds, it can tow an extra 1,000 pounds over the models with the off-road package. GMC also notes that another potential benefit to the all-terrain-equipped trucks is a suspension tuned for better on-road handling. And our experience has shown that even Hummer with the off-road package isn't too shabby on pavement. Of course, skipping the off-road package will also save you some money, as will opting for the 3X trims. So unless you're really going off-road seriously, and would make regular use of the extra skid plates, under-truck camera and chunky tires, the standard suspension and tire setup really is the way to go. Related video:

2017 GMC Acadia adds four-cylinder and All Terrain model

General Motors has officially started the process of updating its long-in-the-tooth fullsize CUVs by unveiling the second-generation GMC Acadia at the 2016 Detroit Auto Show. While the Acadia is 700 pounds lighter, it's also shorter and narrower, which means it's not quite the people mover it used to be. You'll no longer be able to haul eight passengers, although there will still be five-, six-, and seven-passenger offerings. While families might not be thrilled with the loss of a seat, the lighter weight is a net win. Not only will the V6 model feel more powerful and efficient – in addition to the lower curb weight, there's a new, 310-horsepower engine – but it will also likely be more economical. GM estimates the front-drive V6 will return 25 miles per gallon on the freeway, compared to 24 mpg for the current front driver, but city fuel economy remains pegged at 17 mpg. In a move we're not entirely sold on, though, the Acadia will also adopt a four-cylinder engine, and no, it's not GM's highly regarded 2.0-liter turbo. Instead, you'll be able to order this 4,000-pound CUV with a 2.5-liter, 194-horsepower four-cylinder. What it won't be able to provide in straight-line speed, it will make up for with fuel economy. GM is wagering the front-drive, four-cylinder Acadia will net 22 mpg in the city and 28 on the highway. Both engines are paired with a HydraMatic 6T75 six-speed automatic. A new All Terrain model is said to be optimized for wet, snowy and icy conditions, and its drive mode selector removes the Off Road selection in favor of All Terrain. We have live images of both the new Acadia Denali, as well as the new-for-2017 All Terrain model, direct from the floor of the 2016 Detroit Auto Show. There's also a video of the full GMC press conference with reactions from our editors. Check them out. GMC Introduces All-New 2017 Acadia * 700-lb. lighter, more efficient crossover aimed at heart of midsize segment * Expanded range of available active safety features, including Front Pedestrian Braking and Surround Vision Camera * New powertrains include a 2.5L I-4, offering a GM-est. 28 mpg hwy, and an available est. 310-hp 3.6L V-6 * Acadia Denali with new, exclusive Continuously Variable Ride Control * New Acadia All Terrain with an advanced AWD system with Active Twin Clutch * On sale this spring DETROIT, Tuesday, Jan.

Meet Alex Archer, the engineer behind GM's power-sliding center console

In 2009, a GM manager complained to a 59-year-old GM technician about the hassle of retrieving items from a pickup truck bed after driving shifted the cargo. In two days, the tech had come up with the ideas that, ten years later, would debut as the MultiPro tailgate. The engineering teams kept the tailgate secret in part by hiding mock-ups in a locked storage closet in GM's Vehicle Engineering Center in Warren Michigan for two years. A piece in the Detroit Free Press reveals that another storage closet in Warren would play the same role in a different cloak-and-dagger operation, this time for the power-sliding center console in GM's new full-sized SUVs. During a meeting in early 2017, bosses gave the job of the console's creation to 24-year-old design release engineer Alex Archer, just two years out of Stanford University with a degree in engineering and product design.  This time, the catalyst for the feature was an internal GM think tank called co:lab, where employees suggest ideas. Execs gave Archer the task because "They needed someone willing to ask a lot of questions," her 36-month mandate to produce a six-way console that could be a standard cubby or a gaping maw able to swallow four gallon jugs or hide a secret compartment. Clearly, she succeeded. It took Archer and the team nine months to devise a prototype, another six months to get the green light for production. As with the tailgate, the team working on the console grew to include designers, production engineers, and suppliers. Archer, now 26, shepherded the process, and her name is on the patent. "It took a ton of people, I'm just somebody who stuck with it the whole time," she said. GM like her work well enough to produce the "Day in the Life" segment above, five months before the world would hear about the console. Archer's path to engineering was as unlikely as getting the job for the console. She had entered Stanford with plans to be a doctor. But an innovation class during her freshman year, and a sophomore summer spent helping her grandfather rebuild a 1937 MG engine recharted her course. Her grandfather told her, "You know, you could be an engineer for a car company." Consumer reaction to Archer's work won't be far off, the SUVs slated to hit dealerships soon. Meanwhile, she's busy on something that could be just as intense as the console: Restoring a 1955 Packard Clipper in her garage. Head to Freep to check out the story of Archer and the console. Related Video: