2012 Terrain Slt Awd Leather Pioneer Audio 1-owner Low Miles! on 2040-cars

Auto blog

GMC Acadia goes big again? Spy photos show next-gen prototype

GMC is testing what looks a lot like a new full-size SUV, signaling the likelihood that it will return to full-size segment after the current generation has run its course. GM downsized the Acadia for the 2017 redesign, carving nearly 10 inches off its length and 3 inches from its girth. For the next generation, it appears that script will be aggressively flipped.  The hierarchy of GM's unibody family SUVs was already a bit wonky before the Acadia's 2017 redesign, and continues to be now. While it would be logical for the Chevrolet Traverse, GMC Acadia, Buick Enclave and Cadillac XT6 — all three-row crossovers — to be different skins on the same fundamental chassis, that's not actually the case. The Acadia is a full foot shorter than either the Traverse or Enclave, with the XT6 falling in between. Based on these photos, that will no longer be the case when the new GMC Acadia debuts. Since the current one went on sale in 2016 as a 2017 model, it's about due for a replacement.  We can't see much beyond basic proportions here, but those tell a clear story. It's pretty obvious that the hood on the prototype is wider and sits higher than on the current car, with perhaps less slope to the now-wider nose. We can also see the faintest impressions of creasing on the flanks, likely leading to the same broad, angular hip treatment present on the current car. Viewed side-by-side, we can see a little more front and rear overhang. There's no obvious hint of substantially longer wheelbase here (the rear doors line up almost perfectly), so we're probably looking at something that is wider but not necessarily much longer.  In any event, we shouldn't have to wait too long to find out exactly what GM has in store for its "Pro" brand.  Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

2015 Chevy Colorado to start at $20,100*, GMC Canyon at $20,995**

General Motors has just announced pricing for its new midsize pickup trucks, the 2015 Chevrolet Colorado and GMC Canyon. Chevy's truck starts at $20,100, *not including $895 for destination, and the GMC starts at $20,995, **not including $925 for destination. These prices are for the base, extended cab models with the 200-horsepower, 2.5-liter inline four-cylinder engine.
Comparatively, these prices fit nicely with the $18,125 starting MSRP of the Toyota Tacoma and the $21,510 of the Nissan Frontier. Compared to the Colorado, the Canyon's extra $895 gets you niceties like LED running lamps, 16-inch alloy wheels, and a four-way power driver's seat.
Both trucks come standard with the 2.5-liter engine, and a more powerful, 305-hp 3.6-liter V6 will also be available. Pricing has not been announced for the upcoming diesel model, which is expected to launch for the 2016 model year.