2015 Gmc Sierra 2500 Sle on 2040-cars

Auto blog

2022 GMC Sierra 1500 Denali gets Super Cruise and an upgraded interior

The 2022 GMC Sierra 1500 is getting Super Cruise! Exclamation point required, because this is exciting news. Cadillac has been the sole owner of Super Cruise at GM from the start, and though we knew it was coming to the Hummer EV, we didn't know a fast-selling full-size pickup would be getting the technology. GMC says it will launch Super Cruise on the 1500 Denali, which is the most expensive and luxurious trim of the Sierra. It’s scheduled to arrive for the 2022 model year, but GMC qualifies that by saying “late model year 2022.” That means itÂ’s probably coming right toward the end, with 2023 scheduled as the first full year of Super Cruise in the Sierra 1500. GM also claims that the version of Super Cruise coming to the Sierra is capable of towing. Yes, hands-free towing, folks. WeÂ’re a little antsy, too. The tech is the same as the newest generation of Super Cruise coming in the Cadillac CT5 and CT4. ItÂ’s an improved version with more capability than the first-gen system that won AutoblogÂ’s Technology of the Year award a couple of years ago. Questions still remain to be answered, though. GM hasnÂ’t said anything about what it will cost on the Sierra 1500. WeÂ’re also left in the dark when it comes to other Sierra 1500 trim levels; and what about the Silverado 1500? It makes sense that GM would give the Sierra Super Cruise first, but itÂ’s certainly compatible with the Chevy version of the truck now, too. As for other GMC products, GM is quiet on when theyÂ’ll be blessed with Super Cruise. The redesigned Yukon would be the most obvious candidate being the flagship product, but GM says the program timing worked out best to launch on the 2022 Sierra, not the Yukon. ItÂ’s likely that the SUV will be updated with the system in the near future. Besides Super Cruise, GMCÂ’s photo also reveals that the 2022 Sierra is getting a fully digital instrument cluster. ItÂ’s surely an optional item, but could very well be standard on Denali. GM has flipped the speedometer and tachometer to opposite sides, but their digital versions still have that straight-edged GMC look to them. You can see the Super Cruise graphic in the center, and all the gauges are dropped down to the bottom of the display. But wait, thereÂ’s more. The photo also shows the beginnings of a totally new interior design, different from both the current Sierra, standard Yukon and Yukon Denali interiors. ItÂ’s immediately and obviously different everywhere we look.

2021 GMC Canyon AT4 Road Test | The everyday tool

Bold take: The GMC Canyon is the most well-rounded midsize truck. Admittedly, “well-rounded” is a lukewarm compliment, but the Canyon does nearly everything well. It is not the flashiest, which is undeniably the Jeep Gladiator. Or the most comfortable, which is the Honda Ridgeline. But for those seeking a midsize truck that looks like a truck, drives like a truck and has a solid interior, the Canyon is the right formula. We would test the 2021 GMC Canyon AT4 for a week and find that itÂ’s pleasant, capable and sturdy off-road. We would haul a bookshelf in the bed, get dirty during a woodsy soft-road jaunt and pile up the miles running around town. In short, itÂ’s exactly what most need in a midsize truck.  The AT4 model is new for 2021, and it replaces the All-Terrain model, a move GMC is rolling out across its lineup. The AT4 adds an off-road-tuned suspension with hill-descent control, beefy 31-inch Goodyear Wrangler DuraTrac tires wrapped around 17-inch aluminum wheels, standard four-wheel drive with locking rear differential and a transfer case skid plate. The AT4 punches up the CanyonÂ’s appearance with red tow hooks, dark chrome elements and a bigger grille thatÂ’s similar to the SierraÂ’s. The Canyon Denali, which was also refreshed for ‘21, is showier, but the AT4 trim feels cooler with its understated off-road vibes. Considering this, we head out for an afternoon drive along a familiar route through DetroitÂ’s northern suburbs. The Canyon is a solid daily driver. The 3.6-liter V6 rated at 308 horsepower and 275 pound-feet of torque is widely used in General Motors vehicles. ItÂ’s powerful and actually sounds pretty good — even throaty — in GMCÂ’s midsize truck. Our passengers are surprised to be pulled back in their seats during hard acceleration, and the eight-speed automatic transmission is well-calibrated for the many jobs the Canyon is called upon to perform. This powertrain, standard in the AT4 and Denali trims, is a step up from the 2.5-liter inline-four and six-speed auto offered on the lower models. ItÂ’s worth it. The 2.8-liter Duramax diesel is an option on higher-spec Canyons, and its 369 lb-ft of torque is tantalizing. For everyday use, take the V6. Our tester with the gasoline V6 and four-wheel drive can tow as much as 7,000 pounds, has a maximum payload of 1,609 pounds and has respectable fuel economy of 17 mpg in the city and 24 mpg on the highway.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.