2014 Gmc Terrain Slt-1 on 2040-cars

Auto blog

Cadillac Celestiq, Lyriq, Hummer, other future GM electric cars: Here's everything we saw at ‘EV Day’

WARREN, Mich. — Today, General Motors held an “EV Day” event at its Warren, Michigan, campus to present its new “Ultium” battery technology, modular electric vehicle architecture and soon-to-come electric vehicles. Unfortunately, we were forbidden from bringing cameras into the event, so while we canÂ’t show you what we saw, we can tell you more about it. While we saw the previously teased Cadillac EV (which we now know to be called the Lyriq) and the GMC Hummer pickup teased during the Super Bowl, there were a number of other future cars at the event, which GM President Mark Reuss assured us are all real vehicles in the works. The biggest surprise came at the end of the event, though, in the Cadillac Celestiq electric sedan, which Reuss described as a future flagship that would be hand-built “very locally.” It had been hiding under a dark sheet all morning, with the front and rear illuminated Cadillac emblems shining from underneath. When the wraps came off, we saw a long, white, four-seat fastback sedan. The 23-inch wheels were pushed out to the very corners of the car, giving it what appeared to be a very long wheelbase. The model on the stage had no side mirrors or visible door handles. The grille mirrored that of the Lyriq crossover next to it, with integrated lighting in lieu of the usual mesh or slats youÂ’d see in an internal combustion car. The entire roof, all the way until it tapered to the tail of the vehicle, was tinted glass. In back, vertical tail lighting ran down the C-pillar before turning rearward across the top of the trunk. Inside, everything below the beltline of the windows — essentially all but the headrests and top portion of the steering wheel, was hidden from view. Behind the Celestiq, a large digital display showed a rendering of its interior. The dash consists of a pillar-to-pillar curved LED display serving as both instrument panel and infotainment system. Protruding forward between the front seats was another touchscreen that appeared to house some more controls, with open area, probably for storage, below it. The rear seats had the same sort of touchscreen between them. Built into the back of the front seats were a pair of rear-seat entertainment screens, much like we saw in the Lyriq. The door panels blended wood, metal and animated lighting to give character and a sense of opulence. GM interior design manager Tristan Murphy was on hand to tell us a bit more about the Celestiq.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Next Chevy Silverado could get this built-in tailgate step

General Motors just received patent approval for a tailgate step in a pickup bed. And given the timing, don't be surprised if you see this on the upcoming 2019 Silverado pickup (not the mention its GMC Sierra twin), expected to arrive in late 2018. According to the patent, granted in December of last year, the whole mechanism is housed in the tailgate assemble. The magic happens when a portion of the top half of the tailgate swings down and a step folds out. There's also a handle that locks into position to help climb up into the bed. As trucks get bigger and taller over the years, it gets harder and harder to access the cargo bed. Ford's solution with the 2009 F-150 was a step that slides out from the end of the tailgate. Back then, Chevy made an ill-advised ad highlighting the feature for Ford. And while Howie Long mocked the F-150's "man step" Ford saw almost a third of its trucks with the option in the first year. The GM design seems to improve on Ford's idea as it appears to be wider and has a back to the lower step. That is, you don't have to worry about stepping through the ladder-rung design as on the F-150. Ford's tailgate step later spread to the F Super Duty, and other cargo access assists have proliferated through the truck world. On the most recent redesign, the Chevrolet Silverado took a trick from the Avalanche and added cutouts to the corners of the rear bumper that act as a foothold. Ford also offers a deployable side step, Chevrolet has running boards that scoot rearward with a kick of the boot, and Ram offers fixed wheel-to-wheel side rails. Nissan is in on the game too, with an optional folding step that tucks under the rear bumper. We don't expect Chevrolet to comment on when or if we'll see this feature in the showrooms. But given that engineers are already hard at work on the next Silverado and the timing of this patent lines right up with the new truck's development cycle, we'll be disappointed if this patent stays in the file cabinet. Related Video: