2024 Gmc Sierra 3500 Denali Ultimate Pickup 4d 6 1/2 Ft on 2040-cars

Auto blog

GM now finishing and shipping pickups it had parked for lack of chips

DETROIT — General Motors is more than halfway through shipping newly-assembled pickups that it had parked due to a shortage of semiconductor chips, a top executive at the No. 1 U.S. automaker said on Friday. "We've made great progress," Steve Carlisle, GM's North American chief executive said at the Reuters Events Automotive Summit. "We're a bit better than halfway through that at the moment and our goal would be to clear out our '21 model years by the end of the year. We'll have a bit of a tail of '22 model years into the new year but not for too long." The global chip shortage has forced automakers like GM to idle production or in some cases mostly build vehicles and then park them until the necessary chips can be installed, allowing those vehicles to be then shipped to dealers. Last month, GM Chief Financial Officer Paul Jacobson cautioned that GM's third-quarter wholesale deliveries could be down by 200,000 vehicles because of chip shortages. He did not break out what share of that was trucks. To expedite transportation of newly-built vehicles to dealers, Carlisle said GM bought a number of car haulers to deliver them from factories or distribution centers. The Detroit automaker has also allowed dealers to pick the vehicles up themselves in some locations. Carlisle said new vehicle inventories have shrunk to below 20 days in the United States due to the supply chain disruptions, but the company wants to get that back up to 30 to 45 days with some getting to 60 days depending on the product line. GM sees sales of gasoline-powered vehicles being steady over the decade and real growth opportunity in electric vehicles and software, with one not undermining the other, he said.  

2023 GMC Canyon revealed with new ZR2-based AT4X trim

Following up on the reveal of its twin, the Chevy Colorado, the 2023 GMC Canyon has made its appearance. Naturally, it shares much with the Chevy pickup, but GMC has gone to greater lengths to differentiate the truck. It comes standard with the high-output engine, all versions feature the wide-track suspension setup, and in addition to the now more luxurious Denali, there's a ZR2-based AT4X trim. As with the new Colorado, the Canyon gets an overhaul of the design. It's down to one bed and cab configuration (short-bed, crew cab), and it features a longer wheelbase with the front axle pushed forward. The Canyon does get a variety of unique design features, though. It has its own front fascia with a tall, rectangular grille. LED lighting is standard on all Canyon models all the way around. That includes the unique fender lights like those found on the Sierra HD. All Canyons also feature the wide-track off-road suspension like the Colorado Z71 and Trail Boss. There are no narrow-track, narrow-body versions, even on the base two-wheel-drive Elevation. That suspension also means all Canyons have a roughly two-inch lift over base Chevy Colorados. The GMCs also get standard 32-inch tires, and they don't feature a front air dam in order to provide better approach angles. The bed, while only available in one trim, is available with a unique storage bin in the tailgate. On the topic of suspension specs, the Elevation and AT4 trim levels have 9.6 inches of ground clearance. The Denali increases that to 10.5 inches, and the AT4X features 10.6 inches. It also picks up the Multimatic spool-valve shocks from the ZR2. But we'll talk more about what comes on the AT4X in a bit. Under the hood of the Canyon is just one engine. It gets the highest-output version of the 2.7-liter turbocharged four-cylinder. The engine makes 310 horsepower and 430 pound-feet of torque. The only transmission is an eight-speed automatic. Two-wheel drive comes standard on Elevation, and other trims come standard with four-wheel drive. The inside of the Canyon is very similar to the Colorado, but it has some unique cues. It has air vents that are more integrated into the squared-off dashboard design, rather than the Chevy's round vents. It has a differently shaped dash pad and trim surrounds, too. The really big differences come on the Denali and AT4X trims, though. The Denali features real wood trim with laser etchings. It also gets lots of real leather and fancy stitching.

GMC Canyon AT4 OVRLANDX concept previews potential Bison-like model

GMC is signaling a move into serious off-road territory with this Canyon AT4 OVRLANDX concept. As its name suggest, this one-off was put together as a demonstration of what an overland-style GMC midsizer could potentially look like, but a glance beneath the surface reveals the bones of what we expect to be the forthcoming Canyon AT4X.  While "AT4" has been trickling down through the GMC lineup for the past few model years, AT4X kicks the basic off-road formula up a notch, a la Chevrolet's Colorado ZR2, which gains extra underbody protection, locking front and rear differentials and Multimatic's phenomenal DSSV dampers.  GMC Canyon AT4 OVRLANDX Off-Road Concept View 23 Photos OVRLANDX takes that to the next level, borrowing (and building upon) cues from the even-more-rugged ZR2 Bison, including rocker panel guards, cast-iron control arms, a custom front bumper with an integrated winch, built-in front recovery points, wheel arch trim with integrated LED task lighting, and guy lines for protecting the windshield from low-hanging branches. The custom rear bumper is even from American Expedition Vehicles (AEV), with whom Chevy partnered to produce the Bison's unique exterior bits. Does that seem like a wink and nod to you? “We wanted to showcase GMC Canyon with this concept and punctuate GMCÂ’s commitment to premium, off-road capable vehicles,” said Buick & GMC Global Vice President Duncan Aldred. "Consumer reaction to this conceptÂ’s design will help us further serve the growing market of buyers leading authentic outdoor lifestyles." This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings. To that end, they threw a few more goodies at the concept. In a way, the roof-mounted tent, awning, cooler and kitchenette are just there to disguise the fact that GMC will likely build a production pickup with much these same specs when the new model debuts for the 2023 or 2024 model year – or perhaps even sooner. While this concept is built around GM's existing 3.6-liter V6 powertrain, the redesigned Canyon is expected to be offered with just one engine: a 2.7-liter turbocharged four-cylinder lifted from the Silverado and Sierra pickups.  Rumors have pointed to a GMC variant of the Colorado ZR2 since the midsize pickup adopted the AT4 branding for its off-road variant.