Slt Navigation Dvd Heated Leather Seats Salvage Repairable Runs And Drives!!! on 2040-cars

Auto blog

'Killing a Duramax' Gale Banks YouTube series methodically tunes a diesel to death

Learning or perfecting a skill by watching YouTube videos is known as attending YouTube University. GM Authority picked up on one of the video site's more fascinating courses, hosted by Gale Banks; in a fair world, he should be referred to as Professor Banks when it comes to diesel engines and truck tuning. A few months after GM introduced the updated L5P 6.6-liter Duramax diesel V8 in the 2020 Chevrolet Silverado HD and GMC Sierra HD that ships with 454 horsepower and 910 pound-feet of torque, Banks decided he wanted to methodically tune the engine to death. The purpose of the resulting series, called "Killing a Duramax," is to push more power out of the engine in order to discover which parts break and when — or, as Banks puts it, force-feed the Duramax "until the crank hits the street and the heads hit the hood." With that knowledge, Banks can figure out all the weak points on his way to building what he calls a "Superturbo," that being a supercharged, twin-turbo race engine with more than 1,000 hp. What makes the series fascinating is Banks' knowledge, paired with the company's comprehensive iDash engine monitoring system that keeps tabs on a glut of parameters every step of the way. So for instance, you get Banks explaining the differences between inches of mercury and barometric pressure, how those are different from the water content of the air measured in grains, then showing those readouts on the iDash, then explaining in detail how they affect the air density in the Duramax system. The stock Borg-Warner variable turbo gets a lot of airtime — Banks accuses it of being "out to lunch" because he feels it's the weakest link on the engine. That turns into a turbo teardown and a deep explanation of performance pitfalls, such as when air pressure on the turbine begins to diverge from the boost pressure coming from the compressor. Banks says he can keep close tabs on where power's coming from, because the iDash monitors the horsepower contribution provided by the ambient air, the turbo, and the intercooler separately. The major changes so far are a stouter Precision 7675 turbo and TurboSmart wastegate (episode 5), a twin intake (episode 6), a custom liquid-cooled intercooler from a marine engine, a new GM oil cooler and synthetic oil (episode 10), and new injectors (episode 11).

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

GM follows Ford and Honda in skipping SEMA

The list of automakers skipping SEMA has become longer. First reported by Muscle Cars and Trucks, and confirmed to us by a company representative, General Motors will not have an official presence at the aftermarket show. It joins Ford and Honda in leaving the show. It will be a large hole in the show, with the GM brands typically filling a significant swath of available show space in one of the main halls. GM hasn't provided much explanation for the move, either. The GM representative provided Autoblog with the same statement that Muscle Cars and Trucks got: "GM has made the decision not to participate in the 2022 SEMA Show. The SEMA show has always inspired us, and accessories and performance parts remain an important part of our business." We also asked if we would see any sort of announcements around the time of the show — Ford said it has plans to share some things around that time — however, the GM representative said that the company has no immediate plans for announcements. Certainly things could change between now and the November show, though. SEMA had previously noted that other exhibitors would help fill in some of the space vacated by these major OEMs. Another OEM, Volkswagen, is returning to the show after an absence, which will also help with the display deficit. Related Video: