1977 Gmc 2500 Sierra Grande 4x4 Pickup Truck on 2040-cars

Auto blog

Next-gen Chevy Silverado and GMC Sierra may use carbon fiber

It's been generally accepted that the next generation of full-size GM trucks will use some sort of strong, lightweight material for the beds while retaining steel for the cab. While aluminum seems like the most obvious choice, according to Automotive News, the Chevy Silverado and GMC Sierra will incorporate both aluminum and carbon fiber in their beds. The publication cites sources from within GM, though it seems the introduction of this comparatively exotic material mix is still a few years off. While carbon fiber is both stronger and lighter than steel and aluminum, it takes significantly more time and money to produce, essentially relegating the material to small-volume cars. The main benefit for trucks is the resulting reduction in weight to improve fuel economy without sacrificing the tough, rugged capabilities truck buyers expect. The Ford F-150 made the switch to aluminum for the 2015 model year and it's proved highly successful. It seemed like it was only a matter of time before the competition followed suit. Automotive News says that the next-gen trucks will launch with aluminum beds and that it will take a couple of years before we'll see any carbon fiber incorporated into the design. Even then, only look for the composite material on higher-trim models, with a trickle down to lower-spec trucks possible further in the future. In 2011, GM announced it was working with Japan-based Teijin Limited on a carbon fiber reinforced thermoplastic. There's a good chance that material's introduction will be on trucks. Related Video: News Source: Automotive News Plants/Manufacturing Rumormill Chevrolet GM GMC Truck

2023 J.D. Power Initial Quality Study shows there's less quality than last year

Vehicle inventory, vehicle pricing, and the supply chain are finally showing improvement. Vehicle quality, on the other hand, is still going the wrong way. That's the takeaway from the 2023 J.D. Power Initial Quality Study that found overall problems exceeded last year's record high. The study surveyed owners of 2022-model-year vehicles to assess the average rate of problems per 100 vehicles (PP100) during the first 90 days of ownership. The average figure for the 32 ranked manufacturers in 2020 was about 166 problems per 100 vehicles. In the 2021 IQS, that dropped to an average of 162. For 2022, the average jumped to 180 problems. For 2023, the PP100 is up to an industry average of 192 — an increase of 30 problems per 100 vehicles in just two years. Let's get to the good news first: Dodge reclaimed the crown of having the lowest number of problems per 100 vehicles at 140. Buick won last year with 139 PP100, falling to third this year. Dodge was the first American automaker to top the IQS in 2021. Its return as the least problematic gives parent company Stellantis three wins in four years after Ram was crowned in 2021. It also gives U.S. brands a four-peat after Buick topped the chart in 2022 by having owners report the fewest problems. This year's top 10 is Dodge, Ram, Alfa Romeo, Buick, Chevrolet, GMC, Porsche, Cadillac, Kia, and Lexus. Stellantis gathered a few feathers for its cap, in fact. Maserati showed the largest improvement year-on-year, followed by Alfa Romeo, and Alfa Romeo posted the lowest PP100 among the premium class, beating Porsche and Cadillac. Alfa Romeo has been vocal about working to improve quality, mentioning Lexus as a target. Last year the Japanese brand finished sixth, the Italians finished near the bottom, between Jaguar and Mitsubishi. This year Alfa jumped to third, Lexus dropped to tenth. Ram was the third-best on the list of improvers from 2022 to 2023.   The individual model with the lowest PP100 is the Nissan Maxima. Now for the troublesome bits. In the words of Frank Hanley, senior director of auto benchmarking at J.D. Power, "The industry is at a major crossroad and the path each manufacturer chooses is paramount for its future.

GM resumes production of its 3.0-liter turbodiesel straight-six

General Motors temporarily stopped taking orders for trucks and SUVs equipped with the 3.0-liter Duramax turbodiesel six-cylinder engine in August 2021 due to a supplier shortage. Reports claimed the pause would last through 2021, but the engine is already back in production. Enthusiast website GM Authority learned from sources inside General Motors that the straight-six is once again coming off the assembly line at the Flint Engine Plant in Flint, Michigan. There's no official word on precisely what the problem was linked to and whether it was related to the on-going chip shortage that's wreaking havoc across the automotive industry. All we know is that the pause lasted for about two weeks. Called LM2 internally, the six is available in Chevrolet's Tahoe, Suburban, and Silverado 1500 and in GMC's version of these trucks. It's also an option in the Cadillac Escalade. It develops 277 horsepower at 3,750 rpm and a V8-like 460 pound-feet of torque at 1,500 rpm in every application, and it allows these big behemoths to post surprising fuel economy numbers. Fitted to a rear-wheel-drive Tahoe, the Duramax returns 21 mpg in the city, 28 mpg on the highway, and 24 mpg in a combined cycle, figures that make it more efficient than a Blazer. Demand for the diesel-powered trucks is relatively high. While the shortage undoubtedly took a toll on sales, the Duramax represented 8% of Suburban sales and 6% of Tahoe sales in May 2021. There are no other diesel-burning full-size SUVs available new so they have the market to themselves. On the truck side, Ram still makes the EcoDiesel available on some 1500 trims but Ford abandoned the segment. Related Video: Featured Gallery 2021 Chevrolet Tahoe RST View 24 Photos Chevrolet GMC Truck SUV Diesel Vehicles