2014 Gmc Sierra 2500 Sle on 2040-cars

Auto blog

General Motors could turn Hamtramck into its electric pickup, SUV hub

Electric off-roaders could revitalize the Detroit-Hamtramck factory that General Motors previously announced it will close. While official details remain shrouded in secrecy, analysts believe the plant will be re-tooled to manufacture at least three electric models due out during the early 2020s. The plant's scheduled closure was one of the grievances the United Auto Workers (UAW) union cited when it embarked on a 40-day strike in September 2019. General Motors agreed to keep it open without shedding much light on what it planned to build there. Analyst at LMC Automotive told the The Detroit News they believe an often-rumored electric SUV that will resurrect Hummer's name, image, or both will be one of the models assigned to the Hamtramck plant. Battery-powered variants of the GMC Sierra and the Cadillac Escalade will be made there, too, as will an enigmatic van. LMC Automotive's Jeff Schuster believes the van will come first; it could enter production as early as 2021. The Hummer — which might also be offered as a pickup — will follow before the end of 2022, while the Sierra and the Escalade will both arrive in 2023. We're taking this report with a grain of salt, though, because only one of the aforementioned models has been announced by General Motors. Rumors of a Hummer resurrection emerged in the summer of 2019, just a few weeks before we heard unverified reports of a battery-powered variant of the next-generation Escalade. General Motors confirmed plans to enter the burgeoning electric pickup truck segment, which Ford, Rivian, and Tesla also have their sights on, but it hasn't detailed how or when. The van is a mystery. General Motors refused to comment on the report. It previously announced it will keep Hamtramck open, and invest $3 billion to build electric vehicles there. The investment will create 2,225 jobs. Inaugurated in February 1985, the Hamtramck factory has churned out a diverse selection of models over the past 34 years, including Cadillac's Eldorado, Seville, and Allante, the Oldsmobile Toronado, the Buick Riviera, and more recently, gasoline-electric Chevrolet Volt. General Motors announced plans to close Hamtramck in 2018, but it quickly backpedaled and extended its lease on life until 2020 by keeping the Chevrolet Impala and the Cadillac CT6 around for a few additional months.

2020 Chevrolet Tahoe, Suburban and GMC Yukon all spied with production lights

One of our spy photographers just caught a smattering of full-size GM SUVs out testing, including the Chevrolet Tahoe, Suburban and GMC Yukon. Previous spy photos of the next-generation of these big GM SUVs have revealed that GM is going with an independent rear suspension design, and these shots confirm the news once again with our best look at the hardware yet. Check them out from the rear, lined up like ducks in a row to see the beefy control arms down there. This will undoubtedly give the big SUVs a more compliant ride, and should bring it back into touch with the refinement from the Ford Expedition and Lincoln Navigator. The new bits we get to see with these shots are production headlights and taillights that are shaping up to look pretty neat. Most distinguishable are the GMC Yukon's LED DRLs. These look a lot like the C-shaped LEDs outlining the headlights on the Sierra, but they have an extra LED strip on top of the C. The parts of the taillights that we can see look significantly different than that found on the Sierra, showing GM is planning on having a great deal of differentiation there. We can sort of see through the mesh covering the grille to what appears to be a classic horizontal bar style front opening. Chevy is predictably dialing the crazy LED strip design back for the Tahoe and Suburban. The parts that are lit up look a whole lot like the headlight fixtures on the 2019 Silverado. That truck uses a stack of lights with the actual headlights separated from the DRLs. We can see the same thing going on here, with the headlight up top and curved LED DRL strip sitting below. It's tough to say if the designs are exactly alike, but we expect to see an extremely Silverado-esque look once all the camouflage comes off. Chevrolet's taillight design differs from its donor truck like the GMC, showing off a curved, vertical series of LEDs out back. Once production lights start popping up like this, we know the vehicle is moving closer to its end game. A reveal sometime later this year could be in the cards for GM's next batch of full-size SUVs. It certainly needs them quick, as Ford rockets ahead with increased Expedition production announced earlier this week.

How the Ram Multifunction Tailgate compares to Ford, GMC, Honda

Ram just announced its Multifunction Tailgate — a descriptive if not very creative name. It's an asymmetrical barn-door arrangement, which can both fold down like a conventional tailgate or swing open like a gate. There's a new bed step, but unlike Ford or GM, the step isn't part of the tailgate itself. Rather, it kicks out from under the bumper (as opposed to out from under the driver's side of the rear bumper in its previous incarnation). So let's just focus on the tailgate functionality. A video of the Ram Multifunction Tailgate in action is above. For one, either of the swinging tailgate sections can be opened independently. They open to a full 88 degrees. In conventional flip-down mode, the tailgate works just like a normal one, too, with a 2,000-pound rating. The bottom line is that while it gives a variety of types of access to the load area, it doesn't "do" anything else. It's a $995 option on any Ram 1500. Its closest analogue is the Honda Ridgeline, which works basically the same way, but on that truck the tailgate swings as one piece. And the Honda's load rating isn't as hefty as the Ram's tailgate: 300 pounds. As Honda says, that's sufficient to hold the weight of the part of an ATV hanging out of the bed, or something similar, but it's a lighter-duty unit (and a lighter-duty truck) than the Ram's overall. Let's also get Ford's one-trick tailgate out of the way before comparing to the more analogous, and complicated, GM MultiPro. A bit of trivia: Ford's optional Tailgate Step is actually designed and supplied by Multimatic, better known as the outfit that builds the Ford GT and produces the DSSV spool-valve shocks. This step has been available for years. It pulls out of the top edge of the tailgate when the tailgate is lowered, deploying a single step. A separate handle pulls out from beside the step and flips up, giving a handhold. While it was initially (and infamously) mocked by competitors, with load floor heights as high as they are it's better than toting around a stepstool. It's currently a $375 standalone option. Now we get to the GMC MultiPro tailgate, the most complicated and multi-functioned around. It's essentially a tailgate within a tailgate, with a fold-out stopper that deploys from the inner tailgate. This gives it several functions depending on the position of all the parts. It can still be used like a normal tailgate, dropping down at the push of a button or using the key fob.