Sle Z71, Crew Cab, 4wd, 5.3l Flex Fuel, Tow Package on 2040-cars

Auto blog

Chevy Tahoe-to-K5 Blazer conversion shop renders Jimmy option

Back in 2019 we told you about a truck that looked like a K5 Chevy Blazer, but was actually a modern late-model Tahoe underneath. It was the product of Arkansas shop Flat Out Autos, which reskinned modern GM full-size SUVs to look like their predecessors. Now, the same shop is planning to release a GMC version, converting Yukons to Jimmys. We were impressed by Flat Out's workmanship, beautifully blending the lines of the Blazer into those of the Tahoe. The result was a cohesive design, not just a panel swap. It clearly required a lot of work, which helped justify the $69,000 price tag, not including the cost of the donor Tahoe. FlatOut Autos GMC Blazer Tahoe reskin 01 View 11 Photos At least one new owner was so impressed that they recently purchased four identical Blazer conversions at once. The quadruplets were all finished in blue with a white roof and all based on brand-new 2020 Tahoes. Obviously, with such demand it was only natural for Flat Out to explore other options. On Facebook the company said it was working on a 1972 version with an eggcrate grille. Now, they've also released a rendering paying homage to the K5 GMC Jimmy. The Jimmy conversion uses the original's quad-headlight face, crosshair grille and GMC badging. Like the Blazer conversion, it adds chrome bumpers and milled door handles while adapting the original's 2-door design to the new truck's 4-door body. The rendering only shows the front three-quarter view, but presumably a new carbon fiber rear door would have to be created as the Blazer's says "Chevrolet" across the back. Flat Out says that all the modern conveniences found on the donor Tahoe will work on the conversion, including parking, blind spot and lane keeping sensors. If you have the coin, it's a great way to have retro style without giving up modern safety and performance. The new Blazer has been disappointing to many fans that had hoped for a Bronco-like SUV. Instead, GM gave us a crossover. The Flat Out conversions might be a good compromise, and expanding it to the GMC brand only makes sense. Obviously there's no requirement to use a GMC Yukon as the donor vehicle for the Jimmy, as it's functionally identical to a Tahoe, but wouldn't you want to keep it in the family? Related Video:

Next-generation GMC Canyon, Chevy Colorado spied together

With the debut of the next-generation GMC Canyon coming in a couple of months (in off-road-ready AT4 guise no less), it's no surprise that both it and the Chevy Colorado are out testing without the heavy coverings of early prototypes. One of our spy photographers caught examples of both trucks with close-fitting vinyl wraps. This gives us a great opportunity to see each pickup more clearly, but also to compare and contrast the designs. From the front, the GMC features a narrower, but seemingly taller grille. At the top are slender lamps. They seem to be daytime running lights, though, and below them are much larger units that will function as the actual headlights. The prototype shown seems to be one of the AT4 variants, based on the lack of a lower air dam and the opened up corners of each bumper. Small fog lights show up in the lower bumper, too. As for the Chevy, its grille is wider, and it blends into the headlights. The lights are at the top of the grille, and they seem to incorporate the actual headlights, not just running lamps. The grille mesh has some interesting detailing, and there are auxiliary lights below the main headlights. This one seems to be a more mainstream Colorado model since it still has a front air dam, possibly a Z71 model, considering the chunky tires. Not surprisingly, the two trucks are very similar from the sides and the rear. They have cabins that look lower, longer and more squared-off than the current models. The fenders look more punched out and aggressive, too. The main differentiator between the Chevy and GMC are the wheel openings. The GMC has sharp corners and the Chevy has more rounded ones, as is the case with the full-size trucks. As previously mentioned, the GMC Canyon AT4 will be revealed this summer, so likely in just a month or two. The Colorado will likely be revealed this summer, too. It's expected that it will use the turbocharged 2.7-liter four-cylinder shared with the Silverado. Naturally, it will be available with two- and four-wheel drive and a variety of trim levels including the AT4 and ZR2 off-road versions. Related video:

GM doubles miles open to its Super Cruise technology

DETROIT — General Motors said on Wednesday owners of certain vehicles equipped with its Super Cruise assisted driving system will now be able to use it on 400,000 miles (643,740 km) of North American roads, doubling the current operating area as Tesla and other automakers race to deploy hands-free cruising technology. GM's Super Cruise system, like Tesla's Autopilot system, is a driver assistance system, and does not enable true autonomous driving. Spurred by Tesla's aggressive deployment of Autopilot, and Tesla Chief Executive Elon Musk's promises of a more advanced "Full Self Driving" system, GM, Ford, Volkswagen and Mercedes-Benz are racing to deploy competing partial automation technology in major markets. At the same time, safety regulators are showing concern that drivers do not understand that Autopilot and similar systems are not designed to take over driving in every circumstance. The GM system's sensors and software allow a motorist to cruise with hands off the wheel on highways that have been mapped in detail. But the driver is expected to stay alert and ready to take over the car. GM uses technology to monitor the driver, and Super Cruise will sound alarms or slow the car to a stop if it detects that a driver is not responding. Starting later this year, GM plans to enable vehicles equipped with Super Cruise and the company's latest vehicle electronic system to operate hands-free on major, undivided highways in the United States and Canada, as well as additional miles of divided, interstate highways. Currently, Super Cruise operates only on interstate, divided highways. The expansion, enabled by wider digital mapping, will allow owners of properly equipped GM vehicles to cruise hands-free on stretches of Route 66 and the Pacific Coast Highway in the U.S. West or the Trans-Canada highway in Western Canada, GM said. Many of the new roads GM has mapped are in rural, heartland states where GM pickup trucks are popular. GM plans to offer Super Cruise as an option on its Chevrolet Silverado and GMC Sierra large pickups later this year. GM has said previously it intends to offer Super Cruise as an option on 22 models by the end of 2023. Depending on the model, Super Cruise costs $2,200 to $2,500 to add as an option. (Reporting by Joe White in Detroit; Editing by Matthew Lewis) Related video: Cadillac Chevrolet GM GMC Technology Super Cruise