2004 Gmc 2500hd W/plow on 2040-cars

Auto blog

Chevrolet Silverado, GMC Sierra could get independent rear suspension

The Chevrolet Silverado and the GMC Sierra could reportedly receive a variant of the four-link independent rear suspension found under the new Tahoe and Suburban. While that's not a surprise, a recent report suggests electrification, not comfort, convinced General Motors to make the change. Replacing the time-tested solid rear axle with an independent suspension will improve comfort, handling and off-road prowess, while adding weight, and likely making the trucks a little bit more expensive. It's a fair trade-off, but GM Authority learned the real reason for the swap is that at least one of the pickups will spawn an electric model, and it's more difficult to package a bulky battery pack around a solid rear axle. The independent rear suspension takes up far less space, even if it has more moving parts. General Motors will build its first regular-production electric pickup on an evolution of the Silverado's T1 platform named BT1, according to the same source. The b stands for -- you guessed it -- batteries. The firm reportedly doesn't want to make two suspensions for cost reasons, so the independent setup will come standard regardless of whether the truck runs on gasoline, diesel, or electricity. As a bonus, Chevrolet and GMC could choose to offer their T1-based trucks with Magnetic Ride Control or an air suspension, options available on the 2021 Suburban and Tahoe. The independent rear suspension will also find its way to the next-generation GMC Yukon due to be revealed January 14, and to the 2021 Cadillac Escalade scheduled to make its debut February 4. The long-rumored, born-again Hummer will get it, too, because it will arrive as an electric model built on the BT1 platform. It's worth noting none of this is official, and General Motors has remained quiet about what's next for its new suspension design, and what will be under its electric truck's sheet metal. If the GM Authority report is accurate, the Silverado (pictured) and the Sierra could ditch their solid rear axle for the 2021 model year. The change will likely be accompanied by other tweaks inside and out. Featured Gallery 2019 Chevrolet Silverado 1500 View 16 Photos Chevrolet GMC Truck

GM cutting vehicle trim options to save money for electrification

Information continues to filter out about GM's plans based on comments the automaker made during its Capital Markets Day event in February. GM President Mark Reuss said the company's push to save money by rationalizing the number of build combinations will continue in 2020, carrying on the work done in 2019. As GM Authority covers, last year, the carmaker cut 3,500 components across model lines, a 12% drop in the number of parts it needed to stock in its plants. Reuss used the next-generation Chevolet Equinox and GMC Terrain as examples for more cost efficiencies, saying build possibilities — which include international markets and their options — will be cut by more than 50%, and use more shared parts. "We will reduce total trim levels on Equinox and Terrain from eight to six," Reuss said, "reduce engine variants from 11 to 5, reduce build combinations from more than 200 to less than 100 per program, and see significant cost savings of an already paid-for architecture that took the mass out, helping us self-fund electrification programs." GM will plow a large amount of the money it saves into its ambitious EV program. In 2017, the automaker said it intends to have 20 electric vehicles on the market by the end of 2023, some of which could be shared between brands. An automotive analyst at Seeking Alpha and a piece in Automobile attempted to put specifics to what we should expect. As Automobile points out, the first two EVs in the 20-car program are already on sale, being the Ariv Meld and Ariv Merge eBikes available in Belgium and The Netherlands. We've seen the Cruise Origin autonomous rideshare taxi, although we don't know when it will hit the road. The next three, which we should see in the metal shortly, are two Cadillac EVs and the GMC Hummer EV pickup. The Cadillac pair are expected to be sized like the XT4 and XT5, and along with the Hummer, should hit the market starting in late 2021.

GM now finishing and shipping pickups it had parked for lack of chips

DETROIT — General Motors is more than halfway through shipping newly-assembled pickups that it had parked due to a shortage of semiconductor chips, a top executive at the No. 1 U.S. automaker said on Friday. "We've made great progress," Steve Carlisle, GM's North American chief executive said at the Reuters Events Automotive Summit. "We're a bit better than halfway through that at the moment and our goal would be to clear out our '21 model years by the end of the year. We'll have a bit of a tail of '22 model years into the new year but not for too long." The global chip shortage has forced automakers like GM to idle production or in some cases mostly build vehicles and then park them until the necessary chips can be installed, allowing those vehicles to be then shipped to dealers. Last month, GM Chief Financial Officer Paul Jacobson cautioned that GM's third-quarter wholesale deliveries could be down by 200,000 vehicles because of chip shortages. He did not break out what share of that was trucks. To expedite transportation of newly-built vehicles to dealers, Carlisle said GM bought a number of car haulers to deliver them from factories or distribution centers. The Detroit automaker has also allowed dealers to pick the vehicles up themselves in some locations. Carlisle said new vehicle inventories have shrunk to below 20 days in the United States due to the supply chain disruptions, but the company wants to get that back up to 30 to 45 days with some getting to 60 days depending on the product line. GM sees sales of gasoline-powered vehicles being steady over the decade and real growth opportunity in electric vehicles and software, with one not undermining the other, he said.