Diesel. Good Condition. on 2040-cars

Auto blog

2021 GMC Canyon AT4 Road Test | The everyday tool

Bold take: The GMC Canyon is the most well-rounded midsize truck. Admittedly, “well-rounded” is a lukewarm compliment, but the Canyon does nearly everything well. It is not the flashiest, which is undeniably the Jeep Gladiator. Or the most comfortable, which is the Honda Ridgeline. But for those seeking a midsize truck that looks like a truck, drives like a truck and has a solid interior, the Canyon is the right formula. We would test the 2021 GMC Canyon AT4 for a week and find that itÂ’s pleasant, capable and sturdy off-road. We would haul a bookshelf in the bed, get dirty during a woodsy soft-road jaunt and pile up the miles running around town. In short, itÂ’s exactly what most need in a midsize truck.  The AT4 model is new for 2021, and it replaces the All-Terrain model, a move GMC is rolling out across its lineup. The AT4 adds an off-road-tuned suspension with hill-descent control, beefy 31-inch Goodyear Wrangler DuraTrac tires wrapped around 17-inch aluminum wheels, standard four-wheel drive with locking rear differential and a transfer case skid plate. The AT4 punches up the CanyonÂ’s appearance with red tow hooks, dark chrome elements and a bigger grille thatÂ’s similar to the SierraÂ’s. The Canyon Denali, which was also refreshed for ‘21, is showier, but the AT4 trim feels cooler with its understated off-road vibes. Considering this, we head out for an afternoon drive along a familiar route through DetroitÂ’s northern suburbs. The Canyon is a solid daily driver. The 3.6-liter V6 rated at 308 horsepower and 275 pound-feet of torque is widely used in General Motors vehicles. ItÂ’s powerful and actually sounds pretty good — even throaty — in GMCÂ’s midsize truck. Our passengers are surprised to be pulled back in their seats during hard acceleration, and the eight-speed automatic transmission is well-calibrated for the many jobs the Canyon is called upon to perform. This powertrain, standard in the AT4 and Denali trims, is a step up from the 2.5-liter inline-four and six-speed auto offered on the lower models. ItÂ’s worth it. The 2.8-liter Duramax diesel is an option on higher-spec Canyons, and its 369 lb-ft of torque is tantalizing. For everyday use, take the V6. Our tester with the gasoline V6 and four-wheel drive can tow as much as 7,000 pounds, has a maximum payload of 1,609 pounds and has respectable fuel economy of 17 mpg in the city and 24 mpg on the highway.

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

2022 GMC Sierra spotted with minimal camouflage

By all accounts, GM's current full-size truck twins, the Chevrolet Silverado and GMC Sierra, are good trucks that are in many ways competitive with the sales-leading Ford F-150 and a fresh Ram 1500 that's regularly nipping at the Bowtied truck's tailgate. Considering the cashflow generated by the segment, though, it's no surprise to see a refreshed version of the GMC Sierra testing with some light camouflage hiding some of the upgraded bits and pieces. We'll get to what we can see in just a moment, but first we'll point out what we can't see in these spy shots. What the GM pair really needs is a competitive interior. The current Silverado and Sierra are bridled by dashboards, door panels and instrument clusters that simply aren't good enough when compared to their Ram and Ford competitors. We've spoken with a few designers from GM, and they are well aware of the criticisms that have been levied at their full-size truck duo, so we'd be shocked if there wasn't a heavily revised interior lurking for the trucks' next refresh. Hopefully a future set of spy photos will give us a better look at what's inside, because from this far-away, through-the-windshield look doesn't give us much information. Will the Sierra share an interior with the redesigned Yukon? We'll just have to wait and see, but suffice it to say that any improvement will be welcome. Moving to the exterior, we can clearly see that the blocky, angular look of the current Sierra will continue through this refresh. A tiny look through the heavy tarp covering the truck's face reveals a black plastic mesh grille, but we're sure there's plenty of chrome hiding under there, too. We're left to wonder if that opening allows for a camera or radar to peek through, but rumors suggest GM's well-regarded Super Cruise could be on the menu within the next few years. We have no idea what's under this test truck's hood, but we wouldn't imagine there will be much change to the current truck's solid list of powertrain options. Here's hoping the 3.0-liter Duramax inline-six diesel engine gets the cooling it needs to raise its tow rating to match its class-leading efficiency, because it's arguably otherwise the best light-duty diesel offering in America. We know the automaker is working on electric powertrains, too, but we expect to see those debut first in the Hummer-branded truck that will be sold in GMC dealerships.