2023 Gmc Terrain Awd At4 on 2040-cars

Auto blog

GM issues CUV stop-sale due to Goodyear tires [UPDATE]

UPDATE: A previous version of this story incorrectly stated that only 6,281 tires were installed on the CUVs, when in actuality, there were 6,281 CUVs affected by the stop-sale order, totaling 25,124 tires. The story has been edited to reflect this. General Motors has issued a stop-sale order on some 6,300 of its Lambda platform crossovers due to a pending recall on their 18-inch Goodyear Fortera HL tires. The affected vehicles include all three flavors of GM's large CUV platform, consisting of the 2015 Chevrolet Traverse, GMC Acadia and Buick Enclave. Goodyear is recalling a total of 48,500 Fortera HL tires after discovering "very small" cracks in the tread, found during internal testing. Of the affected tires, 32,100 were made for GM, Goodyear told Automotive News. According to GM, 6,281 CUVs were fitted with the questionable rubber, totaling 25,124 of the company's 32,100 tires. The remainder were stocked as replacements, a GM rep told Autoblog. The remaining 16,400 tires were built specifically for the aftermarket. Goodyear reports that the cracks do "not indicate a safety issue." Meanwhile, a GM spokesman told AN that stop-sale "will eventually lead to a non-compliance recall by GM." Featured Gallery 2015 Chevrolet Traverse View 21 Photos News Source: Automotive News - sub. req. Recalls Buick GM GMC Safety Crossover gmc acadia chevy traverse goodyear

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GM seatbelt recall affects over 1m Silverados and Sierras

The Basics: General Motors will recall 895,232 examples of the 2014-2015 Chevrolet Silverado and GMC Sierra 1500 pickups in the US. The campaign will also affect the trucks in markets worldwide, and the total number the company will recall is 1,037,982. The Problem: A steel cable connects the seatbelt to the vehicle, but over time repeated bending can cause the part to fatigue and separate. Injuries/Deaths: None reported. The Fix: Dealers will enlarge the side shield opening and install a pusher bracket on the tensioner. Technicians will also replace the entire tensioner assembly if necessary. If You Own One: GM will contact owners about the recall. The company hasn't said when those notifications would begin. More Information: There are still about 3,000 new examples of these older pickups at dealerships. Until mechanics fix the problem, these vehicles are subject to a stop-sale. Similar problems have affected the General's vehicles in the past. In 2015, the company recalled over 400,000 units of the 2011-2012 Chevrolet Malibu for fatiguing cables. It also hit over a million Lambda platform crossovers in 2014. GM Recalling Certain 2014-15 Pickups to Repair Seat Belts DETROIT – GM is voluntarily recalling 895,232 model year 2014-15 Chevrolet Silverado and GMC Sierra 1500 pickups in the United States because the flexible steel cable that connects the seat belt to the vehicle can fatigue and separate over time as a result of the driver repeatedly bending the cable when entering the seat. This issue was discovered through warranty data, and there have been no reports of crashes, injuries or fatalities related to this issue. For trucks in the field, dealers will enlarge the side shield opening, install a pusher bracket on the tensioner, and if necessary, replace the tensioner assembly. The recall in the United States includes a stop-sale of approximately 3,000 new 2014 and 2015 model year pickups still on dealer lots. Dealers will repair the vehicles prior to delivering them to customers. Customers will be notified by General Motors. They also can look up their vehicle identification number (VIN) at either https://vinrcl.safercar.gov/vin/ website or at https://my.gm.com/web/portal/ownercenter to see if their vehicle is part of the recall. GM also will voluntarily recall and repair these models in other countries where they are sold, including Canada, Mexico, and several countries in Latin America and the Middle East.