1996 Gmc/ Chevy 2500 4x4 Single Cab Project on 2040-cars

Auto blog

GMC moved the headlights down on the 2024 Sierra EV to prevent glare

There are a lot of things that are different between the 2024 GMC Sierra EV’s design and the gasoline Sierra pickup, but one we noticed right away was the headlight placement. On GMÂ’s full-size gasoline trucks, the headlights are about as far up the front fascia as they can be. In the Sierra EV, theyÂ’re positioned significantly further down and into the lower bumper below the grille. Why are we highlighting this particular aspect of the design? Well, unless you only ever drive massive, high-riding trucks, youÂ’re probably very accustomed to being frequently blinded by them on the road these days. In describing the Sierra EVÂ’s headlight placement, designers told us they intentionally put the lights further down to improve matters. We pulled Phil Kucera, a GMC design manager, aside to ask him about the change. “It tends to be a better spot where itÂ’s not glaring in other peopleÂ’s eyes, right, the lower you get,” Kucera says. Beyond blinding others, putting the headlights lower on the face of the truck improves headlight performance for the driver, too. “Typically the lower the better, because thatÂ’s where theyÂ’re going to be on the road, so thereÂ’s less to reflect off of in fog or rain,” Kucera explained. “If you get them up at a certain height, theyÂ’re going to be reflecting certain things like snow, rain or things like that in your eyes.” 2024 GMC Sierra EV Denali Edition 1 View 13 Photos Of course, youÂ’ll notice on the Sierra EV that the daytime running lights (DRLs) are still big and bold in the upper part of the front end. These lights are around for decor, though, and act as pieces of design rather than a functional way to see at night. In other words, theyÂ’re lights, but theyÂ’re not going to dazzle oncoming traffic or cause glare for the driver like a headlight pointed down the road will.  Moving those lights further down in the front should hopefully be a net positive for other drivers coming across the Sierra EV and for drivers of the truck themselves. How the lights are aimed plays just as much a role in how other drivers perceive oncoming lights, though, so weÂ’ll have to wait and see the real-world performance on this one.  WeÂ’ll also note that moving the actual headlights further down the front end doesnÂ’t take anything away from the design of the Sierra EV. It still features a strong, upright stance that the world is accustomed to seeing from new trucks these days. ItÂ’s no surprise, but GM agrees.

GM reportedly developing 2.5-liter turbo four-cylinder

General Motors is allocating a massive amount of resources to developing electric technology, but it's not forgetting about the gasoline-powered cars that make up the bulk of its sales. It's reportedly designing a new 2.5-liter turbocharged four-cylinder engine based on its 2.7. Citing "sources familiar with the matter," enthusiast website GM Authority wrote that the 2.5-liter four is "in [the] final stages of development," meaning it should be announced sooner rather than later (assuming the report is accurate). Technical details are few and far between as of writing. The publication learned that the 2.5 will be part of the Cylinder Set Strategy (CSS) family of engines and that it will be mechanically related to the 2.7-liter currently found in the Chevrolet Silverado 1500, among several other models. It will feature dual overhead camshafts. It's too early to tell which models the 2.5-liter four-cylinder will end up in, or how much power it will generate. The output will likely depend on the application. For context, the 2.7 delivers 310 horsepower at 5,600 rpm and 348 pound-feet of torque between 1,500 and 4,000 rpm in the Silverado. In the smaller Colorado, it provides anywhere between 237 and 310 horsepower depending on the trim level selected. While this is pure speculation, our crystal ball tells us the engine will end up powering crossovers. It's an easy deduction to make. We can't imagine it will be offered in the Silverado, and seeing it in the Colorado is unlikely because its entry-level engine develops 237 horsepower; there's likely not much of a market for a midsize truck with 200 or so horsepower. Putting it in the Corvette wouldn't make sense and the Camaro has nearly reached the end of its life cycle without a successor planned. This leaves us with Chevrolet's range of crossovers, like the Equinox, as well as their GMC-, Buick-, and Cadillac-branded counterparts. We're not discounting the possibility that the cars set to receive the 2.5 haven't been unveiled, but those are likely crossovers, too; the odds of seeing another big Chevy sedan are very, very low. General Motors hasn't commented on the report, and it hasn't publicly announced plans to expand its CSS family of engines. If the report is accurate, we should learn more about the new turbocharged, 2.5-liter four-cylinder engine in the not-too-distant future. Featured Gallery 2022 Chevrolet Equinox RS View 56 Photos Buick Chevrolet GM GMC

Cadillac XT5, XT6, GMC Acadia recalled for two issues

General Motors is recalling three model years of the Cadillac XT5 and XT6, and the Cadillac's GMC sibling, the Acadia. The first recall has to do with the rearview camera. On 2020- and 2021-model-year XT5s, XT6s, and Acadias optioned with Surround Vision, insufficient crimping for the coaxial cables could cause a degraded signal from the rear camera, or cause the signal to fail. With all passenger vehicles required to have a working rearview camera, that's not an ideal situation. Only crossovers with Surround Vision are affected. The population at issue counts 95,231 vehicles, build dates being: XT5s produced from May 1, 2019 to June 23, 2021 XT6s built from February 25, 2019 to June 24, 2021 Acadias built from May 6, 2019 to June 24, 2021  The automaker hasn't been informed of any crashes or injuries related to the problem, and will begin mailing letters notifying owners of the issue on November 7. The fix is a trip to the dealer to have the cables inspected and replaced if necessary. Concerned customers can contact Cadillac customer service at 800-458-8006 or GMC customer service at 1-800-462-8782, then refer to GM's recall number, N222378380. Alternatively, they can get in touch with the National Highway Traffic Safety Administration (NHTSA) Safety Hotline at 888-327-4236 (TTY 800-424-9153), or go to www.nhtsa.gov, and refer to campaign number 22V709000. Another recall concerns just the 2023 Cadillac XT5 and XT6 and 2023 GMC Acadia units that were built on August 9, 2022. That day, a printer in the Spring Hill, Tennessee, Assembly Plant malfunctioned, producing vehicle labels for the driver's side B-pillar with illegible tire size information. That's a violation of a subsection of Federal Motor Vehicle Safety Standard No. 110. Only 24 units are affected, the fix being a jaunt to the dealer for a label with readable information. Owners who don't want to wait until November for letters from GM can contact Cadillac customer service at 800-458-8006 or GMC customer service at 800-462-8782, and mention recall number N222381690. Or they can head to the NHTSA Safety Hotline at 888-327-4236 (TTY 800-424-9153), or www.nhtsa.gov, and refer to campaign number 22V708000.