1997 Gmc C1500 Suburban 4-door 5.7l, 4x4 on 2040-cars

Auto blog

Even if GM does close all 5 of those plants, it'll still have too many

DETROIT — General Motors' monumental announcement on Monday that it will close three car assembly plants and two powertrain plants in North America and slash its workforce will only partially close the gap between capacity and demand for the automaker's sedans, according to a Reuters analysis of industry production and capacity data. Sales of traditional passenger cars in North America have been declining for the past six years and are still withering. After GM ends production next year at factories in Michigan, Ohio and Ontario, it will still have four U.S. passenger-car plants — all operating at less than 50 percent of rated capacity, according to figures supplied by LMC Automotive. In comparison, Detroit-based rivals Ford and Fiat Chrysler Automobiles will have one car plant each in North America after 2019. The Detroit Three are facing rapidly dwindling demand for traditional passenger cars from U.S. consumers, many of whom have shifted to crossovers and trucks. Passenger cars accounted for 48 percent of retail light-vehicle sales in the United States in 2014, according to market researchers at J.D. Power and Associates. This year, sedans will account for less than a third of light vehicle sales. That shift in turn has left most North American car plants operating far below their rated capacities, while many SUV and truck plants are running on overtime. The collapse in passenger-car demand is a challenge for nearly all automakers in the United States, including Japan's Toyota and Honda, which have the top-selling models in the compact and midsize car segments. Toyota executives said last month they are evaluating the company's U.S. model lineup. But Toyota also plans to build compact Corolla sedans at a new $1.6 billion factory it is building in Alabama with partner Mazda. The obstacles facing GM in its plans to close more auto factories became apparent on Tuesday as U.S. President Donald Trump threatened to block payment of government electric vehicle subsidies to GM. While it is not certain that Trump unilaterally has the power to do that, he made it clear he intends to use his office to pressure the company to keep open a small car plant in Ohio that GM says will stop building vehicles in March.

2021 GMC Canyon AT4 Road Test | The everyday tool

Bold take: The GMC Canyon is the most well-rounded midsize truck. Admittedly, “well-rounded” is a lukewarm compliment, but the Canyon does nearly everything well. It is not the flashiest, which is undeniably the Jeep Gladiator. Or the most comfortable, which is the Honda Ridgeline. But for those seeking a midsize truck that looks like a truck, drives like a truck and has a solid interior, the Canyon is the right formula. We would test the 2021 GMC Canyon AT4 for a week and find that itÂ’s pleasant, capable and sturdy off-road. We would haul a bookshelf in the bed, get dirty during a woodsy soft-road jaunt and pile up the miles running around town. In short, itÂ’s exactly what most need in a midsize truck.  The AT4 model is new for 2021, and it replaces the All-Terrain model, a move GMC is rolling out across its lineup. The AT4 adds an off-road-tuned suspension with hill-descent control, beefy 31-inch Goodyear Wrangler DuraTrac tires wrapped around 17-inch aluminum wheels, standard four-wheel drive with locking rear differential and a transfer case skid plate. The AT4 punches up the CanyonÂ’s appearance with red tow hooks, dark chrome elements and a bigger grille thatÂ’s similar to the SierraÂ’s. The Canyon Denali, which was also refreshed for ‘21, is showier, but the AT4 trim feels cooler with its understated off-road vibes. Considering this, we head out for an afternoon drive along a familiar route through DetroitÂ’s northern suburbs. The Canyon is a solid daily driver. The 3.6-liter V6 rated at 308 horsepower and 275 pound-feet of torque is widely used in General Motors vehicles. ItÂ’s powerful and actually sounds pretty good — even throaty — in GMCÂ’s midsize truck. Our passengers are surprised to be pulled back in their seats during hard acceleration, and the eight-speed automatic transmission is well-calibrated for the many jobs the Canyon is called upon to perform. This powertrain, standard in the AT4 and Denali trims, is a step up from the 2.5-liter inline-four and six-speed auto offered on the lower models. ItÂ’s worth it. The 2.8-liter Duramax diesel is an option on higher-spec Canyons, and its 369 lb-ft of torque is tantalizing. For everyday use, take the V6. Our tester with the gasoline V6 and four-wheel drive can tow as much as 7,000 pounds, has a maximum payload of 1,609 pounds and has respectable fuel economy of 17 mpg in the city and 24 mpg on the highway.

2017 GMC Acadia adds four-cylinder and All Terrain model

General Motors has officially started the process of updating its long-in-the-tooth fullsize CUVs by unveiling the second-generation GMC Acadia at the 2016 Detroit Auto Show. While the Acadia is 700 pounds lighter, it's also shorter and narrower, which means it's not quite the people mover it used to be. You'll no longer be able to haul eight passengers, although there will still be five-, six-, and seven-passenger offerings. While families might not be thrilled with the loss of a seat, the lighter weight is a net win. Not only will the V6 model feel more powerful and efficient – in addition to the lower curb weight, there's a new, 310-horsepower engine – but it will also likely be more economical. GM estimates the front-drive V6 will return 25 miles per gallon on the freeway, compared to 24 mpg for the current front driver, but city fuel economy remains pegged at 17 mpg. In a move we're not entirely sold on, though, the Acadia will also adopt a four-cylinder engine, and no, it's not GM's highly regarded 2.0-liter turbo. Instead, you'll be able to order this 4,000-pound CUV with a 2.5-liter, 194-horsepower four-cylinder. What it won't be able to provide in straight-line speed, it will make up for with fuel economy. GM is wagering the front-drive, four-cylinder Acadia will net 22 mpg in the city and 28 on the highway. Both engines are paired with a HydraMatic 6T75 six-speed automatic. A new All Terrain model is said to be optimized for wet, snowy and icy conditions, and its drive mode selector removes the Off Road selection in favor of All Terrain. We have live images of both the new Acadia Denali, as well as the new-for-2017 All Terrain model, direct from the floor of the 2016 Detroit Auto Show. There's also a video of the full GMC press conference with reactions from our editors. Check them out. GMC Introduces All-New 2017 Acadia * 700-lb. lighter, more efficient crossover aimed at heart of midsize segment * Expanded range of available active safety features, including Front Pedestrian Braking and Surround Vision Camera * New powertrains include a 2.5L I-4, offering a GM-est. 28 mpg hwy, and an available est. 310-hp 3.6L V-6 * Acadia Denali with new, exclusive Continuously Variable Ride Control * New Acadia All Terrain with an advanced AWD system with Active Twin Clutch * On sale this spring DETROIT, Tuesday, Jan.