2014 Gmc Terrain Sle-1 on 2040-cars

Auto blog

2017 GMC Acadia loses 700 pounds, gains everywhere else

Ladies and gentlemen, welcome to Acadia. The 2017 version of the three-row GMC crossover has all kinds of newness. The 2017 Acadia has lost 700 pounds compared to its predecessor thanks to high-strength steels allowing redesigned parts, and the fact that it overall, the vehicle is actually smaller. Length is reduced by 7.2 inches on a wheelbase diminished by 6.4 inches, it is 3.5 inches narrower and sits 3.9 inches lower. The 2016 Acadia was 4,656 pounds, the 2017 is 3,956 pounds. GMC says it will still swallow people, but not as many: the eight-passenger option didn't make the transition, potential three-row trims permitting five-, six-, and seven-passenger configurations. While you lose space, you gain convenience with a split-folding second row featuring tilt-and-slide for both sections. The third-row seats fold flat into the cargo floor, and if the second row is folded as well, cargo capacity improves over the 2016 Acadia, 79 cubic feet compared to 70 cu-ft. A new 2.5-liter four-cylinder brings a second engine option to the spec sheet, returning an estimated 22 city miles per gallon and 28 highway mpg with the help of stop/start tech on front-wheel-drive trims. The new 3.6-liter V6 gets around 310 horsepower, a power bump of about 19 hp, and an estimated 25 highway mpg in front-wheel-drive guise. Towing capacity for that V6 goes down, though, from 5,200 on the current Acadia to an estimated 4,000 pounds. The optional Tow Vision Trailering system will make that pulling easier. Both engines are hooked to a six-speed automatic. Now we can get to its looks. Trademarks like the square, flared wheel arches, dark D-pillars, and wraparound rear side windows made the transition, everything else is new. While weight has gone down, safety's gone way up with internal changes like the splayed chassis members to confront the small-offset test. New active safety upgrades run from from three kinds of automatic braking systems to surround vision cameras, automatic high beam control, a safety alert seat, and a following distance indicator. Buyers can choose from a front-wheel drive, all-wheel drive, or All Terrain model, each with its own electronic drive selector modes. The Normal, Sport, and Trailer/Tow modes are common to the trio. The FWD gets a Snow mode, the AWD adds adaptive 4x4 and Off Road modes; on the AWD, the 2x4 mode disconnects the rear axle from the drivetrain.

GMC Hummer EV First Drive Review | True supertruck, for better and for worse

Right from the start, the 2022 GMC Hummer EV has been advertised with superlatives, mostly in reference to its specifications. GMC has even called it a "supertruck" in its own materials. And while we've received a taste of the truck before, only now have we finally got our hands on the production-spec model, and had the opportunity to drive it both off-road and on the street. What we've found is that the Hummer EV is undoubtedly a supertruck, much the same way that a Ferrari or a Lamborghini is a supercar. It totally delivers on its incredible capabilities, but there are compromises. And they're worth being aware of before plunking down the more than $100,000 a first-year Hummer will run you. That six-figure truck is the version we tested, the Edition 1, which actually rings in at $112,595. It's the only version in production for now, with lower trims coming in the next couple years. It's sold out, but many of the features will be available on the next highest trim level, the EV 3X. Among those features are the three motors, torque vectoring, “Watts To Freedom” launch mode, four-wheel steering, removable glass roof panels, 35-inch tires, Super Cruise, power rear window and MultiPro tailgate. In other words, although you can literally no longer order an Edition 1, you can still order a Hummer EV with nearly the same specification. This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. We'll start where most owners probably will: mashing the throttle. No one can resist seeing what 1,000 horsepower and 1,200 pound-feet of torque will feel like. It's even a tad more torque in Watts To Freedom mode, which preemptively runs the cooling system to enable the additional twist. That mode allows the Hummer to hit 60 mph in 3 seconds, and the drama is dialed up with visual, audible and haptic cues. But even without engaging launch mode, the Hummer EV impresses and delights with its acceleration. In addition to pinning you to the seat, the entire truck squats in an exaggerated fashion. It's absurd, especially considering the truck's curb weight that surpasses a truly astounding 9,000 pounds. ThatÂ’s several hundred pounds more than the heaviest GMC Sierra HD 3500 diesel dually. Of course, that weight, as well as the nature of electric motors, means the party starts to calm down as the speed increases. The weight is noticeable in other areas, too.

Specialty Vehicle Engineering's 750-horsepower GMC Canyon fully revealed

GMC's celebrated Syclone will turn 30 in early 2021, but nothing suggests the company will mark the occasion by releasing a modern interpretation of the pickup. New Jersey-based tuner Specialty Vehicle Engineering (SVE) is taking the matter into its own hands by building a limited number of GMC Canyon trucks with Hellcat-like power. Although the original Syclone received a turbocharged V6, the 2021 model gains a 5.3-liter V8 normally found in bigger vehicles, including the Sierra and Yukon. SVE rebuilt it with forged aluminum pistons, forged steel connecting rods, high-lift valve springs, a custom crankshaft and upgraded fuel injectors among other aftermarket parts. It also added a supercharger to raise the eight's output to 750 horsepower and 600 pound-feet of torque. Power flows to the four wheels via a strengthened 8-speed automatic transmission and a permanent all-wheel-drive system. For context, the first Syclone gave the Chevrolet Corvette a run for its money with a fuel-injected, 4.3-liter V6 turbocharged to 280 horsepower and 360 pound-feet of torque. These numbers were spectacular in the early 1990s since the Sonoma that Syclone was based on shipped with the 105-horse Iron Duke four-cylinder as standard. Even compared with the Sonoma GT that got a naturally aspirated 4.3-liter V6 with 195 horsepower and 260 pound-feet of torque, the Syclone was impressive. SVE installed six-pistons front calipers that clamp 13.6-inch slotted rotors, and it kept the factory brakes out back. It also lowered the suspension by two inches in the front and five inches in the back, upgraded the shocks, and added a heavy-duty rear sway bar. These modifications help drivers make the most of the extra power, but SVE hasn't published performance specifications (like the truck's zero-to-60-mph time) yet. Surprisingly, the eight-cylinder weighs almost the same as the V6 it replaces so the engine swap doesn't affect weight distribution. Visually, the Syclone can't be mistaken for a run-of-the-mill Canyon. It wears a deep front bumper, has cladding over the rocker panels and rides on 20-inch alloys. Edition-specific emblems round out the look, and the list of options includes a body-colored grille as well as a folding tonneau cover. SVE's images show a truck painted black, which was the only color offered on the 1991 model, but it's available in any factory hue. Inside, the modern-day Syclone gains special floor mats and a numbered plaque on the dashboard. Leather is optional.