01 Sierra Crew Cab 4x4 6.0l V8 Engine Gas on 2040-cars

Auto blog

2020 Chevy Trax spied sporting design cues from the new Blazer

We saw spy shots in August for what we thought was either a redesigned Chevrolet Trax or new GMC subcompact crossover. At the time we were leaning Chevy. But after this latest batch of spy shots taken near GM's proving grounds, we're now thinking this one is the Trax replacement and the other one was a GMC. For one, the thin row of LEDs looks remarkably similar to the 2019 Chevy Blazer's LED strip. The additional light slightly below that is similar to the Blazer as well, leading us to believe that the next Trax will have a Blazer-esque front end. At first glance, this vehicle looks slightly larger than today's Trax with a much brawnier shape than the current blob-like design. The rear roof cladding could be hiding the same sloped rear window with spoiler hangover we see on the Blazer. Circling back to the other small GM crossover we caught testing, this one doesn't have those Blazer elements. The curved windshield and sloping roof are like those of the GMC Terrain, as are the horizontal grille bars. By contrast, the above car has a straighter windshield and a roof shaped more like the Blazer. One element that does seem to diverge from the new Blazer are the taillights, but they don't exactly look production-ready anyway. If we're right about this being the next Trax (and we're pretty sure we are) then this looks to be a more distinctive vehicle than what it will replace. The mirrors have left their awkward spot on the doors, and it's shaping up to be a much sportier looking crossover as a whole. This vehicle will most likely end up being a 2020 model year car, and if so, we would expect to see undisguised photos of both it and the assumed GMC version next year. Related Video: Featured Gallery 2020 Chevrolet Trax spy shots Spy Photos Chevrolet GMC Crossover SUV Future Vehicles chevy trax

GM delays 3.0-liter Duramax diesel in Silverado and Sierra pickups

Stricter testing protocols around the world are making it harder for automakers to predict launch timelines. GM is the latest to get caught in emissions nettles, the Detroit carmaker forced to delay the launch of its new Duramax 3.0-liter inline-six diesel for the Chevrolet Silverado 1500 and GMC Sierra 1500. That's what company reps told dealers in a memo seen by Automotive News this week. Dealers and buyers had been promised the Flint, Mich.-built oil-burner in early 2019, but AN wrote that the EPA certification hiccup has turned into a "slight delay." A GM spokesman told Motor1, "[We] did not attribute [the delay] to a single entity, as the truth is this is a collaborative effort between GM and several government entities. We will make the 2020MY Duramax available for dealers orders soon, and expect to deliver the first trucks to customers soon after emissions testing is complete." We know the new 3.0-liter Duramax diesel has 277 horsepower and 460 pound-feet of torque, outdoing Ford's 3.0-liter PowerStroke diesel by 27 hp and 20 lb-ft. But without final EPA paperwork, GM can't release the numbers that will show how the two engines stack up when considering fuel economy and tow ratings. The certification process has been sticky for a few other makers of late, especially since the Volkswagen Group situation in 2015. BMW had to delay the launch of four diesel models in 2016 over EPA testing. The new Ram 1500 dribbled out in a trickle last year for reasons thought to deal with EPA testing, coming as it did a year after the EPA investigated Ram's EcoDiesel engines in 2017 and 2018. More recently, WLTP testing in Europe caught out just about every automaker over there. Since we're almost halfway through 2019, the delay until the 2020 model year is only a few months. Still, GM told dealers to cancel any orders for the engine for this model year. Dealers will need to resubmit the orders once opening begins, but GM hasn't said when production will begin other than "soon." The company said that it will offer 2020-model-year replacement vehicles to customers and dealers. If prices hold into the next model year, the 2020 Silverado 1500 and Sierra 1500 with the inline-six diesel will come at a $3,890 premium over the 2.7-liter turbo four-cylinder, and a $2,495 premium over the 5.3-liter V8.

GM trucks get hybrid versions, but you'll probably never see one

A few years ago, General Motors sold hybrid versions of its Chevy Silverado and GMC Sierra pickups. They weren't very good, using GM's old two-mode hybrid system that resulted in only negligible fuel economy gains. But GM's trying again, launching eAssist models of the 2016 Silverado and Sierra that are said to offer 2-mpg improvements in city, highway, and combined fuel economy ratings. Problem is, you probably won't be able to get one. Only 700 eAssist trucks will be made for the 2016 model year – 500 Silverados and 200 Sierras. When you consider that GM moved 824,683 examples of its light-duty pickups in 2015, this small run represents 0.08-percent of all Silverado/Sierra production, and GM says it "will monitor the market closely ... and adjust as appropriate moving forward." But that's not the only limitation. The eAssist trucks will only be sold through California dealers. For the Silverado, eAssist can only be optioned on the 1500 Crew Cab 1LT 2WD model, and for the Sierra, the fuel-saving technology is solely available on the 1500 SLT Crew Cab 2WD model with the SLT Premium Plus package. Granted, in terms of the Sierra, that means you get niceties like LED headlights and taillights, Apple CarPlay and Android Auto, Bose premium audio, heated seats and steering wheel, lane keep assist, and more. In the trucks, eAssist combines a small electric motor and 0.45-kWh battery pack with the pickups' 5.3-liter V8. GM estimates total output of 355 horsepower and 383 pound-feet of torque – no more horsepower than the non-eAssist trucks, but three more pound-feet of torque. GM says the eAssist trucks can tow up to 9,400 pounds, and the battery only adds 100 pounds to the trucks' weight. The electric motor provides 13 hp and 44 lb-ft of torque for a boost of acceleration off the line, or during passing. It also allows the engine to run in four-cylinder mode for longer periods of time. eAssist uses regenerative braking to help power onboard electrical systems, and adds start/stop to the powertrain. Finally, the so-equipped trucks have a six-percent improvement in aerodynamics, thanks to a soft tonneau cover and active grille shutters in the front fascia. Great news is, the eAssist option is relatively inexpensive, only costing $500. But good luck getting your hands on one.