2011 Gmc Sierra 2500hd Denali, 4x4, Nav, Sunroof, Crew Cab, Chrome 20in on 2040-cars

Auto blog

GM recalling another 2.7 million vehicles in five separate campaigns

The recalls keep rolling in from General Motors, evidently keen to avoid repeating the mistakes of the ignition-switch debacle and clean house. This time they're all coming at once, with five separate recalls announced together covering approximately 2.7 million vehicles.
The largest of the five actions involves over 2.4 million units of the previous-generation Chevrolet Malibu and Malibu Maxx, Pontiac G6 and Saturn Aura in order to fix brake light wiring harness, which have been found to be susceptible to corrosion. The recall is separate from the 56k Aura sedans which GM recently recalled over faulty shift cables, not to mention the previous massive recall of 1.3 million vehicles - some of them the same models - but appears to have resulted from the National Highway Traffic Safety Administration investigation that started with the G6 almost a year ago.
The second-largest campaign involves the 2014 Chevy Malibu, specifically those fitted with GM's 2.5-liter engine and stop/start system, approximately 140,000 examples of which has been found to have problematic brakes. The issue does not appear to be connected to the recall of 8k Malibu and Buick LaCrosse sedans (also involving brake woes) which we reported upon last week. Four crashes have been reported in such models, but GM admits it's not yet clear if the problem was a contributing factor in the accidents.

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

GMC teases rugged 2021 Canyon AT4 pickup

GMC promised every model in its lineup would get the AT4 treatment by 2021. Having introduced AT4 versions of the Sierra, Acadia and Sierra HD already, that leaves the Canyon, Terrain and Yukon waiting their turn for the procedure. During a press even for the Sierra HD in Jackson Hole, Wyoming, GMC teased Canyon AT4 as next in line to receive upgraded off-road chops. The automaker had a camo'ed prototype Canyon AT4 in a trailer hooked up to a Sierra HD. When Sierra occupants pulled up the feed from the trailer-mounted camera on the infotainment screen, said occupants got a view of the masked midsize pickup between two walls reading, "The first ever Canyon AT4" and "Coming early 2020." The main mysteries are how extensive the pickup's AT4 transformation will be, and when it will go on sale. The AT4 kit changes depending on model. The Sierra AT4 upgraded performance and looks, with features like a two-speed transfer case, locking rear differential, a two-inch lift and Rancho monotube shock absorbers, skid plating, black-chrome grille and body-colored grill surround. The 2020 Acadia AT4 is mostly about looks, pairing standard all-wheel drive with black trim and wheels, and all-terrain tires. The Canyon's expected to weigh in on the Sierra end of the overhaul, and slide into the lineup between the SLT and top-tier Denali trims. The mods will put it beyond the current All Terrain trim being phased out across the lineup, but leave space between the Canyon AT4 and its Chevrolet sibling, the Colorado ZR2. GMC VP Duncan Aldred said, "They’re going to have different capability levels. The ZR2 is extreme capability. AT4 isnÂ’t positioned as extremeÂ… not intended to rival the ZR2." And the Colorado gets the even chunkier Bison version on top of that. The Canyon AT4 is predicted to join the lineup for the 2021 model year, so although it's "coming early 2020," it might not go on sale until much later in the year. GM's midsized pickup twins will be endowed with changes so mild that neither brand will classify the work with the term "midcycle enhancement." Figure a refining around the grille and lights and a few minor fillips otherwise. Next-generation models of the Canyon and Colorado aren't due until 2023, and there's apparently debate inside GM about an interior refresh for both trucks before then. The Terrain should mirror changes to the Acadia, and it would be a pleasant surprise to see the all-new Yukon also due in early 2020 get serious off-road teeth.