2014 Gmc Sierra 2500 Slt on 2040-cars

Auto blog

2020 GMC Sierra 2500 HD and 3500 HD spied on public roads

We saw spy shots of the Chevrolet Silverado HD a short time ago, and now it looks like GM has got the 2020 GMC Sierra Heavy Duty trucks running around in public too. The one we're looking at here appears to be a 2500 Denali Crew Cab, distinguished easily by the same Denali grille on the 2019 Sierra 1500. Aesthetic differences between the front fascias on the 1500 and 2500 HD are small, but the 2500 is a bit more muscular in the hood and lower trim treatment. GMC doesn't look like it's hiding a whole lot with this camouflage, since the sheets over the grille and headlights are mostly transparent. The black tarp over what appears to be a hood scoop leads us to believe it will have the same type of hood design as the 2018 HD. Other interesting bits revealed here are around the rear of the pickup. We can see the same interface for the MultiPro six-way tailgate on this truck as the 1500, so at least the Denalis will have the trick tailgate (we'd expect every trim to have it, though). Just like we saw on the Silverado, the Sierra HD gets the stepside feature just ahead of the rear wheels. LED taillights are clearly visible through the thin veiling, and GM's rear steps remain as well. in addition to this 2500 HD, our spy photographers also caught a 3500 HD model. This one isn't a Denali, as the grille shows its hand again. The grille is different than any of GM's designs on the new trucks we've seen thus far, actually. GMC showed us a teaser of what a new Silverado HD grille would look like months ago, but this differs even further than that. It looks rather minimalistic under the sheet for now, with strong horizontal slats. The actual shape and design of the truck is revealed for the most part, since it's just wearing a thin body wrap. Its mirror design appears to be different from last year's, as the arm is completely solid. A sidestep right in front of the rear wheels carries over from the 2500 HD too. We imagine both this truck and the Silverado HD will debut early next year during auto show season. Related video: This content is hosted by a third party. To view it, please update your privacy preferences. Manage Settings.

GM will recall 3.5 million pickups and SUVs to fix brake issue

WASHINGTON — General Motors Co is recalling 3.46 million U.S. pickup trucks and SUVs to address a vacuum pump issue that could make braking more difficult and increase the risk of a crash. The recall, which covers 2014-2018 model year vehicles, including some Cadillac Escalade, Chevrolet Silverado, Chevrolet Tahoe, GMC Sierra, Chevrolet Suburban and GMC Yukon vehicles, was triggered because the amount of vacuum created by the vacuum pump may decrease over time, GM told the National Highway Traffic Safety Administration (NHTSA) in documents posted Wednesday. NHTSA opened a preliminary investigation into the issue in November 2018, and said it had reports of 9 crashes and two injuries related to the issue. It provided GM in July with additional field reports that prompted the automaker to open an investigation. The company did not immediately say on Wednesday how many injuries or crashes are linked to the issue but said it could impact braking in "rare circumstances." GM said dealers will reprogram the Electronic Brake Control Module with a new calibration that will improve how the system utilizes the hydraulic brake boost assist function when vacuum assist is depleted. GM said the vacuum assist pump, which is lubricated with engine oil that flows into the pump through a filter screen, can in some cases lose effectiveness over time, as debris such as oil sludge can accumulate on the filter screen. GM told NHTSA that prior model years used a different brake assist system design, and vehicles manufactured after 2018 were not equipped with the affected pump design. Recalls Chevrolet GM GMC

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.