Denali Duramax 4x4 Nav Roof 20s 1-owner Z-71 on 2040-cars

Auto blog

2019 GMC Sierra carbon fiber bed: How it's made

FORT WAYNE, Ind. — The redesigned 2019 GMC Sierra has some pretty nifty features, and the one that has had the most attention is the MultiPro flipping and folding tailgate. But the Sierra also features the first-of-its-kind carbon fiber truck bed. It's interesting, of course, for its capabilities, such as being 62 pounds lighter than the all-steel box. It even adds more cargo volume since the material can be assembled and shaped differently from steel. As it turns out, the assembly process is cool, too, which we learned when GMC invited us to see the beds being made. Every GMC carbon fiber bed starts out as perfectly flat sheets of thermoplastic carbon fiber. The sheets consist of a mix of fibers and resins, a bit like the molded carbon fiber parts Lamborghini uses. The sheets are manufactured by Japanese company Teijin, which collaborated with GMC to develop the bed. They're all delivered to Continental Structural Plastics (CSP) in Fort Wayne, Ind., for construction into the actual bed. The company, a subsidiary of Teijin, makes a wide variety of composite and plastic parts for the car industry, including body panels for the C7 Chevy Corvette. The rectangular sheets are cut to shape and stacked up at a giant stamping press. Robots pick up sheets and slide them onto a conveyor that goes into a large oven. The heat softens the parts so they can be stamped. The large primary bed parts such as the base are stamped by CSP's enormous 3,600-ton press, and the smaller ones go through a 1,000-ton press. Each press can do different parts using different stamping dies, and CSP switches between dies to produce different batches of parts. After stamping, the parts roll out mostly ready for assembly, but there are rough edges that are trimmed off by water-jet cutters. These cutting machines also create holes for fasteners and for parts such as tie-down hooks and lights. The stamping process also provides the carbon fiber bed with a unique Easter egg. On the bottom of the base of the bed, there are two words: "Connors Way." This is a tribute to Tim Connors, who was the chief engineer of manufacturing at GM and a strong proponent of the carbon fiber bed. He was tragically killed in a motorcycle crash a few years ago. The words were added to honor him, and they were fortunately approved for production. There are some components to the bed that aren't stamped from the flat sheets of material.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.

Chevrolet Malibu could last until 2024 before joining the dodo

Automotive News pieced together all available intel on the Chevrolet and GMC lineups, trying to ascertain how much life each model might have left. Concerning the Chevrolet Malibu, the answer is not too much, and the historic nameplate's final years don't look like the glory kind. After a major overhaul in 2016 boosted sales for the ninth-generation sedan to 227,881 units, the 2018 sales fell to 144,542, and this year's are down almost 15% through the end of June. The Malibu is one of two Chevrolet sedans still breathing - the other being the Impala for now - but only for about five more years. AN says there'll likely be a refresh in 2022, followed by a visit from the Reaper in 2024. After that, it could be "indirectly replaced" by an electric vehicle, one of the 23 EVs that GM is working on for 2023.     The Impala will meet the ax earlier despite a recent stay of execution. Production is still set to close in January 2020. In the entire GM stable, Cadillac might soon be the only marque with sedans. The Buick LaCrosse has a date with death, and Groupe PSA won't supply Opels-as-Regals forever.  The Sonic hatchback should say goodbye at the end of 2020, a year before the seemingly eternal Spark is thought to die. Two years after that, according to one report, the Camaro will go back into cold storage, perhaps forever, and AN says an "expected redesign of the car in 2021 was reportedly canceled." Finally, let's give one final shout-out to the Chevrolet Cruze, a global nameplate, which in the United States alone outsells the Malibu, outsold the Camaro by a factor of three last year, and absolutely trounces the Impala, Sonic, and Spark. Even that couldn't get a stay of execution. In more uplifting news, everything's happening on the crossover and truck side in the next few years. The Chevy Bolt is due for a refresh next year, even though it has "become more important for self-driving ride-hailing fleets that GM Cruise plans to operate than for consumers." In 2021, the Bolt-based crossover should bow, first in China, then here. It's said to look like "a mix of the Bolt and Trax" in spy shots. Still waiting for a green light: a possible subcompact GMC crossover called Granite that might make it to market by 2023. The full-sized SUV triplets Tahoe, Suburban, and Yukon could show their new faces in 2020. The Silverado might get an updated interior in 2020 or 2021, while the Colorado and Canyon mid-sized pickups won't get attention until perhaps 2023.