1996 Gmc Sierra C/k 3500 Service Utility Truck - Non Operational-bad Head Gasket on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

Junkyard Gem: 1973 GMC Sierra Grande Camper Special

Starting in the 1973 model year, General Motors introduced the "Rounded Line" family of C/K-series Chevrolet and GMC trucks, and sales of the pickup versions continued all the way through 1987. Nice examples of these trucks can sell for large money, but the junkyard teaches us that not all collectible vehicles are worth rescuing and fixing up. Here's a reinforcement of that lesson, courtesy of a first-year GMC C2500 Camper Special with the high-zoot Sierra Grande trim level, found in a self-service yard just outside of Denver, Colorado. I'm no GM truck expert, but I know enough to stay clear of the battles over what to call this pickup. Let's just say it's a three-quarter-ton, rear-wheel-drive third-gen C-Series with really cool badges. Yes, I bought this badge for my garage wall, and it was totally worth the $4.23. GM came up with the Camper Special package during the late 1960s, when removable pickup campers became popular, and for 1973 it included heavy-duty springs and a wiring harness made to plug into the connectors on slide-in truck campers. It also included woodsy-looking badges, but someone pried the ones off this truck before I could buy them. This may well have been a one-owner truck, because it still had original warranty paperwork inside. Here we see that it was purchased new on August 2, 1973 (which happens to be the day that George Brett got his very first hit in the big leagues) by a resident of Compton, California. Yes, that Compton. The build tag tells us that this Camper Special was born at the Fremont Assembly plant in California, which became the GM-Toyota NUMMI venture in 1984 and is now the Tesla Factory. I think most 1973 C/K pickups sold new in Colorado would have come from Pontiac Assembly in Michigan. There was a time, not many years ago, when a genuine 454-cubic-inch (that's 7.4 liters to those of you sweating under the oppressive weight of the French Empire's Measurement System) big-block Chevrolet engine would have been yanked out and purchased within hours of hitting the rows of a yard like this. These days, engine-swappers can get more power with less weight from any number of donor vehicles. If this engine is the original 454, it was rated at 240 horsepower and 355 pound-feet (down from 270 hp in 1972 due to emissions-related changes). This truck had a three-speed automatic transmission, like most optioned-up Detroit pickups of its era.

GMC Sierra 1500 AT4X: Can you sleep in it?

Autoblog may receive a share from purchases made via links on this page. Pricing and availability are subject to change. The recently introduced GMC Sierra AT4X is an impressive combination of off-roading and luxury. But can you sleep in it? Pickups are great for towing campers or as a platform upon which to build out overlanding rigs, but from the factory they usually aren’t as useful as SUVs to sleep in, considering half of the length of the vehicle is taken up by the bed. Let's see how the AT4X fares. Space The biggest thing to consider when it comes to camping in your car is whether or not there is enough space in it for you and possibly a partner to lay down comfortably. This is tough when it comes to pickup trucks, which are hampered by the fact that half (or more) of the length of the vehicle is taken up by the bed of the truck. Some trucks have added features like lie-flat seats that make sleeping in them a bit easier, though itÂ’s still not a perfect solution. Unfortunately the AT4X is not one of those trucks. While the seats do lay back quite a good amount, I wasnÂ’t able to get comfortable enough to rely on them for a good nightÂ’s rest. To the rear we go. If youÂ’re vertically challenged, you may be in luck, especially if you donÂ’t sleep stretched out. The Sierra 1500 is a wide truck, almost 7 feet wide in fact. The rear bench measures 56 inches in width, which isnÂ’t a great option for most adults unless you really like sleeping in the fetal position. ItÂ’ll do in a pinch but I wouldnÂ’t expect to get a great night's sleep again and again.  Below the bench, which folds up and out of the way, is a relatively flat floor which can offer a bit more length. At 63” it still isnÂ’t enough for me to lie down with the doors closed, but it is much less cramped than spending the night on the bench. The subtle bump in the middle of the floor, which is much less severe than the ridges in the bed, can easily be remedied by an inflatable sleeping pad like the Sea to Summit Ether Light XT, or, even better, a cheap air mattress from Walmart. The Bed The bed of the AT4X seems like the most logical place to sleep. After all, it is named the bed for a reason right? If you have an inflatable mattress, then sure, but due to the ridges on the floor, a simple sleeping pad and sleeping bag will not be enough here. Additionally, the length of the bed leaves something to be desired.