1979 Gmc Sierra 3/4 Ton 2wd Built 454 100% Rust Freeno Reserve Excellent Shape on 2040-cars

Auto blog

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

GMC Canyon AT4X rumored to get more extreme AEV Edition

When GMC debuted the new 2023 Canyon pickup in August, the midsize lineup gained the hardcore AT4X off-road trim the brand has been spreading throughout its wares. The new top-of-the-line model is GMC's version of the Chevrolet Colorado ZR2 and features the same off-road goodies, like the Multimatic DSSV suspension, unique front fascia, more skid plates, front and rear locking differentials, and a Baja drive mode turning the 33-inch tires. The Edition 1 launch model adds to the production goods by bolting on a front safari bar with a 30-inch light bar, a Comeup winch, an upgraded front skid plate, reconfigurable bed rails, front and rear underbody cameras, and special badging. The Canyon AT4X Edition 1 was gone almost immediately, because of course. However, Muscle Cars & Trucks reports that something just as special could be coming for buyers in the form of a Canyon AT4X AEV Edition. American Expeditionary Vehicles already breathed all over the last-gen Chevrolet Colorado and the current Chevy Silverado, looks like GM not only intends to keep the relationship going but expand it. MCT credits a source for news that the AEV-worked Canyon will get a snorkel and 35-inch tires. Chevrolet offered a snorkel as an aftermarket piece for the Colorado ZR2 Bison, and AEV sold a ZR2 Bison version with a snorkel attached. The new report claims GMC will make the elephant trunk a factory option, fitted to the driver's side this time instead of the passenger's side because of the new engine. The 35-inch tires would be a huge add-on, giving the Canyon the same kind of footprint as the Jeep Wrangler Rubicon Xtreme Recon and a couple of Ford Bronco trims. The additional two inches over the 33-inch tires on the AT4X make a big difference when the trail gets dicey. MCT says the AEV will get the same bumper as the Edition 1, which means a reduced approach angle in return for an integrated winch. The standard AT4X bumper permits a 36.9-degree approach angle, the winch-equipped Edition 1 drops that to 32.8 degrees. It's not clear which winch would hide behind that bumper, though. GMC factory fit is the Comeup Seal Slim 9.5rs rated at 9,500 pounds. AEV offers a Warn 9.5 XP-S with the same weight rating for its Colorado ZR2 Bison.  Speaking of which, since the Colorado arguably started all this, Chevy fans can expect their midsizer to acquire the same bundle as the Canyon AT4X AEV.

GMC Sierra Denali CarbonPro bed is finally, almost here

GMC revealed the Sierra 1500 with the optional CarbonPro bed on March 1, 2018. The bed wasn't available at launch, though. You can't buy it now, either, but it will hit dealerships with limited availability after production starts in early June, exclusively for the Denali 1500 and AT4 1500 trims. The carbon floor and sides replace the steel panels in a normal bed, providing "strength, durability, and scratch resistance" and a potential 59-pound weight saving, depending on the truck's configuration. To make sure the bed had a chance, development engineers replicated "extreme use scenarios" like dropping 1,800-pound gravel loads, 450-pound steel drums, and cinder blocks from various heights. They put a 250-pound man on a snowmobile with studded tracks, had him drive into the bed and then go wide-open throttle. We're told the result was "minimal scratching." On top of the extreme weather testing any vehicle goes through, the team also put a generator in the bed and aim the exhaust into a corner to ensure vibration and direct heat wouldn't deform the carbon fiber. Because of the finer shaping area-specific strength possible with carbon fiber, the bed provides one cubic foot of additional payload space by having its sidewalls pushed further out. The CarbonPro bed doesn't need a bedliner, and is grained at the top for better traction but smooth on the bottom for easier hosing down and dirt removal. Tie-downs at the front of the bed work with molded indentations to hold motorcycle tires, and slots in the sidewalls hold two-by-sixes. The truck maker says the carbon-lined payload area confers "best-in-class dent, scratch and corrosion resistance," but we suppose the nation's pickup truck army will prove that or not. The trucks likely won't have the hardest life at the start, since the Sierra Denali costs $56,790 before even a basic option like four-wheel drive. The real test probably won't come until around 2029, when third owners begin treating their aerospace-inspired thoroughbreds like dray horses.